海洋石油管道单点提升分析

基于管道微单元体平衡建立了海管单点提升的非线性力学模型的控制微分方程组 ,使用变弧长的无量纲代换将动边界问题化为固定边界的两点边值问题 ,利用Maple环境下编制的两点边值问题的打靶法程序得到了该问题在各个提升阶段的数值解答和在单点提升过程中管道的极限弯矩约为 0 .71q1 3(EI) 2 3。     

Seasonal and annual variations of marine sinking particulate flux during 1993~1996 in the central South China Sea

A total of 67 samples from the upper and lower sediment traps in the central South China Sea were analyzed, which were collected during 1993~1996. It is indicated that the distribution of stable isotope values, surface primary productivity, fluxes of total particulate matter, carbonate, biogenic opal, organic carbon, planktonic foraminiferal species and their total amount exhibit obviously seasonal and annual fluctuations. High values of the fluxes occurred in the prevailing periods of the northeastern and southwestern monsoons, and the low values occurred during the periods between the two monsoons. The fluxes of some planktonic foraminiferal species (Globigerinoides sacculifer, G. ruber, Globigerinita glutinata, Neogloboquadrina dutertrei) and their percentages also exhibit two prominent peaks during the prevailing periods of the northeastern and southwestern monsoons respectively, while those of Globigerina bulloides, Globorotalia menardii and Pulleniatina obliquiloculata only exhibit one peak in the prevailing periods of the northeastern monsoon. In addition, fluxes and percentages of Globigerinoides sacculifer and Globorotalia menardii as well as the fluxes of carbonate and total amount of planktonic foraminifera decrease gradually from 1993 to 1996, and those of Globigerina bulloides, Globigerinita glutinata and biogenic opal increase gradually from 1993 to 1996. The fluxes of carbonate and organic carbon in the upper trap are higher than those in the lower one. The study indicates that the seasonal and annual variations of the sediment fluxes and planktonic foraminiferal species are mainly controlled by the changes of surface primary productivity and hydrological conditions related to the East Asian monsoon. The lower carbonate and organic carbon fluxes in the lower trap are related to the dissolution.     

噪声信号源超磁致伸缩换能器设计方法研究

针对以往噪声信号发射换能器在实际工作中,存在着诸多影响正常科研试验的问题,并根据噪声信号的技术要求,以及探测方式的技术特征,我们对噪声发射换能器进行了重新设计,从选用超磁致伸缩材料作为换能器的材料入手,结合国内外一些新的设计理念,从材料性能分析,到理论设计,最后到可靠性实施方法,都进行了周密细致的研究,并完成了设计全过程。测试结果和使用性能表明,达到了预期的目的,这也是该材料在国内首次应用于单只宽频水声换能器中,开创了稀土超磁致伸缩材料应用的又一个先列。     

Effect of free surface and strut on fins attached to a strut

An extensive experimental and computational investigation of the combined and separate effects of free surface and body on the lift characteristics of a pair of fins attached to a strut and fin alone is conducted. The results reveal that the free-surface effect becomes significant when the depth of submergence to chord ratio (H/c) is less than three. The effect of the strut is also realized for shallower depth of submergence of the fins through free-surface deformation leading to a significant change in the incidence angle of the flow to the fins. The numerical results based on the Higher Order Boundary Element Method with the linearized free-surface condition show good agreement with the experimental results for fin (foil) alone even at shallow submergence, but some discrepancies appear for the fin attached to the strut at higher speeds mostly due to the neglect of the nonlinear free-surface effect.     

基于二次散射的水污染遥感模型及其在珠江口水域的应用

根据水中悬浮物、污染物和水分子等的散射和吸收物理机制建模是实现水污染定量遥感的有效途径.基于一次散射的水污染遥感模型简单易行,但在浑浊度较大时其精度不高.在基于一次散射模型的基础上分析了多次散射的能量组成特点,提出再考虑二次散射可使模型的精度显著提高且不至于使模型过于复杂;导出了二次散射的补偿因子,同时给出了考虑二次散射因子的简单计算方法.将该模型应用于珠江口水域的水污染遥感的结果表明,较之基于一次散射的模型,考虑二次散射的水污染遥感模型在精度上有明显改进.遥感提取结果显示,珠江口水域重污染区主要分布在伶仃洋东北部,香港维多利亚港和深圳湾.     

流动注射-氢化物发生原子荧光法测定海洋沉积物样品中痕量铅

铅是一种具有累积性的有害元素,是海洋监测调查中沉积物介质的必测元素之一,常用测定方法有双硫腙分光光度法、火焰原子吸收光谱法、无火焰原子吸收光谱法等[1],前两种方法灵敏度较低,测定时一般需要预富集,操作较繁琐;后一种方法虽然灵敏度高,但仪器昂贵,对操作人员要求高.氢化物发生原子荧光法由于灵敏度高、检出限低且线性范围宽,在铅的分析中日益被重视.     

现场海水中有机污染物光学测量方法研究

介绍了一种用光学方法对海水中的有机污染物（主要包括：叶绿素-a、黄色物质、石油）进行测量的光学系统，该系统可同时测量海水中多种有机污染物的种类和浓度。     

温度、pH和金属离子对仿剌参蛋白酶活力影响的研究

利用分光光度计比色法测定了温度、pH值和Hg^2＋等9种金属离子对体长24．2cm±0．7cm仿刺参（Apostichopus japonicus）消化道中蛋白酶活性的影响。结果表明，蛋白酶的最适温度为40℃，对热不稳定，最适pH为7．2。Hg^2＋，Mn^2＋，Ag^＋，Pb^2＋，Ba^2＋，Ca^2＋对蛋白酶的活性有抑制作用，抑制作用由强至弱依次为Hg^2＋〉Ag^＋〉Mn^2＋〉Pb^2＋〉Ca^2＋〉Ba^2＋，其中Hg^2＋和Ag^＋与对照差异极显著（P〈0．01），表现出极强的抑制作用；Cu^2＋，Zn^2＋，Mg^2＋则对酶活有一定的促进作用，其促进作用大小依次为Mg^2＋〉Zn^2＋〉Cu^2＋，Mg^2＋与对照差异显著（P〈0．05）。     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

Experimental Investigation into the performance of the Axial-Flow-Type Waterjet according to the Variation of Impeller Tip Clearance

The tip clearance inside the duct from the tip of the impeller is very important to the performance of waterjet systems, which fact has been proven in the pump field. The tip clearance is especially important on the model scale because it is very difficult in manufacture to keep the tip clearance constant and minimally small along the inside of the duct. In the present study, a flush-type waterjet propulsion unit (duct, impeller, stator, and nozzle) was designed for an amphibious tracked vehicle. Two impellers of different inner diameter were designed and manufactured in order to investigate the gap effect. Resistance and self-propulsion tests with a 1/5-scale model were conducted in PNU towing tank. The flow rate at the nozzle exit, the static pressure at the various sections along the duct and also the nozzle, the revolution of the impeller, and the torque, thrust, and towing forces at various advanced speeds were measured. Based on these measurements, the performance was analyzed according to the ITTC 96 standard analysis method. Based on this analysis method, the full-scale effective and delivered power of the tracked vehicle was estimated according to the variation of tip clearance.