Quantitative classification and analysis on plant communities in the middle reaches of the Tarim River

Plant communities were sampled in the lower reaches of the Tarim River, Xinjiang. The results showed that there are 23 species belonging to 21 genera in 11 families, most of which have low occurrence frequency in quadrats. The most common species is Tamarix ramosissima, which occurred in 17 sites accounting for 89.47% of the total 19 sites. Quantitative classification (TWINSPAN) and ordination (CCA) methods were used to study the distribution patterns of 23 plant species in 19 sites in this valley. TWINSPAN results showed that the plant communities in the middle reaches of the Tarim River could be divided into 3 groups and the sampling sites could be divided into 7 types in 3 groups. CCA results were consistent with TWINSPAN results, and showed species distribution patterns correlated with major environmental variables of groundwater level and soil moisture.     

Water discharge changes of the Changjiang River downstream Datong during dry season

Based on hydrometric data and extensive investigations on water-extracting projects, this paper presents a preliminary study on water discharge changes between Datong and Xuliujing during dry season. The natural hydrological processes and human factors that influence the water discharge are analyzed with the help of GIS method. The investigations indicate that the water-extracting projects downstream from Datong to Xuliujing had amounted to 64 in number by the end of 2000, with a water-extracting capacity up to 4,626 m3/s averaged in a tidal cycle. The water extraction from the Changjiang River has become the most important factor influencing the water discharge downstream Datong during dry season. The potential magnitude in water discharge changes are estimated based on historical records of water extraction and a water balance model. The computational results were calibrated with the actual data. The future trend in changes of water discharge into the sea during dry season was discussed by taking into consideration of newly built hydro-engineering projects. The water extraction downstream Datong in dry season before 2000 had a great influence on discharges into the sea in the extremely dry year like 1978-1979. It produced a net decrease of more than 490 m3/s in monthly mean discharges from the Changjiang into the sea. It is expected that the water extraction will continually increase in the coming decades, especially in dry years, when the net decrease in monthly mean water discharge will increase to more than 1000 m3/s and will give a far-reaching effect on the changes of water discharge from the Changjiang into the sea.     

大功率激电在双阳煤田找矿应用

大功率激电法在双阳煤田找煤的应用中,证实了山河推覆构造的存在;在充分研究工作区的地质、地球物理特征前提下,恰当地选用了方法技术,并正确理解异常的地质、地球物理意义,取得了较好的找煤效果,在Ⅰ号剖面的激电异常上经钻探和坑探证实磨盘山组灰岩下存在质量较好的可采煤层。     

平湖油气田凝析油回注油藏对开发效果影响机理研究

凝析油回注油藏是平湖油气田开发过程中为应对海底输油管线而采取的一种工程应急措施。凝析油回注油藏会引起油层内流体渗流特征的变化，并进而影响油井恢复生产后的开发指标。从室内物理模拟实验和油藏数值模拟两方面开展凝析油回注油藏的影响效果分析，并根据研究结果提出合理的回注方式，不仅从机理上为解决海上油气田开发工程中所遇类似突发事件的处理提供了依据，而且在物理模拟实验和油藏数值模拟研究相结合对油藏基础研究方面提供一些重要的结论。     

黔西南地甲病重病区与环境地球化学关系研究

贵州是我国碘缺乏病严重地区之一，特别是黔西南地区。本根据含碘量的调查，编制了贵州露头地层、地表土壤和地表水中含碘量分布图，并与地甲病患病率分布图进行对比研究。研究表明，地甲病患病率与露头地层中碘含量关系不明显，地表土壤中碘含量与地甲病患病率有一定关系，而地表水中碘含量与地甲病患病率关系较为密切，地表水中含碘量高的地区，地甲病患病率就低，反之则地甲病患病率高。     

饱和土一维简谐响应解析解的求解和应用：II 应用

将相关论文[1]中得到的饱和土一维简谐响应解析解，应用到饱和土中两类压缩波的独立作用、饱和土中波的传播速度、u-p方程的适用范围等研究中。在两类压缩波的独立作用研究中，克服了以前文献中的数学不严密性。研究了饱和土各参数对三种体波波速的影响。通过比较u-w和u-p方程的解答，定量地说明了u-p方程的适用范围。     

真空-堆载预压处理高速公路软基的有限元计算

根据高速公路路基的变形特点，提出了真空-堆载联合预压法处理软基的三维Biot固结有限元计算模型，将砂井按照实际尺寸划分单元，避免了平面计算方法中的砂井处理的问题，较以往的平面数值方法更接近实际情况。结合修正剑桥模型，对某真空-堆载联合预压试验段进行了计算、分析，结果令人满意。     

50a来洮河流域降水径流变化趋势分析

洮河流域 40多年水文实测资料分析表明 ,由于受气候变化及人类活动影响 ,流域降水和径流特征发生了明显变化 ,降水与径流总体呈下降趋势 ,其下降的线性斜率分别为 - 0 .86～ - 1.34mm·a-1和 - 1.5 7～ - 3.36m3·s-1·a-1;而气温呈缓慢上升趋势 ,其上升的线性斜率为 0 0 2℃·a-1.降水的减少和温度的升高已经导致甘南草原荒漠化 ,使许多湿地和湖泊干涸 ;径流的减少和温度增加在近2 0a来有进一步加剧的趋势 .     

论桩基施工中流砂现象处理

地下水流动对土体产生渗透力；当渗透力大于土体的抗剪强度，土体破坏，也就是当施工造成地下水水力坡度超过砂层的临界水力坡度即产生流砂现象．运用水文地质工程地质学方面的原理其处理方法有两类：—是莫尔一库仑法：即c法和φ法；二是临界水力坡度法(Ic法)．     

机械卡盘设计中的计算误差分析与应用

通过对普通机构二维力因素影响的分析，利用修正公式计算求值，以修正单因素影响最大值计算所产生的误差。利用这一计算方法，对CD—3型钻机卡盘进行了计算，得到了正确的设计结果，说明用修正公式对多因素影响采用单因素影响最大值计算进行修正是可行的。