青藏高原新生代古高度研究：现状与展望

青藏高原新生代古高度研究是地球系统科学研究中的一个热点、难点和重点,它是解决地球深部动力学、地貌地形演化和气候变化等各部分相互关系的一个关键突破口。目前以古生物和氧同位素为代表的各种古高度计被用来重建青藏高原新生代的古高度历史,但是不同的研究方法所得到的结果并不一致,关于青藏高原何时隆升到现在的海拔高度存在晚上新世、晚中新世和始新世等不同认识。因为古高度结果的差异,所以对于青藏高原新生代的构造隆升过程和动力机制也存在大的争议。本文首先详细的阐述了部分古高度计的应用原理及其各自的优缺点,收集总结了78条青藏高原古高度研究的成果,梳理了目前青藏高原新生代古高度研究的历史和现状。然后在此基础上讨论了目前高原古高度研究的特点和存在的问题,即地层年代学、氧同位素和古生物古高度计结果的协调、“以点带面”、区域研究程度差异较大、替代性指标的多解性、古纬度影响、地质时期温度递减率的不确定性、全球气候变化的影响等特点和问题。最后就存在的特点和问题指出在恢复青藏高原新生代古高度时所需要完善和注意的方面,其中最重要的是注重地层年代学的可靠性。     

A Comparative Study of the Coal‐forming Characteristics of Marginal Sea Basins and Epicontinental Sea Basins

The coal-forming characteristics,as well as the similarities and differences between epicontinental sea basins and continental marginal sea basins developed during different time periods,were analyzed in this study by adopting comparative analysis thoughts and methods.The results obtained in this study revealed that epicontinental basins and marginal sea basins are both characterized by the main development of thin coal seams or extremely thin coal seams.In addition,changes in sea levels were determined to be the main controlling factors for coal formation,and there were similarities in the continent-sea interactions and coal-forming sedimentary systems of the different basins.However,there were also significant differences observed in the sea level change events,basin basement structural characteristics,coal seam stability levels,accumulation and aggregation characteristics,and the migration patterns of coal-forming materials.For example,the marginal sea basins in the South China Sea were found to be characterized by strong tectonic activities,diversity and complexity.The basin structures showed complex patterns of depressions,uplifts and concave or sag uplifts,which tended to lead to greater complexity in the paleogeographic patterns of the coal formations.This had subsequently resulted in complex coal-forming processes and paleogeographic characteristics,in which the coal-forming zones displayed bead-like distributions,and the enrichment areas and centers were scattered.The practical significance of studying the similarities and differences of the coal-forming characteristics between epicontinental basins and marginal sea basins is that the results can potentially be used to guide the predictions of coal-measure coal seam distributions in South China Sea,as well as provide valuable guidance for future explorations of natural gas reservoirs related to coal measures in the South China Sea area.     

湿陷性黄土边坡预应力锚索耐久性与改善措施研究

随着预应力锚索在湿陷性黄土边坡加固工程中的广泛应用,其耐久性问题就变得日益突出,湿陷性黄土边坡预应力锚索出现了较多因预应力损失而引起的失效事故。基于湿陷性黄土边坡预应力锚索运行现状进行研究,研究表明:黄土腐蚀性对边坡预应力锚索耐久性影响微弱,黄土湿陷性和地质条件变化对边坡预应力锚索耐久性影响显著;通过采用加强排水措施、提升浅部注浆工艺和注重运行维护等措施可以改善湿陷性黄土边坡预应力锚索耐久性;改善后的预应力锚索在监测期内处于平稳波动的服役状态,运行效果良好。本研究以期为湿陷性黄土边坡预应力锚索的设计、施工和运行维护等提供借鉴。     

基于KronosFlow软件对逆冲推覆带构造-热演化的初探

盆地模拟是含油气盆地勘探评价的重要技术方法之一,然而传统的盆地建模2D模拟技术仅适用于拉张型盆地,使得挤压型盆地横向上的热史重建一直是个难题,从而制约了进一步的油气勘探。目前由法国Beicip-Franlab公司设计的KronosFlow软件突破了传统盆模软件对逆冲推覆带、盐构造和泥底辟等复杂构造的局限性,精确控制了横向和垂向上的构造位移,通过跟踪单个网格连续运动形态、恢复侧向变形量以及与TemisFlow软件无缝衔接,实现了对挤压型盆地埋藏史、热史、生排烃史以及油气运聚史的恢复。以塔里木盆地北缘柯坪逆冲推覆带和库车逆冲推覆带为例,利用KronosFlow软件定量反演了新生代以来的构造-热演化历史,并以实测数据约束并验证挤压环境下盆地模拟结果的有效性。柯坪逆冲推覆带的依木干他乌断层在40~30 Ma再次活动,断层附近志留系—泥盆系的温度大于85 ℃,柯坪塔格断层在15~10 Ma活动,断层附近志留系—泥盆系的温度小于70 ℃,寒武系（烃源岩成熟度为1.3%~1.7%）和奥陶系（烃源岩成熟度为0.7%~1.2%）烃源岩热演化程度高,生烃能力强。库车逆冲推覆带侏罗系北段温度介于50~70 ℃,南段温度介于210~230 ℃,盐构造造成地温异常,其中秋里塔格构造带膏盐岩最厚,降温效果最明显。      

六盘山区夏秋季大气水汽和液态水特征初步分析

六盘山区是中国典型的农牧交错带和生态脆弱带,也是黄土高原重要的水源涵养地、生态保护区及国家级扶贫开发区。利用2017年6-11月隆德气象站地基多通道微波辐射计资料,结合同期平凉探空站及隆德地面降水等观测资料,分析了六盘山区夏秋季大气水汽、液态水变化特征。结果表明：六盘山区夏秋季在降水天气背景下,大气水汽含量和液态水含量均较高,分别为无降水天气背景下的1.4倍和7.0倍;降水天气背景下水汽在5000 m以下有明显的增加,且在此高度范围内的水汽密度随高度的递减率比无降水天气背景下明显偏小;各高度层的液态水相比无降水天气背景下均有明显增大,除6月外,主峰值均出现在0℃层高度层以下。六盘山区夏秋季各月中,6-9月。大气水汽含量高值区均出现在正午到傍晚时段,低值区均出现在日出前后;液态水含量在日出前、午后及傍晚分别出现峰值,最明显的峰值出现在午后。对一次对流性降水天气过程分析后发现,降水发生前40 min大气水汽含量和液态水含量出现两次明显的跃增,水汽向上输送不断加强,2500-7500 m高度的相对湿度明显增大。     

A Numerical Investigation on Microphysical Properties of Clouds and Precipitation over the Tibetan Plateau in Summer 2014

In order to improve our understanding of microphysical properties of clouds and precipitation over the Tibetan Plateau (TP), six cloud and precipitation processes with different intensities during the Third Tibetan Plateau Atmospheric Science Experiment (TIPEX-Ⅲ) from 3 July to 25 July 2014 in Naqu region of the TP are investigated by using the high-resolution mesoscale Weather Research and Forecasting (WRF) model. The results show unique properties of summertime clouds and precipitation processes over the TP. The initiation process of clouds is closely associated with strong solar radiative heating in the daytime, and summertime clouds and precipitation show an obvious diurnal variation. Generally, convective clouds would transform into stratiform clouds with an obvious bright band and often produce strong rainfall in midnight. The maximum cloud top can reach more than 15 km above sea level and the velocity of updraft ranges from 10 to 40 m s-1. The simulations show high amount of supercooled water content primarily located between 0 and -20℃ layer in all the six cases. Ice crystals mainly form above the level of -20℃ and even appear above the level of -40℃ within strong convective clouds. Rainwater mostly appears below the melting layer, indicating that its formation mainly depends on the melting process of precipitable ice particles. Snow and graupel particles have the characteristics of high content and deep vertical distribution, showing that the ice phase process is very active in the development of clouds and precipitation. The conversion and formation of hydrometeors and precipitation over the plateau exhibit obvious characteristics. Surface precipitation is mainly formed by the melting of graupel particles. Although the warm cloud microphysical process has less direct contribution to the formation of surface precipitation, it is important for the formation of supercooled raindrops, which are essential for the formation of graupel embryos through heterogeneous freezing process. The growth of graupel particles mainly relies on the riming process with supercooled cloud water and aggregation of snow particles.     

基于走时的保幅偏移方法

振幅随偏移距变化是描述储层特征的重要方法之一,保幅偏移方法就是使偏移剖面能够反映出振幅随偏移距的变化.本论文中的保幅偏移是以走时为基础,主要的方法是采用走时的双曲线展开法,通过走时的二阶空间导数来确定波前曲率.该方法通过建立在大网格上的走时表来确定插值系数,将大网格插值成为较为精细的网格,这样就节省了数据的存储空间.对于相同的网格密度,通过插值来计算走时表比采用程函方程有限差分法直接计算走时要节省5至6倍的时间.走时的插值系数还可以用来计算几何扩散因子、权函数,不仅提高了成像质量,还大大节省了计算时间.     

基于GML/SVG的WebGIS体系结构设计与实现

随着Internet的飞速发展,WebGIS也进入了蓬勃发展的阶段,而制约WebGIS发展的问题也日益突出。本文针对WebGIS中存在的地理空间数据语义共享和网络带宽日益紧张的问题,引入了GML和SVG,在此基础上提出并论证的基于GML和SVG的WebGIS系统的方案和应用模式,并详析了实现该系统的体系结构和相关技术,最后给出了该系统的应用实例。     

青藏高原东部壳幔速度结构和地幔变形场的研究

在青藏高原东部地球动力学问题中,笔者在文中主要考虑与地壳上地幔速度结构和地幔变形场有关的问题,它涉及当前流行的下地壳流动模型和壳-幔的耦合-解耦模型。在2000年完成的穿过川西高原和四川盆地的深地震测深剖面,揭示了川西高原的地壳结构具有地壳增厚(主要是下地壳增厚)、地壳平均速度低等特点,显示地壳的缩短与增厚的碰撞变形特征。根据川西高原上设置各爆炸点的记录截面图共同呈现PmP(莫霍界面反射波)弱能量的特点,推断在川西高原的下地壳介质具有强衰减(Qp=100～300)的性质,支持存在下地壳流动的模型。青藏高原东部和川滇西部地区的上地幔各向异性(SKS波快波偏振方向和快慢波延迟时间)的初步结果表明,这两个地区的壳-幔变形特征是不同的,尽管它们在地理位置上属于同一个板块碰撞带。在青藏高原内部的壳幔变形属于垂直连贯变形,它以缩短为主,而高原外部的地壳(或岩石圈)则相对于其下方地幔运动。在高原内部和外部之间存在一个重要的地幔变形过渡带。然而,高原内部的垂直连贯变形与高原内部存在大范围下地壳流动的模型不一致。笔者在该地区开展了近两年的宽频带流动地震观测,试图从地震记录中确定过渡带的位置和探讨它的流变性质。文中扼要回顾已经取得的结果,并介绍正在进行的研究。     

1976年龙陵地震区断裂活动性研究

研究了1976年龙陵7．3、7．4级地震震区内的龙陵-瑞丽断裂、怒江断裂和腾冲断裂的第四纪构造环境和断裂活动性,得出腾冲火山断裂带具有新生火山、断裂构造作用,并对龙陵-瑞丽断裂、怒江断裂等的活动性产生影响和改造。提出了这一活动构造带内小型北西-北北西向断裂是龙陵强震发震构造的观点。