刘山岩铜锌矿床成矿地质特征及成矿预测

刘山岩铜锌矿是一座探明资源量面临枯竭的矿山。为寻求新的资源量,探讨该矿区进一步找矿的希望,解决矿山的生存问题,本文通过对刘山岩铜锌矿的地质勘察及开采期间的资料系统整理和研究,对过去的找矿思路进行仔细地分析,提出了刘山岩铜锌矿区深部找矿的具体方向,并对矿区进行了必要的物探工作,对隐伏矿体进行了矿体群的预测。     

绰斯甲水电站野人谷泥石流发育特征分析与防治建议

介绍了野人谷泥石流的发育特征,利用雨洪法进行了定量分析,为在该泥石流沟内布置渣场提出了合理的建议.     

白云岩化作用与碳酸盐岩储层物性

研究资料表明,白云岩化作用对碳酸盐岩储层物性的影响可分为直接影响和间接影响2个方面。直接影响包括白云岩化过程中的溶蚀作用、等摩尔交代、过白云岩化、等体积交代和对渗透率的提高5个方面。间接影响主要是白云岩化之后的溶蚀(多具选择性)和白云岩比同类灰岩抗压实压溶,从而易于保存孔隙;同等条件下比灰岩更易发育断裂、裂缝。对碳酸盐岩储层来讲,原始沉积环境是重要条件,白云岩化作用常常是先决条件,而白云岩化之外的成岩作用改造是关键因素。     

材料状态对干砂小应变特性的影响

利用注能虚拟质量(EIVM)共振柱系统进行了干砂小应变特性试验,研究了有效平均正应力、土样密度、剪应变幅值以及荷载往复次数对剪切模量和阻尼比的影响。试验结果表明,剪切模量随有效平均正应力与土样密度的增加而增加,而阻尼比的变化规律则与之相反,并且有效平均正应力对干砂小应变特性的影响程度比土样密度的影响程度大得多;随着剪应变的增加,剪切模量越来越小,而阻尼比越来越大;荷载往复次数对剪切模量基本没有影响,而对阻尼比有较大影响。     

砂岩型铀矿勘查样品中铀的野外快速测定方法研究

本文研究并建立了适合野外条件下快速测定砂岩型铀矿勘查试样中铀的分析方法———密闭酸溶试样、钒酸铵容量法测定铀。采用密闭增压酸溶样, 可使粒度小于0 25 mm的试样分解完全;小体积容量法提高了测定灵敏度。配合不同浓度的标准溶液可适应不同含量范围铀的测定。方法经标准物质和吐哈工区试样验证, 准确度和精度较高, 且操作简单, 适应性广, 具有实用和推广价值。     

中天山、伊犁及塔里木地块开始参与Rodinia超大陆聚合过程早于新元古代?

长久以来,中国主要陆块被普遍认为比世界其他陆块开始参与罗迪尼亚超大陆聚合的时间较晚,为新元古代早期。为了探讨此问题,我们选择中国中天山、伊犁及塔里木地块作为主要研究对象,系统分析了新元古代早期(1.0～0.8Ga)的构造变形及岩浆特征。新元古代早期构造变形主要表现为拉伸线理近平行于造山带方向,反映了后造山陆内走滑剪切过程。1.0～0.8Ga的岩浆岩皆为较小规模花岗岩,未见基性包体,矿物组合中基本无角闪石,具有高钾钙碱性和过铝质特征,并含有大量捕获老锆石,说明古老基底或重熔地壳的显著参与。岩石源区主要为重熔基性下地壳,在构造背景判别图上基本落在后造山环境。锆石Ti及全岩Zr温度计算结果显示这些岩体的结晶温度普遍偏高,约800℃。结合已有区域地质资料,我们认为:①在新元古代原塔里木陆块(包括早期中天山、伊犁及塔里木地块)已经位于罗迪尼亚超大陆内部,1.0～0.8Ga变形及岩浆记录皆反映了原塔里木陆块与其它陆块碰撞后的构造事件;②由于超大陆聚合后的热毯效应使得新元古代早期花岗岩结晶温度偏高;③中天山、伊犁及现今塔里木地块最初参与罗迪尼亚超大陆汇聚的时间应早于新元古代(1.0Ga)。     

复合加筋排水褥垫加固路基有限元计算

复合加筋排水褥垫是针对沿海缺砂地区开发的,具有水平排水与加筋作用的一项新型专利技术,可取代软基加固中的排水砂垫层。采用二维平面应变Biot固结有限元模型对复合加筋排水褥垫软土路堤进行了数值模拟,结果表明复合加筋排水褥垫可以满足水平排水要求,另外与传统的水平排水砂垫层相比,该技术可降低地基附加正应力和超孔隙水压力,有效抑制路基侧向变形的发展,减小路基沉降与不均匀沉降,提高路基稳定性,加筋效果显著。     

西藏冈底斯带中南部与俯冲有关的早侏罗世花岗闪长岩:锆石U-Pb年代学及地球化学证据

肖打松多花岗闪长岩位于西藏冈底斯花岗岩带中段以南,主要岩石类型有:细中粒黑云母(角闪石)花岗闪长岩、细中粒含斑黑云母(角闪石)花岗闪长岩、细中粒斑状黑云母(角闪石)花岗闪长岩,岩石具钙碱性特征,w(SiO2)=61.58％～72.16％,w(K2O)/w(Na2O) =0.64～1.15,相对富钠,A/CNK=1.25...     

Geochronology of the Dong Tso Ophiolite and the Tectonic Environment

The wedge shaped Dong Tso ophiolitic block is distributed near the transition point from the western to the middle sub-belt of the Bangong-Nujiang suture zone.The ophiolite is characterized by well-developed cumulate rocks that are mainly composed of cumulate and massive gabbros.In the cumulate gabbros,the adcumulate amphiboles are distributed extensively around the plagioclase and residual pyroxene grains; hence,the rocks are named adcumulate amphibole-gabbro.In this study,the formation age of the ophiolite has been estimated to be 166 ± 4 million years （Ma） by the sensitive high-resolution ion microprobe （SHRIMP） Ⅱ U-Pb isotopic analysis of the zircons from the adcumulate amphibole-gabbro; the 40Ar/39Ar plateau age was estimated to be 148.19 ± 1.53 Ma,which should represent the emplacement time of the ophiolite,by isotopic dating of the pure amphibole mineral from the amphibole-schist.Two different suits of volcanic lavas have been recognized in this work.The purple colored pillow basalts have high TiO2 and P2O5 contents,and are rich in light rare earth elements （LREEs）,large-ion lithospheric elements （LILEs） and high-field-strength elements （HFSEs）,the characteristics that are the typical of the oceanic island basalt （OIB）.On the other hand,other massive basaltic andesites of celadon color are poor in MgO; rich in Fe2O3,LREEs,LILEs,and HFSEs; and especially characterized by negative Nb and Ta anomalies,the properties that establish the andesites as continental arc volcanic rocks.It is concluded that hotspots had developed in the old Dong Tso basin,the oceanic basin that had been developing from middle Jurassic （166 Ma） or even before and emplaced northward in late Jurassic （about 148 Ma）.     

Cretaceous Sandbody Characters at Shallow‐Water Lake Delta Front and the Sedimentary Dynamic Process Analysis in Songliao Basin,China

Based on the abundant information from drilling, cores, and logging, the influence of topography, size of rivers and lakes, climate changes and the lake level’s fluctuation on the sandbodies at shallow-water delta front are systematically summarized and the sedimentary dynamic processes are analyzed. The interwell communication among the sandbodies and their planar distribution revealed from the hydrodynamic features of the development wells are integrated during the analysis. The fundamental requirements for the development of the shallow-water delta included flat topography and uniform subsiding rate. The delta plain was connected smoothly with the wide delta front and predelta, without the three-fold structure of topset, foreset, and bottomset as defined in the Gilbert Delta Model. Because of the weak fluvial effect and the lake energy is strong, the small and scattered shallow-water delta is destroyed by the scouring-backwashing, coastal current, and lake wave, resulting in the coastal sheet deposition. As the fluvial effect became stronger and the lake energy became weaker, the shape of the shallow-water deltas transferred from sheets to lumps and then branches.