The measurement and extraction of the <nu>6 atmospheric emission band of CFC-12 from interfering emission features

Ground-based thermal emission measurements of the zenith sky have been made at Peterborough, Ontario since January 1993. In this paper, the measurement of the ₆ band of atmospheric CFC-12, an important greenhouse gas, is presented for a cold, clear day in January 1994. A spectrum of the non-CFC-12 emission features has been simulated using the FASCD3P radiation code and measured radiosonde profiles of temperature, pressure and humidity. This has enabled a satisfactory subtraction of the interfering emission features from the CFC-12 emission spectrum. A comparison of the observed and simulated ₆-bands of CFC-12 shows good agreement at all frequencies of emission. From these spectra the total downward greenhouse radiative flux from the CFC-12 ₆ emission based for a very cold day has been estimated to be 0.27 W m⁻²±10%.     

Comparison between the Shkuratov and Hapke Scattering Theories for Solid Planetary Surfaces: Application to the Surface Composition of Two Centaurs

This project examines the different approaches which deal with the theory of radiative transfer on atmosphereless bodies. We present the relative merits of two scattering theories based on the equivalent slab model: the extensively used Hapke theory (Hapke 1981, J. Geophys. Res.86, 3039-3054) and the Shkuratov theory (Shkuratov et al. 1999, Icarus141, 132-155). We found that their main difference is the role of the phase function of individual particles of regolith, which is predicted (and generally forward directed) in the case of the Shkuratov model instead of being a free parameter as formulated in the Hapke model. We also emphasize that different assumptions as to the manner in which different constituents are physically mixed in either model have a substantial effect on the synthetic spectra inferred. This leads to a significant extension of the validity of Hapke's or similar practical approaches to areas where these approaches are valid.We used two objects (the Centaurs 5145 Pholus and 8405 Asbolus) as examples. Previous modeling of the spectra of these two bodies with the Hapke approach gave suspect results in terms of the derived grain sizes, which were smaller than the wavelength, violating key assumptions of the model (Cruikshank et al. 1998, Icarus135, 389-407 for Pholus; Barucci et al. 2000, Astron. Astrophys.357, L53-56 for Asbolus). We considered several different types of powdered surfaces to interpret the surface composition of these two Centaurs. The effect of fine-scale contamination of water ice grains by small amounts of carbon and/or tholins is also explored. We can explain the strong red color and the rich near-infrared spectral signatures of Pholus using a five-component surface (contaminated water ice, amorphous carbon, Titan tholin, olivine, and methanol ice) where the grain sizes are consistent with the model assumptions. These components are similar to those inferred by Cruikshank et al. (1998), but we obtain very different grain sizes and relative abundances. For example, we obtain a relative abundance of water ice on the surface of Pholus of about 40% instead of 6% found with the Hapke model. Organic and carbonaceous components change by similar amounts. In the case of Asbolus, a tholin and amorphous carbon areal mixture can reproduce the spectrum, with water remaining at 9% or less. Using the albedo published by Fernandez et al. (2002, Astron. J.123, 1050-1055) which is higher than most workers assume for Centaurs and Kuiper belt objects, a surface composition similar to that of Pholus is found. It appears that model-based uncertainties in relative compositions must be regarded with more attention.     

Optimization of Photospheric Electric Field Estimates for Accurate Retrieval of Total Magnetic Energy Injection

Estimates of the photospheric magnetic, electric, and plasma velocity fields are essential for studying the dynamics of the solar atmosphere, for example through the derivative quantities of Poynting and relative helicity flux and using the fields to obtain the lower boundary condition for data-driven coronal simulations. In this paper we study the performance of a data processing and electric field inversion approach that requires only high-resolution and high-cadence line-of-sight or vector magnetograms, which we obtain from the Helioseismic and Magnetic Imager (HMI) onboard Solar Dynamics Observatory (SDO). The approach does not require any photospheric velocity estimates, and the lacking velocity information is compensated for using ad hoc assumptions. We show that the free parameters of these assumptions can be optimized to reproduce the time evolution of the total magnetic energy injection through the photosphere in NOAA AR 11158, when compared to recent state-of-the-art estimates for this active region. However, we find that the relative magnetic helicity injection is reproduced poorly, reaching at best a modest underestimation. We also discuss the effect of some of the data processing details on the results, including the masking of the noise-dominated pixels and the tracking method of the active region, neither of which has received much attention in the literature so far. In most cases the effect of these details is small, but when the optimization of the free parameters of the ad hoc assumptions is considered, a consistent use of the noise mask is required. The results found in this paper imply that the data processing and electric field inversion approach that uses only the photospheric magnetic field information offers a flexible and straightforward way to obtain photospheric magnetic and electric field estimates suitable for practical applications such as coronal modeling studies.     

A deep Giant Metre-wave Radio Telescope 610-MHz survey of the 1HXMM–Newton/Chandra survey field

We present the results of a deep 610-MHz survey of the 1 ^H XMM–Newton / Chandra survey area with the Giant Metre-wave Radio Telescope. The resulting maps have a resolution of ∼7 arcsec and an rms noise limit of 60 μJy. To a 5σ detection limit of 300 μJy, we detect 223 sources within a survey area of 64 arcmin in diameter. We compute the 610-MHz source counts and compare them to those measured at other radio wavelengths. The well-known flattening of the Euclidean-normalized 1.4-GHz source counts below ∼2 mJy, usually explained by a population of starburst galaxies undergoing luminosity evolution, is seen at 610 MHz. The 610-MHz source counts can be modelled by the same populations that explain the 1.4-GHz source counts, assuming a spectral index of −0.7 for the starburst galaxies and the steep spectrum active galactic nucleus (AGN) population. We find a similar dependence of luminosity evolution on redshift for the starburst galaxies at 610 MHz as is found at 1.4 GHz (i.e.  ' Q '= 2.45^+0.3_−0.4  ).     

An anomalous high-velocity layer at shallow crustal depths in the Narmada zone, India

The Narmada zone in central India is a zone of weakness that separates the region of Vindhyan (Meso-Neoproterozoic) deposition to the north from Gondwana (Permo-Carboniferous–lower Cretaceous) deposits to the south. The reinterpretation of analogue seismic refraction data, acquired during the early 1980s, using 2-D ray-tracing techniques reveals a basement (velocity 5.8–6.0 km s⁻¹ ) topography suggesting that the Narmada zone, bounded by the Narmada North and Narmada South faults is a region of basement uplift. A layer of anomalously high velocity (6.5–6.7 km s⁻¹ ) at depths between 1.5 and 9.0 km appears to be present in the entire region. Within the Narmada zone this layer occurs at shallower depths than outside the Narmada zone. At two places within the Narmada zone this layer is at a depth of about 1.5 km. This layer cannot be considered as the top of the lower crust because in this case it should have produced large positive gravity anomalies at the shallowest parts. Instead, these parts correspond to Bouguer gravity lows. Furthermore, lower crust at such shallow depths has not been reported from any other part of the Indian shield. Therefore, this layer is likely to represent the top of a high-velocity mafic body that has different thicknesses in different places.     

The value of a physically based model versus an empirical approach in the prediction of ephemeral gully erosion for loess-derived soils

A data set on soil losses and controlling factors for 58 ephemeral gullies has been collected in the Belgian loess belt from March 1997 to March 1999. Of the observed ephemeral gullies, 32 developed at the end of winter or in early spring (winter gullies) and 26 ephemeral gullies developed during summer (summer gullies). The assessed data have been used to test the physically based Ephemeral Gully Erosion Model (EGEM) and to compare its performance with the value of simple topographical and morphological indices in the prediction of ephemeral gully erosion.Analysis shows that EGEM is not capable of predicting ephemeral gully cross-sections well. Although conditions for input parameter assessment were ideal, some parameters such as channel erodibility, critical flow shear stress and local rainfall depth showed great uncertainty. Rather than revealing EGEM's inability of predicting ephemeral gully erosion, this analysis stresses the problematic nature of physically based models, since they often require input parameters that are not available or can hardly be obtained.With respect to the value of simple topographical and morphological indices in predicting ephemeral gully erosion, this study shows that for winter gullies and summer gullies, respectively, over 80% and about 75% of the variation in ephemeral gully volume can be explained when ephemeral gully length is known. Moreover, when previously collected data for ephemeral gullies in two Mediterranean study areas and the data for summer gullies formed in the Belgian loess belt are pooled, it appears that one single length (L)–volume (V) relation exists (V=0.048 L^1.29; R²=0.91). These findings imply that predicting ephemeral gully length is a valuable alternative for the prediction of ephemeral gully volume. A simple procedure to predict ephemeral gully length based on topographical thresholds is presented here. Secondly, the empirical length–volume relation can also be used to convert ephemeral gully length data extracted from aerial photos into ephemeral gully volumes.     

Submillimetre imaging of NGC 3079

Submillimetre mapping observations of the active edge-on spiral galaxy NGC 3079 are presented. These maps at 850 and 450 μm were made with the Submillimetre Common User Bolometer Array (SCUBA) at the James Clerk Maxwell Telescope (JCMT).
The source structure at these wavelengths consists of a central unresolved source embedded in diffuse disc emission, similar to that displayed at 1.2 mm. The disc emission is fitted with two optically thin, isothermal dust models which give temperatures of 12 and 31 K, similar to those derived previously by Braine et al. The core component is well described by a single-temperature fit (∼32 K). The combined dust mass from these observations, using the same mass absorption coefficient as Devereux & Young (1990) is 3.5×10⁸ M_⊙, of which ∼90 per cent resides in the cold component of the galactic disc. The effect of the cold dust component detected by SCUBA is thus to reduce the global gas-to-dust mass ratio from ∼1400 found in the above study to 85, very similar to the Galactic level. Calculations using the models of Draine & Lee and/or alternative molecular gas mass estimates yield gas-to-dust mass ratios in the range 60–190.
The data presented here, together with previously published 1.2-mm mapping observations and IRAS data, are inconsistent with detections made with the Infrared Space Observatory ( ISO ). In particular, the latter give an excess of flux at 200 and 180 μm relative to that predicted by our simple model fits (approximately a factor of 2–3).