Rock warming and drying under simulated intertidal conditions,part II: weathering and biological influences on evaporative cooling and near‐surface micro‐climatic conditions as an example of biogeomorphic ecosystem engineering

The way in which rocks and engineering materials heat‐up and dry‐out in the intertidal zone is of relevance to both weathering and ecology. These behaviours can be measured in the laboratory under controlled conditions designed to replicate those occurring in the field. Previous studies have demonstrated differences in thermal behaviours between rock types and through time as a result of soiling in terrestrial environments, but the influence of weathering and colonization on rock behaviours in the intertidal zone has not been previously assessed. We measured the warming and drying of blocks of rock (limestone and granite) and marine concrete during ‘low‐tide’ events simulated in the laboratory, before and after a period of exposure (eight months) on rock platforms in Cornwall, UK. As well as differences between the material types, temperatures of control (unexposed) and field‐exposed blocks differed in the order of 1 to 2 °C. Drying behaviours were also different after field exposure. Differences during the first few hours of exposure to air and heat were attributed to discolouration and albedo effects. Over longer periods of time, changes in the availability of near‐surface pore water as a result of micro‐scale bioerosion of limestone and the development of bio‐chemical crusts on marine concrete [observed using scanning electron microscopy (SEM)] are suggested as mechanisms enhancing and reducing, respectively, the efficiency of evaporative cooling. The retention of moisture by epilithic biofilms may also influence thermal and drying behaviours of granite. These observations represent one of the first examples of cross‐scalar biogeomorphic linkages in the intertidal zone. The significance of the results for the subsequent efficiency of weathering, and near‐surface micro‐climatic conditions experienced by colonizing organisms is discussed. The involvement of microorganisms in the creation of more (or less) ecologically stressful conditions through the alteration of substratum geomorphic properties and behaviours is suggested as an example of ‘biogeomorphic ecosystem engineering’. Copyright © 2011 John Wiley & Sons, Ltd.     

非均质地基中平面应变隧道开挖面稳定上限分析

非均质是软黏土地基中比较普遍的现象,而目前隧道开挖面稳定研究中比较成熟的理论主要是针对均质土体。因此,从塑性极限分析上限法的基本原理出发,采用平面应变隧道刚体平动破坏模式(多块体上限法),考虑软黏土地基的非均质性,推导了平面应变隧道极限支护压力关于隧道埋深、土体重度及土体强度的上限公式。通过与其他方法的比较分析,证明了极限分析方法在隧道开挖面稳定性方面的可行性;利用该方法的计算结果详细探讨了隧道开挖面稳定的影响因素;而且由计算结果可知,地基土的非均质性在影响隧道开挖面极限支护压力的同时,也影响着隧道开挖破坏面的位置和形状,为工程实践提供重要的理论依据。     

Sur quelques concentrations plombo-zinciferes du devonien inferieur du massif schisteux rhenan

Zusammenfassung The Lower Devonian of the Rhine Schist Massif is characterized by a fine detrital sedimentation which reflects a coastal plain environment located between the Old Red Sandstone continent in the N and the marine Bohemian Facies in the SE. Mineralisations are located within these coastal-plain sediments, especially in fractured horizons topped by pelitic and floored by sandy sediments of Sieg Emsian age. The mineralised localities occur in three zones: the districts of Bensberg, Eitorf and Mayen. The Lüderich locality (Bensberg) is the most important having approximately one million tons of Zn and Pb metal. It is localised within a zone having marked sedimentary characteristics since the Siegenian. Mineralisation occurs as penecontemporaneous lenses, fracture fillings etc, formed at abnormal contacts between lithological units having different competance during Siegenian and Lower Emsian deformation. However, locally there is lateral transition between the upper units of the sandy channel series and the lower units of the pelitic swamp facies. Vertical extension of mineralisations is strictly limited to the tectonic contact zone between the Odenspiel Sandstone and the Bensberg pelites. Study of mineralisations at various levels (mapping, morphology, structure, paragenetic and geochemical) leads to the formulation of a genetic model requiring complex fracturation at the contact between contrasting lithologies and preferential drainage through these fractured zones; metals are trapped on the sandstone floor, the pelitic roof trapping the vadose hydrothermal solutions. These basic controls seem to apply throughout the Bensberg, Eitorf and Mayen districts. On a more regional scale the age variations of the gangue sediments reflects a lateral displacement of red/grey facies limits due to coastal evolution. Thus one may demonstrate a type of mineral occurrence whose model may be that of epigenetic reconcentration within fractures affecting syngenetic geochemical anomalies.Zusammenfassung Das Unterdevon des Rheinischen Schiefergebirges wird durch eine feinkörnige detritische Sedimentation gekennzeichnet. Die Verteilung dieser detritischen Sedimente widerspiegelt eine flache Küstenlandschaft zwischen dem Kontinent des Unterrotliegenden im Norden und des Meeres mit der Böhmischen Fazies im Südosten. In diesen Schichten befinden sich gangförmige Vererzungen, die in Bruchzonen auftreten, die ein pelitisches Hangendes und ein sandsteinreiches Liegendes vom Siegen-Ems Alter haben. Die Lagerstätten kommen in drei Bezirken vor: Der Bensberger Bezirk, der Bezirk Eitorf und der Bezirk Mayen. Die Lagerstätte Lüderich (Bensberger Revier) ist die größte (ungefähr eine Million Tonnen Metall Zink+Blei). Sie befindet sich in einer Zone, in der schon in der Siegen-Stufe bemerkenswerte sedimentäre Strukturen auftreten. Die Vererzung tritt als penekonkordante Linsen, Gänge, Stockwerke in tektonischen Kontaktzonen auf. Diese Kontaktzonen befinden sich zwischen 2 verschiedenen sedimentären Einheiten, deren Gesteinseigenschaften sehr verschieden sind. Es handelt sich um Pelite mit Sandstein-Einschaltungen einerseits, die zur unteren Emsstufe gehören sollen und um fluviatile Sandsteine andererseits, die zur oberen Siegenstufe gehören sollen. Lokal ist ein lateraler Übergang durch Faziesänderung von den oberen Sandsteinen in die unteren Pelitschichten jedoch nicht unmöglich. Die Sandsteine vertreten einen fluviatilen Sedimentationsbereich, die Pelite einen sumpfigen Sedimentationsbereich. Die Vererzung (mit einer vertikalen Ausdehnung ungefähr von 300 m) tritt nur im Bereich der Kontaktzone zwischen den Odenspieler Sandsteinen und den Peliten der Unteren Bensberger Schichten auf. Die Resultate der Kartographie, der morphologischen Studie der Erzkörper, der Struktur und der Paragenese führen zu einem genetischen Modell. Dabei spielt die Anwesenheit einer Bruchstruktur an der Grenze zwischen 2 Bereichen mit verschiedenen lithologischen Eigenschaften eine Hauptrolle für die Konzentration der im Hangenden fein verteilten Metalle. Die hydrothermalen Lösungen kommen demnach nicht von der Teufe, sondern aus dem Nebengestein. Im ganzen Bensberger Erzrevier wie in der Gegend von Eitorf und in der Gegend von Mayen finden wir dieselben Leitfäden für die Vererzung in den Lagerstätten und Vorkommen. Beobachtet man die ganze Provinz, dann merkt man, daß die Altersverschiedenheiten in den Nebengesteinen der verschiedenen Lagerstätten eine geographische Wanderung der Faziesgrenze zwischen rot und grau in dieser küstennahen Ebene Widerspiegeln. Die verschiedenen Vorkommen und Lagerstätten treten immer in unmittelbarer Nähe dieser Grenze auf. Die Eigenschaften dieser Lagerstätten weisen auf eine Bildung durch eine epigenetische Umlagerung in eine gangförmige Bruchstruktur hin.     

A New Approach for Scientific Data Dissemination in Developing Countries: A Case of Indonesia

This short paper is a progress report on our experiences in Indonesia of collecting, integrating and disseminating both global and local scientific data across the country through the web. Our recent efforts are concentrated on improving local public access to global scientific data, and encouraging local scientific data to be more accessible for global communities. We have maintained a well-connected infrastructure and web-based information management systems to realize these objectives. This paper is especially focused on introducing the ARSIP system for mirroring global data and sharing local scientific data, and the newly developed Indonesian Scientific Index for integrating local scientific data through an automated intelligent indexing system.     

Dunes on Titan observed by Cassini Radar

Thousands of longitudinal dunes have recently been discovered by the Titan Radar Mapper on the surface of Titan. These are found mainly within ±30° of the equator in optically-, near-infrared-, and radar-dark regions, indicating a strong proportion of organics, and cover well over 5% of Titan's surface. Their longitudinal duneform, interactions with topography, and correlation with other aeolian forms indicate a single, dominant wind direction aligned with the dune axis plus lesser, off-axis or seasonally alternating winds. Global compilations of dune orientations reveal the mean wind direction is dominantly eastwards, with regional and local variations where winds are diverted around topographically high features, such as mountain blocks or broad landforms. Global winds may carry sediments from high latitude regions to equatorial regions, where relatively drier conditions prevail, and the particles are reworked into dunes, perhaps on timescales of thousands to tens of thousands of years. On Titan, adequate sediment supply, sufficient wind, and the absence of sediment carriage and trapping by fluids are the dominant factors in the presence of dunes.     

Solar rotation, 1966–1978

Photospheric and chromospheric spectroscopic Doppler rotation rates for the full solar disk are analyzed for the period July, 1966 to July, 1978. An approximately linear secular increase of the equatorial rate of 3.7% for these 12 years is found (in confirmation of Howard, 1976). The high latitude rates above 65 ° appear to vary with a peak-to-peak amplitude of 8%, or more, phased to the sunspot cycle such that the most rapid rotation occurs at, or following, solar maximum. The chromosphere, as indicated by H, has continued to rotate on the average 3% faster than the photosphere agreeing with past observations. Sources of error are discussed and evaluated.Operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.     

Validation of an annual cycle simulation with a T42-L20 GCM

An annual cycle of an atmospheric general circulation model (AGCM) is presented. The winter and summer zonal averages of the atmospheric fields are compared with an observed climatology. The main features of the observed seasonal means are well reproduced by the model. One of the main discrepancies is that the simulated atmosphere is too cold, particularly in its upper part. Some other discrepancies might be explained by the interannual variability. The AGCM surface fluxes are directly compared to climatological estimates. On the other hand, the calculation of meridional heat transport by the ocean, inferred from the simulated energy budget, can be compared to transport induced from climatologies. The main result of this double comparison is that AGCM fluxes generally are within the range of climatological estimates. The main deficiency of the model is poor partitioning between solar and non-solar heat fluxes in the tropical belt. The meridional heat transport also reveals a significant energy-loss by the Northern Hemisphere ocean north of 45° N. The possible implications of model surface flux deficiencies on coupling with an oceanic model are discussed.This paper was presented at the International Conference on Modelling of Global Climate Change and Variability, held in Hamburg 11–15 September 1989 under the auspices of the Meteorological Institute of the University of Hamburg and the Max Planck Institute for Meteorology. Guest Editor for these papers is Dr. L. Dümenil