Assessing soil erosion in Mediterranean karst landscapes of Lebanon using remote sensing and GIS

Maps showing the potential for soil erosion at 1:100,000 scale are produced in a study area within Lebanon that can be used for evaluating erosion of Mediterranean karstic terrain with two different sets of impact factors built into an erosion model. The first set of factors is: soil erodibility, morphology, land cover/use and rainfall erosivity. The second is obtained by the first adding a fifth factor, rock infiltration. High infiltration can reflect high recharge, therefore decreasing the potential of surface runoff and hence the quantity of transported materials. Infiltration is derived as a function of lithology, lineament density, karstification and drainage density, all of which can be easily extracted from satellite imagery. The influence of these factors is assessed by a weight/rate approach sharing similarities between quantitative and qualitative methods and depending on pair-wise comparison matrix.The main outcome was the production of factorial maps and erosion susceptibility maps (scale 1:100,000). Spatial and attribute comparison of erosion maps indicates that the model that includes a measure of rock infiltration better represents erosion potential. Field investigation of rills and gullies shows 87.5% precision of the model with rock infiltration. This is 17.5% greater than the precision of the model without rock infiltration. These results indicate the necessity and importance of integrating information on infiltration of rock outcrops to assess soil erosion in Mediterranean karst landscapes.     

Kinetics of Cd sorption, desorption and fixation by calcite: A long-term radiotracer study

Time-dependent sorption and desorption of Cd on calcite was studied over 210 days utilizing ¹⁰⁹Cd as a tracer to distinguish between ‘labile’ and ‘non-labile’ forms of sorbed Cd. Stabilizing the calcite suspensions for 12 months under atmospheric P_CO2 and controlled temperature was necessary to reliably follow Cd dynamics following initial sorption. Results revealed time-dependant Cd sorption and marked desorption hysteresis by calcite under environmentally relevant conditions. Data obtained were fitted to a first-order kinetic model and a concentric shell diffusion model. Both models described the progressive transfer of Cd²⁺ to a less reactive form within calcite and subsequent desorption of Cd subject to different initial contact times. The kinetic model provided a better fit to the combined sorption and desorption data (R² = 0.992). It differentiates between two ‘pools’ of sorbed Cd²⁺ on calcite, ‘labile’ and ‘non-labile’, in which labile sorbed Cd is in immediate equilibrium with the free Cd²⁺ ion activity in solution whereas non-labile Cd is kinetically restricted. For the diffusion model (R² = 0.959), the rate constants describing Cd dynamics in calcite produced a half-life for Cd desorption of ∼175 d, for release to a ‘zero-sink’ solution. Results from this study allow comment on the likely mechanisms occurring at the calcite surface following long-term Cd sorption.     

Microbial mass-dependent fractionation of chromium isotopes

Mass-dependent fractionation of Cr isotopes occurs during dissimilatory Cr(VI) reduction by Shewanella oneidensis strain MR-1. Cells suspended in a simple buffer solution, with various concentrations of lactate or formate added as electron donor, reduced 5 or 10 μM Cr(VI) to Cr(III) over days to weeks. In all nine batch experiments, ⁵³Cr/⁵²Cr ratios of the unreacted Cr(VI) increased as reduction proceeded. In eight experiments covering a range of added donor concentrations up to 100 μM, isotopic fractionation factors were nearly invariant, ranging from 1.0040 to 1.0045, with a mean value somewhat larger than that previously reported for abiotic Cr(VI) reduction (1.0034). One experiment containing much greater donor concentration (10 mM lactate) reduced Cr(VI) much faster and exhibited a lesser fractionation factor (1.0018). These results indicate that ⁵³Cr/⁵²Cr measurements should be effective as indicators of Cr(VI) reduction, either bacterial or abiotic. However, variability in the fractionation factor is poorly constrained and should be studied for a variety of microbial and abiotic reduction pathways.     

A quantitative interpretation of recent experimental results on stable carbon isotope fractionation by aerobic CH4-oxidizing bacteria

A quantitative model of recent laboratory experiments on carbon isotope fractionation by methane-oxidizing bacteria is proposed. The simulated experimental apparatus consists of a bacterial culture with a constant liquid volume, a gas headspace and a methane bubbling mechanism. The relative effects of bacterial growth and transport phenomena that do not depend on cell density are clarified. In all calculations, gas-liquid mass transfer is defined by unconstrained model parameters. Limited mass transfer from the culture into the headspace, rather than the incomplete dissolution of substrate-rich bubbles, seems to have caused an apparent decrease in the measured carbon isotope fractionation. The experimenters attributed this fractionation shift to a growing imbalance among kinetic rates as methane consumption by bacteria increases. Model predictions support this interpretation but also show that changes in carbon isotope fractionation in the course of the experiments cannot be unambiguously correlated with bacterial cell density unless gas-liquid mass transfer parameters are calibrated. Simulations of other laboratory experiments indicate that a reported change in carbon isotope fractionation could, in part at least, be the result of experimental conditions rather than the emergence of a different methane oxidation pathway postulated by the experimenters. A careful evaluation of mass transfer from the liquid culture into the gas headspace is warranted in this type of experiments since isotope fractionation factors are likely to be used in a wide variety of environmental contexts.     

Calcite precipitation instability under laminar, open-channel flow

We present a 2D numerical model for the growth of calcite from supersaturated aqueous solutions under laminar, open-channel flow conditions. The model couples solution chemistry, precipitation at solution/calcite interfaces, hydrodynamics, diffusion and degassing. The model output is compared with experimental results obtained using an oversaturated calcite solution produced by mixing CaCl₂ and Na₂CO₃. The precipitation rate is observed to increase when the supersaturated solution flows over an obstruction, leading to a growth instability that causes the formation of terraces. At relatively high flow rates, the most important mechanism for this behaviour seems to be hydrodynamic advection of dissolved species either towards or away from the calcite surface, depending on location relative to the obstruction, which deforms the concentration gradients. At lower flow rates, steepening of diffusion gradients around protrusions becomes important. Enhanced degassing over the obstruction due to shallowing and pressure drop is not important on small scales. Diffusion controlled transport close to the calcite surface can lead to a fingering-type growth instability, which generates porous textures. Our results are consistent with existing diffusive boundary layer theory, but for flow over non-smooth surfaces, simple calcite precipitation models that include empirical correlations between fluid flow rate and calcite precipitation rate are inaccurate.     

Origin of the Oceanic Lithosphere

In a global examination of mid-ocean ridge basalt (MORB) glasscompositions, we find that Na₈–Fe₈–depth variationsdo not support modeling of MORBs as aggregates of melt compositionsgenerated over a large range of temperature and pressure. However,the Na₈–Fe₈ variations are consistent with the compositionalsystematics of solidus melts in the plagioclase–spinellherzolite transition in the CaO–MgO–Al₂O₃–SiO₂–Na₂O–FeO(CMASNF) system. For natural compositions, the P–T rangefor melt extraction is estimated to be 1·2–1·5GPa and 1250–1280°C. This P–T range is a closematch with the maximum P–T conditions for explosive pressure-releasevaporization of carbonate-bearing melts. It is proposed thatfracturing of the lithosphere induces explosive formation andescape of CO₂ vapor. This provides the vehicle for extractionof MORBs at a relatively uniform T and P. The upper portionof the CO₂-bearing and slightly melted seismic low-velocityzone flows toward the ridge, rises at the ridge axis to lower-lithospheredepths, melts much more extensively during this rise, and releasesMORB melts to the surface driven by explosively escaping CO₂vapor. The residue and overlying crust produced by this meltingthen migrate away from the ridge axis as new oceanic lithosphere.The entire process of oceanic lithosphere creation involvesonly the upper 140 km. When lithospheric stresses shift fractureformation to other localities, escape of CO₂ ceases, the vehiclefor transporting melt to the surface disappears, and ridgesdie. Inverse correlations of Na₈ vs Fe₈ for MORB glasses areexplained by mantle heterogeneity, and positive variations superimposedon the inverse variations are consistent with progressive extractionof melts from short, ascending melting columns. The uniformlylow temperatures of MORB extraction are not consistent withthe existence of hot plumes on or close to ocean ridges. Inthis modeling, the southern Atlantic mantle from Bouvet to about26°N is relatively homogeneous, whereas the Atlantic mantlenorth of about 26°N shows significant long-range heterogeneity.The mantle between the Charlie Gibbs and Jan Mayen fracturezones is strongly enriched in FeO/MgO, perhaps by a trappedfragment of basaltic crust. Iceland is explained as the productof this enrichment, not a hot plume. The East Pacific Rise,Galapagos Ridge, Gorda Ridge, and Juan de Fuca Ridge samplemantle that is heterogeneous over short distances. The mantlebeneath the Red Sea is enriched in FeO/MgO relative to the mantlebeneath the northern Indian Ocean.     

Late Precambrian rifting in the geological history of the western slope of the South Urals

The rift-related geodynamic setting of the Late Precambrian geological evolution on the western slope of the South Urals is reconstructed on the basis of localization of lithotectonic complexes of this age, their formation conditions, and the geochemistry of rocks. The Early Riphean stage comprises accumulation of coarse-clastic rocks intercalating with alkaline volcanic rocks of the Navysh Complex, which is a constituent of the Ai Formation, and emplacement of doleritic and picritic intrusions of the Shuida Complex and melanocratic dolerite and gabbrodolerite of the Yusha Complex. The Middle Riphean stage is characterized by wide-spread coarse-clastic terrigenous rocks of the Mashak Formation that intercalate with volcanic rocks of the bimodal basalt-rhyolite association, the Berdyaush pluton of rapakivi granite, the Kusa-Kopan layered intrusive complex, the Lapyshta Complex of dolerites and picrites, and numerous occurrences of gabbrodolerites. The terrigenous rocks of the Vendian stage include conglomerate, gravelstone, and sandstone of the Asha Group, while igneous rocks comprise alkaline volcanics of the Arsha Complex, alkali gabbroids of the Miseli Complex, and melanocratic syenite of the Avashla Complex. The geological evolution of the region is distinguished by local (failed or aborted) rifting. The occurrence of lithotectonic complexes is controlled by dynamic conditions of rifting. A certain inheritance in the evolution may be traced for the Early and Middle Riphean and partly for the Late Riphean and Vendian.     

Large and giant hydrocarbon accumulations in the transitional continent-ocean zone

The petroleum resource potential is considered for the Atlantic, West Pacific, and East Pacific types of deepwater continental margins. The most considerable energy resources are concentrated at the Atlantic-type passive margins in the zone transitional to the ocean. The less studied continental slope of backarc seas of the generally active margins of the West Pacific type is currently not so rich in discoveries as the Atlantic-type margin, but is not devoid of certain expectations. In some of their parameters, the margins bounded by continental slopes may be regarded as analogs of classical passive margins. At the margins of the East Pacific type, the petroleum potential is solely confined to transform segments. In the shelf-continental-slope basins of the rift and pull-apart nature, petroleum fields occur largely in the upper fan complex, and to a lesser extent in the lower graben (rift) complex. In light of world experience, the shelf-continental-slope basins of the Arctic and Pacific margins of Russia are evaluated as highly promising.     

Biofacies analysis of Upper Cretaceous deposits in the Ust-Yenisei region: Implications of palynomorphs

The results of palynomorph biofacies analysis in the Upper Cretaceous deposits of the Ust-Yenisei region are presented. The established facies confinement and indicative features of separate palynomorph groups are used, along with identified dinocyst morphotypes and taxa, in paleogeographic reconstructions. Seven palynomorph associations characterizing continental, coastal-marine, shallow-and deep-water facies are distinguished based on quantitative proportions between morphological groupings and individual taxa. As boundaries between distinguishable biostratigraphic and facies subdivisions do not coincide, dinocysts were likely insignificantly dependent in distribution on facies in the West Siberian epicontinental basin at least. On the other hand, distribution trends of particular dinocyst morphotypes and other microphytofossils are correlative with transgressive-regressive cycles and can be used for reconstruction of paleoenvironments.