Particulate flux in the water column overlying Santa Monica Basin

Fluxes of particulate carbon, nitrogen, phytoplankton pigments, biogenic silica and dry mass were measured using free-floating and moored sediment trap arrays in the Santa Monica Basin during the period from October 1985 to August 1990 as part of the California Basin Study (CaBS) Program. In field testing for potential sources of sediment trap biases, we found little significant or consistent difference in rate estimates between short-term drifting traps and long-term moored traps, between preserved and unpreserved traps in short-term experiments, between different preservatives (mercury or formalin) in long-term experiments, between different designs of small cylindrical traps, and between deep-moored cylindrical traps and large conical traps. We did, however, find that sediment trap samples collected and analyzed on 0.45 μm silver filters gave estimates of carbon and nitrogen fluxes about 25% higher than samples collected on GF/F glass-fiber filters. Concurrent trap deployments at two stations 18km apart revealed low mesoscale variability in flux estimates. Seasonal patterns in carbon and nitrogen flux were not evident in our data, but strong seasonality, with spring maxima and summer minima, were observed for fluxes of phaeopigments and biogenic silica out of the euphotic zone.Time-averaged rates of particulate flux for long-term trap deployments from January to August 1990, were 121, 18.8, 1.5, 67 and 633mg m⁻²d⁻¹ at 110–135m for carbon, nitrogen, phaeopigment, biogenic silica and mass, respectively. Flux estimates to the basin floor (835–860m) were 50, 6.5, 0.64, 41.6 and 575mg m⁻²d⁻¹ for the same parameters. The former estimates are constrained by and in good agreement with independent assessments of new production from nitrate uptake in the euphotic zone. The latter agree with rates previously inferred from the sedimentary record using ²¹⁰Pb as a tracer. In addition, the difference in carbon estimates in the water column between the euphotic zone and the basin floor is consistent with the requirements for bacterial growth and metabolism at intermediate depths as measured by the thymidine method.     

Threshold of motion of coarse-grained sediment under waves in shallow water

This paper considers the threshold of motion of sediment in shallow coastal waters under breaking and non-breaking waves. A simple model, representing conditions at the fluid/sediment interface, is developed. The representation of a breaking wave is based on bore theory, and the shear stress at the bed is based on the friction formula of O'Connor and Yoo. A threshold formula is presented based on the use of energy dissipation. The threshold data is also related to the Shields threshold criterion.     

Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.     

Implications from a field study regarding the relationship between polycyclic aromatic hydrocarbons and glutathione S-transferase activity in mussels

An aluminium smelter on the west coast of Scotland discharges an aqueous effluent containing polycyclic aromatic hydrocarbons (PAHs) at the head of Loch Leven. The loch also supports two mussel (Mytilus edulis) farms. Data are presented on burdens of PAHs in the soft tissues of mussels and the effect of these contaminants on glutathione S-transferase (GST) activity in mussel hepatopancreas. GST activity is shown to be correlated with total PAH burden and also with the concentrations of certain individual PAHs. These field data show that high molecular weight PAHs are closely correlated to GST activity, whereas low molecular weight PAHs are not. This suggests that 5- and 6-ring PAHs have a more pronounced role than 2- to 4-ring compounds in inducing GST activity in mussels from Loch Leven. It is proposed that it may be more appropriate to link GST activity with 5- and 6-ring compounds only, rather than with the total PAH burden.     

Seasonally Hypersaline Estuaries in Mediterranean-climate Regions

Data collected in three Californian estuaries indicate that hypersaline conditions exist during the dry summers typical of a Mediterranean climate. The generalised seasonal and longitudinal hydrographic structures are described and explained. It is argued that this seasonal hypersalinity is common and that it represents a major class of estuaries. The observed accumulation of salt indicates surprisingly long residence times in small basins which have free exchange with the ocean. This semi-isolation of the inner basin leads to a large build-up or severe depletion of nutrients, pollutants and plankton in these systems. Of concern are the trends to increase pollutant loading in the same systems that are experiencing an increase in residence times owing to freshwater extraction in the watershed.     

Dynamics of a moored barge under regular and random waves

Developments in the study of wave forces and construction techniques in deep water by the offshore oil industry have increased the use of marine terminals at deep water locations. A thorough understanding of moored ship dynamics when subjected to waves, wind and current combined with the use of flexible mooring lines would help to design berthing terminals for exposed areas. In this paper, the three dimensional problem of wave interactions with a barge moored to a single point is dealt with, based on the finite element method. The effect of flexibility of the mooring line and the point of mooring on the response of the barge as well as the mooring line tension is investigated. The paper compares the numerical results with model tests carried out on a barge moored to a fixed support under regular and random waves in head sea. The effect of stiffness of the mooring line on the barge response for different mooring points is discussed, which would be useful for the designers. The effect of viscous damping is also considered. The analytical results are in good agreement with the experimental results in both regular and random waves.     

A unified, polynomial approach for the approximate solution of thermoelastic problems in rectangular plates

The present paper, of a tutorial nature, solves two different thermoelastic problems using a unified approach: (a) thermoelastic stresses and deflections in thin, rectangular plates with edges elastically restrained against rotation when small-deflection theory is used and stress resultants in the middle plane of the plates are neglected; and (b) thermoelastic plane stress situations in rectangular plates with stress-free edges subjected to a two-dimensional temperature distribution.The first problem is attacked using polynomial coordinate functions which identically satisfy the governing boundary conditions, and the Ritz method is used to determine the plate response. When the flexibility coefficients approach zero (clamped edge conditions) the calculated results practically coincide with the exact solution for the test case treated in this paper. On the other hand this degenerate solution turns out to be a very convenient approximation for obtaining a solution to Airy's problem described in the second place and which is also solved in a straightforward manner using a variational approach.     

Sensitivity to stress of the estuarine bivalve Macoma balthica from areas between the Netherlands and its southern limits (Gironde)

Variation in the sensitivity to stress of Macoma balthica was measured in several French and Dutch estuaries. For adult and juvenile Macoma balthica exposed to copper under conditions of starvation, differences in mortality rate, condition, glycogen, burrowing rate and copper content were assessed. No significant differences were observed between adults and juveniles; the influence of treatment and origin was always evident. Animals from the most southern estuaries, Loire and Gironde, near to the species's southern limit of distribution, showed, in the field, the strongest deviations for the ecophysiological traits measured, and were in the experiments the most sensitive to stress.     

Geometrical aspects of a sonar-based navigation system for underwater vehicles

A novel self-contained navigation system has been devised for underwater vehicles operating in and around offshore installations. This system matches data from a sector-scanning sonar device to a computer model of the installation. The paper begins by highlighting the existing approaches to subsea navigation before outlining the main features of the proposed system. It then concentrates on a key component of this system which is a method for calculating the position and heading of an underwater vehicle navigating in the vincinity of tubular steel structures. An iterative solution method is presented which incorporates six degree of freedom vehicle motions and this is verified in a series of laboratory experiments with various arrangements of structural members and using a commercial sonar device. The key features, applications and performance of this method are discussed. The main conclusion is that the proposed method for calculating the position and heading of an underwater vehicle contributes towards achieving an accurate and reliable subsea navigation capability.