多维体视方法论及其在地球科学研究中的意义

本文阐述”多维体视方法论”,主张立体透视与动态、多维地看问题;它起源于医学CT(计算机层析学)透视成像、核磁共振(MRI)等体视学方法研究疾病的生理解剖结构、病理特征、监测人体有关器官的各种变化,是行之有效的方法;已成功地应用于检测工业器械、航天器及地下结构等物体的内部结构,从而发展和演绎出来的认识论方法。在医学领域将CT、MRI所得二维信息和断面图像、对病灶区引入“体显示”和“面显示”等可视化技术,将能充分反映不同疾病的病理、药理特征;在航天、地学等领域同样应用着CT多维“可视化技术”。本文试图发扬综合预测的学术思想,将医学临床应用CT、核磁共振、体视学方法结合研究其他制约因素指标,从而区分出疾病的原发、继发分期,导致绝症的进程和前兆,概括为“多维体视预测方法”;也适用于地震孕育、强震发生与火山喷发预测的研究。     

Hamilton Harbour, Ontario: 8300 years of limnological and environmental change inferred from microfossil and isotopic analyses

Limnological changes in Hamilton Harbour, Lake Ontario, over the Holocene were investigated by using proxy evidence from diatoms and other siliceous microfossils in a radiometrically dated sediment core (HH26comp), together with environmental data derived from sediment pollen and oxygen and carbon isotope analyses. The evidence demonstrates that the site of Hamilton Harbour has changed over the past 8300 y from a shallow, separate waterbody, to a deep embayment of Lake Ontario. The earliest evidence, from 8300 BP to 7000 BP, is of a mesotrophic pond of moderate alkalinity, warmer than present, and probably with an extensive marginal wetland. An initial transitory connection with the rising water level of Lake Ontario was established at c. 7000 BP, possibly via a deep outlet channel. This connection is 2000 y earlier then previously estimated. Permanent confluence with Lake Ontario was established at c. 6200 BP, causing a decline in inferred trophic level and water temperatures. Microfossils reach a minimum at 4400 BP coincident with the Nipissing Flood. Decreased mixing of Lake Ontario water from about 4000 BP following the Nipissing Flood highstand is evidenced in isotopic and diatom data. Three isolated shifts in the diatom spectrum at c. 4900 BP, 4500 BP, and 3500 BP may be associated with extreme turbidity or storm deposit events. Between 3200 BP and 280 BP, Hamilton Harbour was evidently a moderately alkaline embayment of Lake Ontario, oligotrophic to mesotrophic, and relatively cooler than present. The final 280 y sedimentary record reveals the magnitude of anthropogenically induced changes to the harbour, including eutrophication and organic pollution.     

An ephemeral turbidity maximum generated by resuspension of organic-rich matter in a macrotidal estuary, S.W. Wales

An ephemeral estuarine turbidity maximum (ETM) occurs at high water in the macrotidal Taf estuary (SW Wales, United Kingdom). A new mechanism of ETM formation, due to resuspension and advection of material by flood tidal currents, is observed that differs from classical mechanisms of gravitational circulation and tidal pumping. The flood tide advances across intertidal sand flats in the main body of the estuary, progressively entraining material from the rippled sands. Resuspension creates, a turbid front that has suspended sediment concentrations (SSC) of about 4,000 mg I⁻¹ by the time it reaches its landward limit which is also the landward limit of salt penetration. This turbid body constitutes the ETM. Deposition occurs at high slack water but the ETM retains SSC values up to 800 mg I⁻¹, 1–2 orders of magnitude greater than ambient SSC values in the river and estuarine waters on either side. The ETM retreats down the estuary during the ebb; some material is deposited thinly across emergent intertidal flats and some is flushed out of the estuary. A new ETM is generated by the next flood tide. Both location and SSC of the ETM scale on Q/R³ where Q is tidal range and R is river discharge. The greatest expression of the ETM occurs when a spring tide coincides with low river discharge. It does not form during high river discharge conditions and is poorly developed on neap tides. Particles in the ETM have effective densities (120–160 kg m⁻³) that are 3–4 times less than those in the main part of the estuary at high water. High chlorophyll concentrations in the ETM suggest that flocs probably originate from biological production in the estuary, including production on the intertidal sand flats.     

Magnetic stratigraphy observed in ferromanganese crust

Summary. A sample of ferromanganese crust deposit (SCHW-1D) was cut into two sets of 1 mm slices for palaeomagnetic study. Alternating field and thermal demagnetization, and isothermal remanent magnetization analyses were performed on each thin slice. The results reveal the presence of a stable magnetism and both normal and reversed polarity intervals in the specimens. The observed polarity intervals cannot be confidently correlated with the geomagnetic polarity time-scale of the last 10 Myr due to the polarity overlap inherent in the sampling technique. But the results confirm the slow accretion rate of ferromanganese deposit determined by ¹⁰Be method and suggest potential use of ferromanganese deposits in palaeomagnetic and tectonic studies.     

Estuarine Habitat and Demographic Factors Affect Juvenile Chinook (<Emphasis Type="Italic">Oncorhynchus tshawytscha</Emphasis>) Growth Variability in a Large Freshwater Tidal Estuary

Estuarine rearing has been shown to enhance within watershed biocomplexity and support growth and survival for juvenile salmon (Oncorhynchus sp.). However, less is known about how growth varies across different types of wetland habitats and what explains this variability in growth. We focused on the estuarine habitat use of Columbia River Chinook salmon (Oncorhynchus tshawytscha), which are listed under the Endangered Species Act. We employed a generalized linear model (GLM) to test three hypotheses: (1) juvenile Chinook growth was best explained by temporal factors, (2) habitat, or (3) demographic characteristics, such as stock of origin. This study examined estuarine growth rate, incorporating otolith microstructure, individual assignment to stock of origin, GIS habitat mapping, and diet composition along ~130 km of the upper Columbia River estuary. Juvenile Chinook grew on average 0.23 mm/day in the freshwater tidal estuary. When compared to other studies in the basin our growth estimates from the freshwater tidal estuary were similar to estimates in the brackish estuary, but ~4 times slower than those in the plume and upstream reservoirs. However, previous survival studies elucidated a possible tradeoff between growth and survival in the Columbia River basin. Our GLM analysis found that variation in growth was best explained by habitat and an interaction between fork length and month of capture. Juvenile Chinook salmon captured in backwater channel habitats and later in the summer (mid-summer and late summer/fall subyearlings) grew faster than salmon from other habitats and time periods. These findings present a unique example of the complexity of understanding the influences of the many processes that generate variation in growth rate for juvenile anadromous fish inhabiting estuaries.     

Reliability analysis of drilled shaft behavior using finite difference method and <Emphasis Type="Italic">Monte Carlo</Emphasis> simulation

Load displacement analysis of drilled shafts can be accomplished by utilizing the “t-z” method, which models soil resistance along the length and tip of the drilled shaft as a series of springs. For non-linear soil springs, the governing differential equation that describes the soil-structure interaction may be discretized into a set of algebraic equations based upon finite difference methods. This system of algebraic equations may be solved to determine the load–displacement behavior of the drilled shaft when subjected to compression or pullout. By combining the finite difference method with Monte Carlo simulation techniques, a probabilistic load–displacement analysis can be conducted. The probabilistic analysis is advantageous compared to standard factor of safety design because uncertainties with the shaft–soil interface and tip properties can be independently quantified. This paper presents a reliability analysis of drilled shaft behavior by combining the finite difference technique for analyzing non-linear load–displacement behavior with Monte Carlo simulation method. As a result we develop probabilistic relationships for drilled shaft design for both total stress (undrained) and effective stress (drained) parameters. The results are presented in the form of factor of safety or resistance factors suitable for serviceability design of drilled shafts.     

Using a Thermal Proxy to Examine Sediment–Water Exchange in Mid-Continental Shelf Sandy Sediments

Fluid exchange across the sediment–water interface in a sandy open continental shelf setting was studied using heat as a tracer. Summertime tidal oscillation of cross-shelf thermal fronts on the South Atlantic Bight provided a sufficient signal at the sediment–water interface to trace the advective and conductive transport of heat into and out of the seabed, indicating rapid flushing of ocean water through the upper 10–40 cm of the sandy seafloor. A newly developed transport model was applied to the in situ temperature data set to estimate the extent to which heat was transported by advection rather than conduction. Heat transported by shallow 3-D porewater flow processes was accounted for in the model by using a dispersion term, the depth and intensity of which reflected the depth and intensity of shallow flushing. Similar to the results of past studies in shallower and more energetic nearshore settings, transport of heat was greater when higher near-bed velocities and shear stresses occurred over a rippled bed. However, boundary layer processes by themselves were insufficient to promote non-conductive heat transport. Advective heat transport only occurred when both larger boundary layer stresses and thermal instabilities within the porespace were present. The latter process is dependent on shelf-scale heating and cooling of bottom water associated with upwelling events that are not coupled to local-scale boundary layer processes.