Estimation and improvement in the geolocation accuracy of rational polynomial coefficients with minimum GCPs using KOMPSAT-3A

ABSTRACT

In this paper, we propose a method to regenerate Rational Polynomial Coefficients (RPCs) using KOMPSAT-3A imagery and to reduce the geolocation error using minimum ground control points (GCPs). To estimate the new RPCs, the physical sensor model fitted to KOMPSAT-3A imagery was utilized and virtual GCPs over the study area were created. The size of the virtual grid used was 20x20x20. To remove the sensor-related errors in physical sensor model, three different image correction models (image coordinate translation model, shift and drift model, and affine transformation model) were additionally applied. We evaluated our proposed method in two areas within Korea, one in urban (Seoul) and one in rural (Goheung) areas. The results showed that there was a significant improvement after applying the suggested approach in the two areas. The image coordinate translation model is suggested in terms of GCP requirement and expected errors estimated from the error propagation analysis using Gauss–Markov Model (GMM).     

Analysis of resistivity data obtained from cone penetrometer in contaminated soil layers

In horizontally layered soils of different electrical properties, electrical potential distribution becomes complex and the obtained resistivity data may be limited in reflecting the actual soil profile. Thus the objective of this study was to identify the factors that affect resistivity measurement on the cone penetrometer and further investigate the sensitivity of measured resistivity to different types and concentrations of contaminants at the subsurface level. First, a theoretical resistivity equation was derived to provide a means of computing the geometric factor. The effective volume of measurement on the cone penetrometer was investigated and laboratory soil box tests verified the dominance of partially high resistivity regions within the effective volume of measurement over the apparent resistivity. Such effect was found to lead to possible discrepancies between the recorded resistivity data and the actual depth of measurement. Measurements on contaminated soil layers indicated that resistivity cones are efffective in delineating inorganic contaminants in soils of high water contents, and detecting NAPLs floating above the groundwater table provided that soils adjacent to the plume are not dry of water. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A comparison of sea level projections based on the observed and reconstructed sea level data around the Korean Peninsula

In an attempt to estimate accurate local sea level change, “sea level trend” modes are identified and separated from natural variability via cyclostationary empirical orthogonal function (CSEOF) analysis applied to both the tide gauge data (1965–2013) and the reconstruction data (1950–2010) around the Korean Peninsula. For the tide gauge data, ensemble empirical mode decomposition (EEMD) method is also used to estimate sea level trend to understand an uncertainty from different analysis tools. The three trend models—linear, quadratic, and exponential—are fitted to the amplitude time series of the trend mode so that future projection of sea level can be made. Based on a quadratic model, the rate of local sea level rise (SLR) is expected to be 4.63?±?1.1 mm year^?1 during 2010–2060. The estimates of “local” sea level trend vary up to ～30%. It should be noted that, although the three trend models estimate similar sea level trends during the observational period, the projected sea level trend and subsequent SLR differ significantly from one model to another and between the tide gauge data and the reconstruction data; this results in a substantial uncertainty in the future SLR around the Korean Peninsula.     

Radium tracing of submarine groundwater discharge (SGD) and associated nutrient fluxes in a highly-permeable bed coastal zone, Korea

In order to estimate submarine groundwater discharge (SGD) and SGD-driven nutrient fluxes, we measured the concentrations of nutrients, ²²⁴Ra, and ²²⁶Ra in seawater, river water, and coastal groundwater of Yeongil Bay (in the southeastern coast of Korea) in August 2004 and February 2005. The bottom sediments over the shallow areas of this bay are composed mainly of coarse sands. Large excess concentrations of ²²⁴Ra, ²²⁶Ra, and Si supplied from SGD were observed in August 2004, while these excess concentrations were not apparent in February 2005. Based on the mass balance for ²²⁴Ra, ²²⁶Ra, and Si, which showed conservative mixing behavior in seawater, SGD was estimated to be approximately 6 × 10⁶ m³ day^− 1 (seepage rate = 0.2 m day^− 1) in shallow areas (< 9 m water depth) in August 2004, which is much higher than the SGD level typically found in other coastal regions worldwide. During the summer period, SGD-driven nutrients in this bay contributed approximately 98%, 12%, and 76% of the total inputs for dissolved inorganic nitrogen (DIN), phosphorus (DIP), and silicate (DSi), respectively. Our study implies that the ecosystem in this highly permeable bed coastal zone is influenced strongly by SGD during summer, while such influences are negligible in winter.     

Compliance costs and the small fisher: A study of exiters from the New Zealand fishery

Over 3000 predominantly small-scale fishers have exited the New Zealand's quota management system (QMS) between its inception in 1986 and 2000. This study, based on the Ministry of Fisheries database and a questionnaire sent to the exiters, establishes that compliance costs in general, and those specifically related to the QMS, were one of the most consistent reasons for exit. Uncertainty about future QMS policy and the high cost of quota were also significant factors. It appears that the small fishers’ perception of high compliance cost can be supported by industry data.     

Effect of wave amplitude on turbulent flow in a wavy channel by direct numerical simulation

The present study numerically investigates the characteristics of three-dimensional turbulent flow in a wavy channel. For the purpose of a careful observation of the effect of the wave amplitude on the turbulent flow, numerical simulations are performed at a various range of the wave amplitude to wavelength ratio (0.01?α/λ?0.05), where the wavelength is fixed with the same value of the mean channel height (H). The immersed boundary method is used to handle the wavy surface in a rectangular grid system, using the finite volume method. The Reynolds number (Re=U_bH/ν) based on the bulk velocity (U_b) is fixed at 6760. The present computational results for a wavy surface are well compared with those of references. When α/λ=0.02, the small recirculating flow occurs near the trough at the instant, but the mean reverse flow is not observed. In the mean flow field, the reverse flow appears from α/λ=0.03 among the wave amplitude considered in this study. The domain of the mean reverse flow defined by the locations of separation and reattachment depends strongly on the wave amplitude. The pressure drag coefficient augments with increasing the wave amplitude. The friction drag coefficient shows the increase and decrease behavior according to the wave amplitude. The quantitative information about the flow variables such as the distribution of pressure and shear stress on the wavy surface is highlighted.     

Experimental Investigation into the performance of the Axial-Flow-Type Waterjet according to the Variation of Impeller Tip Clearance

The tip clearance inside the duct from the tip of the impeller is very important to the performance of waterjet systems, which fact has been proven in the pump field. The tip clearance is especially important on the model scale because it is very difficult in manufacture to keep the tip clearance constant and minimally small along the inside of the duct. In the present study, a flush-type waterjet propulsion unit (duct, impeller, stator, and nozzle) was designed for an amphibious tracked vehicle. Two impellers of different inner diameter were designed and manufactured in order to investigate the gap effect. Resistance and self-propulsion tests with a 1/5-scale model were conducted in PNU towing tank. The flow rate at the nozzle exit, the static pressure at the various sections along the duct and also the nozzle, the revolution of the impeller, and the torque, thrust, and towing forces at various advanced speeds were measured. Based on these measurements, the performance was analyzed according to the ITTC 96 standard analysis method. Based on this analysis method, the full-scale effective and delivered power of the tracked vehicle was estimated according to the variation of tip clearance.     

Solution of an unstable axisymmetric Cauchy–Poisson problem of dispersive water waves for a spectrum with compact support

 It has been known that the axisymmetric Cauchy–Poisson problem for dispersive water waves is well posed in the sense of stability. Thereby time evolution solutions of wave propagation depend continuously on initial conditions. However, in this paper, it is demonstrated that the axisymmetric Cauchy–Poisson problem is ill posed in the sense of stability for a certain class of initial conditions, so that the propagating solutions do not depend continuously on the initial conditions. In order to overcome the difficulty of the discontinuity, Landweber–Fridman's regularization, famous and well known in applied mathematics, are introduced and investigated to learn whether it is applicable to the present axisymmetric wave propagation problem. From the numerical experiments, it is shown that stable and accurate solutions are realized by the regularization, so that it can be applicable to the determination of the ill-posed Cauchy–Poisson problem.     

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.     

Effects of an Artificial Breakwater on the Distributions of Planktonic Microbial Communities

The summer distributions of planktonic microbial communities (heterotrophic and phtosynthetic bacteria, phtosynthetic and heterotrophic nanoflagellates, ciliate plankton, and microphytoplankton) were compared between inner and outer areas of Lake Sihwa, divided by an artificial breakwater, located on the western coast of Korea, in September 2003. The semienclosed, inner area was characterized by hyposaline surface water (<17 psu), and by low concentrations of dissolved oxygen (avg. 0.4 mg L¹) and high concentrations of inorganic nutrients (nitrogenous nutrients >36 μM, phosphate <4 μM) in the bottom layer. Higher densities of heterotrophic bacteria and nanoflagellates also occurred in the inner area than did in the outer area, while microphytoplankton (mainly diatoms) occurred abundantly in the outer area. A tiny tintinnid ciliate, Tintinnopsis nana, bloomed into more than 10⁶ cells L¹ at the surface layer of the inner area, while its abundance was much lower (10³-10⁴ cells L¹) in the outer area of the breakwater. Ciliate abundance was highly correlated with heterotrophic bacteria (r = 0.886, p < 0.001) and heterotrophic flagellates (r = 0.962, p < 0.001), indicating that rich food availability may have led to theT. nana bloom. These results suggest that the breakwater causes the eutrophic environment in artificial lakes with limited flushing of enriched water and develops into abundant bacteria, nanoflagellates, and ciliates.