我国砂岩型铀矿分带特征研究现状及存在问题

作为一种重要的国家战略资源,砂岩型铀矿床是当今世界上最重要的铀矿床类型之一。本文详细地介绍了砂岩型铀矿在国内外的分布特征及占比情况,并对外生地质作用矿床类型中表生流体作用形成的层间渗透砂岩型和潜水渗透砂岩型铀矿床进行了讨论,发现层间渗透砂岩型铀矿床在外表颜色、矿物组合以及地球化学等方面均具有明显的氧化-还原分带现象,此外,矿床内部还具有细菌分带现象。颜色分带在氧化带、氧化-还原过渡带以及还原带之间具有明显不同的特征;矿物组合在不同分带之间各不相同;地球化学分带表现为U、TOC含量以及Fe~(2+)/Fe~(3+)、Th/U比值在各分带之间差异较大。此外,硫酸盐还原菌、硫杆菌、铁细菌及硝化菌等细菌在不同分带之间的数量相差悬殊,而且硫酸盐还原菌数量与TOC呈明显正相关性。通过矿化带内的碳、硫同位素分析,发现硫酸盐还原菌参与了成矿过程,推测其可能是导致碳、硫同位素分馏的主要因素。总体来看,颜色分带、矿物分带、地球化学分带以及细菌分带均与氧化-还原分带呈耦合关系。本文通过总结层间渗透砂岩型和潜水渗透砂岩型铀矿床的成矿模式和当前分带研究中存在的问题,提出了由细菌、地球化学反应参与的砂岩型铀矿床成矿机理,以及未来亟需解决的若干关键科学问题。典型砂岩型铀矿床的分带现象在物、化、探、遥等领域的异常响应对寻找砂岩型铀矿床具有重要的指导意义。     

拉萨地块林芝杂岩体石榴角闪岩的地球化学特征和年代学研究

本文对位于青藏高原拉萨地体东南缘林芝杂岩中的两类石榴角闪岩进行了详细的地球化学和锆石U-Pb年代学研究。这两类石榴角闪岩分别为硅不饱和的含十字石石榴角闪岩和硅饱和的含石英石榴角闪岩。含十字石石榴角闪岩矿物组合为十字石、石榴子石、角闪石、钠云母、绿泥石、斜长石。石英石榴角闪岩矿物组合为石榴子石、角闪石、石英、斜长石、黑云母。岩石学及变质相平衡研究表明两类石榴角闪岩均经历了高压角闪岩相变质作用。含十字石石榴角闪岩和石英石榴角闪岩具有MORB的地球化学特征,锆石U-Pb年代学分析获得了800~200 Ma的206Pb/238U年龄范围,出现了~430 Ma、~268 Ma和~216 Ma年龄峰值。~430 Ma年龄可能和拉萨地体岩浆活动有关,~268 Ma变质年龄和~216 Ma变质年龄和拉萨地块经历的高压变质作用有关。其中~268 Ma年龄和拉萨地块内部松多高压带榴辉岩的峰期变质年龄一致,而~216 Ma年龄和榴辉岩的围岩含石榴子石片岩年龄一致。对比该区域的年代学研究成果,这表明林芝杂岩体不仅经历了中新生代的变质和岩浆再造活动,还经历了古特提斯洋闭合,南北拉萨地块发生碰撞的晚二叠世的高压变质作用和三叠纪的中压变质作用。     

同步辐射软X射线吸收谱与发射谱测定天然针铁矿能带结构

天然半导体矿物由于成分、缺陷复杂,传统测试方法如紫外可见漫反射等难以准确测定其禁带宽度.本文以针铁矿为例,通过第一性原理计算得到纯针铁矿及掺Al针铁矿的电子结构.计算结果显示,纯针铁矿导带底与价带顶均由Fe3d与O2p轨道组成,而当含杂质Al时,Al2p与O2p发生杂化参与了价带组成.在此基础上,利用同步辐射X射线氧的K边吸收谱与发射谱对纯针铁矿及天然针铁矿的能带结构进行了测定.结果表明,天然含Al的针铁矿禁带宽度为2.30eV,小于纯针铁矿(2.57eV).本研究提供了一种测定天然氧化物矿物禁带宽度的新方法,为深入研究天然半导体可见光催化活性产生机制提供了理论依据.     

基于单元速度泰勒展开的上限原理有限元法

极限分析上限法较极限平衡法有着严谨的理论基础和物理意义。借助于级数展开的思想,通过对速度在单元形心点处一阶泰勒展开,得到了以形心点速度和速度一阶导数为基本未知变量的上限有限元法,该方法丰富了上限有限元基本理论,且可更好地表达与刚体上限法之间的联系。在形成新的上限法的同时,放松单元内任一点均需严格满足上限性质的要求,采用等面积多边形的形式代替外切多边形来逼近摩尔-库仑屈服圆。算例表明:该方法可稳定收敛到真实解,具有和传统Sloan法相同的收敛度;采用等面积多边形逼近形式时,较少的多边形边数即可取得较好的收敛效果,收敛速度大大提高。     

海洋科考船即时通信技术支持能力及应用研究

当今通信技术的发展和应用已渗透到人类社会的各个领域,对社会发展产生巨大影响。在海洋领域,通信技术经历多次重大跨越,从最原始的旗语到现在的卫星移动通信,海陆之间的联系已经变得较为便利。但目前我国海陆即时通信技术还不够完善,给科考船的深远海作业带来诸多不便,轻则影响作业进度,重则造成巨额经济损失甚至人员伤亡。在卫星电话、电子邮件等通信方式存在信号不稳定、直观性差、即时性低等弊端的情况下,研究和开发较为成熟的海陆即时通信技术极为必要。文章探讨科考船在海上作业期间与陆地进行即时通信的方法和可行性,为今后这项技术的发展提供参考。     

Petrology and PGE Abundances of High‐Cr and High‐Al Podiform Chromitites and Peridotites from the Bulqiza Ultramafic Massif,Eastern Mirdita Ophiolite,Albania

The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.     

Comparative study for environmental performances of traditional manufacturing and directed energy deposition processes

Additive manufacturing is considered more sustainable than traditional manufacturing due to its efficient energy and materials usage. However, previous literature indicates that this suggestion is applicable only for the polymer materials, and the environmental issues of additive manufacturing with metallic materials are still not clear. With the method of life cycle assessment, this paper analyzes and compares the energy consumptions and environmental impacts of direct energy deposition and traditional machining processes for a typical metal part. Further, the article attempts to identify the significant issues in the two manufacturing options that contribute most to the environmental impacts. Six environmental impacts were assessed in this study: global warming potential (GWP); acidification potential (AP); eutrophication potential; ozone depletion potential (ODP); photochemical ozone creation potential (POCP); and abiotic depletion potential (ADP). The results show that the gear laser fabrication process consumes more energy and releases more negative emissions compared with traditional gear manufacturing processes. The results of GWP, AP, ODP, ADP and POCP of the traditional gear manufacturing are only 30.33, 43.42, 17, 65.05 and 54.68% of the gear laser fabrication.