Responses of marine phytoplankton in iron enrichment experiments in the northern North Sea and northeast Atlantic Ocean

Short-term iron enrichment experiments were carried out with samples collected in areas with different phytoplankton activity in the northern North Sea and northeast Atlantic Ocean in the summer of 1993. The research area was dominated by high numbers of pico-phytoplankton, up to 70,000 ml⁻¹. Maximum chlorophyll a concentrations varied from about 1.0 μg l⁻¹ in a high-reflectance zone (caused by loose coccoliths, remnants from a bloom of Emiliania huxleyi) and about 3.5 μg l⁻¹ in a zone in which the phytoplankton were growing, to about 0.5 μg l⁻¹ in the northeast Atlantic Ocean. From the high-reflectance zone to the northeast Atlantic Ocean, nitrate concentrations increased from 0.5 μM to 6.0 μM. Concentrations of reactive iron in surface water showed an opposite trend and decreased from about 2.6 nM in the high-reflectance zone to <1.0 nM in the northeast Atlantic Ocean. In the research area, no signs of true iron deficiency were found, but iron enrichments in the high-reflectance zone, numerically dominated by Synechococcus sp., resulted in increased nitrate uptake. Ammonium uptake was hardly affected. Strong support for the effect of Fe on cell physiology is given by the increase in the f-ratio. Net growth rates of the phytoplankton (changes in cell numbers over 24 h) were almost unchanged. Phytoplankton collected from the northeast Atlantic Ocean, did not show changes in the nitrogen metabolism upon addition of iron. Net growth rates in these incubations were low or negative, with only slightly higher values with additional iron.     

Modeling rhamnolipids production by Pseudomonas aeruginosa from immiscible carbon source in a batch system

A mathematical model to predict the rhamnolipids production by Pseudomonas aeruginosa from oleic acid in a two phase liquid-liquid batch reaction system, was developed in this study. The model was based on two theoretical assumptions: 1) the convective oleic acid mass transfer is coupled to a bioreaction in the aqueous liquid bulk, and 2) the volume of the immiscible oleic acid drops and the saturation concentration at the interface are a function of rhamnolipids production. The model was able to accurately predict the experimental growth of the Pseudomonas aeruginosa strain, and the rhamnolipids production data with oleic acid as carbon source. This mathematical approach indicated a high correspondence between the saturation dimensionless profiles of oleic acid at the interface and the experimental profiles of surface tension difference. This modeling approach may constitute a useful tool in the design and scaling-up of bioreactors applied to the production of biosurfactants with immiscible carbon sources.     

Experimental constraints on ultrapotassic magmatism from the Bohemian Massif (durbachite series, Czech Republic)

The equilibrium phase relations of a mafic durbachite (53 wt.% SiO₂) from the Třebíč pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338–335 Ma), have been determined as a function of temperature (900–1,100°C), pressure (100–200 MPa), and H₂O activity (1.1–6.1 wt.% H₂O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni–NiO (NNO) buffer and 2.6 log unit above NNO buffer (∆NNO + 2.6). At 1,100°C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000°C for the whole range of investigated pressure and water content in the melt. At 900°C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (<3–4 wt.% H₂O) and T < 900°C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite–clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.     

Terrestrial photogrammetric techniques applied to the control of a parabolic dune in the Liencres dune system,Cantabria (Spain)

The spatial–temporal variations of a dune system can be determined by using diverse ‘geomatic’ methodologies: geodesy, global positioning system (GPS) and photogrammetry. In the case of the Liencres dune system, a study will be carried out using the ‘close‐range’ photogrammetry technique and the topography technique (total station and GPS). In order to determine the dynamic of the dune system it is necessary to repeat the process of study after a specific interval of time. For this reason, three dimensional data should be available in two different time periods, between which the displacement of the object of analysis (the front portion of the dune) will be significant enough to evaluate its magnitude. This work analyses the viability of photogrammetry for the determination of the spatial–temporal changes of a coastal parabolic dune. Two factors have been analysed: first, the comparison of the photogrammetric results with the results obtained from topographic methods (total station and GPS), and second, the quantification of the displacement of the dune system. The analysis of the correspondence between the movement of different parts of the dune and the influence of the intensity and direction of the prevailing wind in the area is also desired. The dune advanced 12·15 ± 0·06 m (an average of 8·5 m/yr), and the partial implications for the dynamic of human modified processes on the natural park have been established. Copyright © 2008 John Wiley & Sons, Ltd.     

A case study of the internal structures of gossans and weathering processes in the Iberian Pyrite Belt using magnetic fabrics and paleomagnetic dating

In the Rio Tinto district of the Iberian Pryrite Belt of South Spain, the weathering of massive sulfide bodies form iron caps, i.e., true gossans and their subsequent alteration and re-sedimentation has resulted in iron terraces, i.e., displaced gossans. To study the stucture and evolution of both types of gossans, magnetic investigations have been carried out with two foci: (1) the characterisation and spatial distribution of magnetic fabrics in different mineralised settings, including massive sulfides, gossans, and terraces, and (2) paleomagnetic dating. Hematite has been identified as the suceptibility carrier in all sites and magnetic fabric investigation of four gossans reveals a vertical variation from top to bottom, with: (1) a horizontal foliation refered to as “mature” fabric in the uppermost part of the primary gossans, (2) highly inclined or vertical foliation interpreted as “immature” fabric between the uppermost and lowermost parts, and (3) a vertical foliation interpreted to be inherited from Hercynian deformation in the lowermost part of the profiles. In terraces, a horizontal foliation dominates and is interpreted to be a “sedimentary” fabric. Rock magnetic studies of gossan samples have identified goethite as the magnetic remanence carrier for the low-temperature component, showing either a single direction close to the present Earth field (PEF) direction or random directions. Maghemite, hematite, and occasionally magnetite are the remanence carriers for the stable high-temperature component that is characterized by non PEF directions with both normal and reversed magnetic polarities. No reliable conclusion can be yet be drawn on the timing of terrace magnetization due to the small number of samples. In gossans, the polarity is reversed in the upper part and normal in the lower part. This vertical distribution with a negative reversal test suggests remanence formation during two distinct periods. Remanence in the upper parts of the gossans is older than in the lower parts, indicating that the alteration proceeded from top to bottom of the profiles. In the upper part, the older age and the horizontal “mature” fabric is interpreted to be a high maturation stage of massive sulfides’ alteration. In the lower part, the age is younger and the inherited “imature” vertical Hercynian fabric indicates a weak maturation stage. These two distinct periods may reflect changes of paleoclimate, erosion, and/or tectonic motion.     

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.     

Surface area, porosity and water adsorption properties of fine volcanic ash particles

Our understanding on how ash particles in volcanic plumes react with coexisting gases and aerosols is still rudimentary, despite the importance of these reactions in influencing the chemistry and dynamics of a plume. In this study, six samples of fine ash (<100 m) from different volcanoes were measured for their specific surface area, a_s, porosity and water adsorption properties with the aim to provide insights into the capacity of silicate ash particles to react with gases, including water vapour. To do so, we performed high-resolution nitrogen and water vapour adsorption/desorption experiments at 77 K and 303 K, respectively. The nitrogen data indicated a_s values in the range 1.1–2.1 m²/g, except in one case where a a_s of 10 m²/g was measured. This high value is attributed to incorporation of hydrothermal phases, such as clay minerals, in the ash surface composition. The data also revealed that the ash samples are essentially non-porous, or have a porosity dominated by macropores with widths >500 Å. All the specimens had similar pore size distributions, with a small peak centered around 50 Å. These findings suggest that fine ash particles have relatively undifferentiated surface textures, irrespective of the chemical composition and eruption type. Adsorption isotherms for water vapour revealed that the capacity of the ash samples for water adsorption is systematically larger than predicted from the nitrogen adsorption a_s values. Enhanced reactivity of the ash surface towards water may result from (i) hydration of bulk ash constituents; (ii) hydration of surface compounds; and/or (iii) hydroxylation of the surface of the ash. The later mechanism may lead to irreversible retention of water. Based on these experiments, we predict that volcanic ash is covered by a complete monolayer of water under ambient atmospheric conditions. In addition, capillary condensation within ash pores should allow for deposition of condensed water on to ash particles before water reaches saturation in the plume. The total mass of water vapour retained by 1 g of fine ash at 0.95 relative water vapour pressure is calculated to be ~10^–2 g. Some volcanic implications of this study are discussed.Editorial responsibility: J. Gilbert     

PULSE: a finite element code for solving adiabatic nonradial pulsation equations

We briefly present the nonradial adiabatic pulsation code PULSE first developped for white dwarf asteroseismology and now used to compute adiabatic oscillation properties for various types of stellar objects. Numerical tests show that the code is able to provide the accuracy (for a given stellar model) required to deal with the precision in frequency expected from the COROT long runs. While the ultimate objective is to compare the output of various pulsation codes (see these proceedings), we already emphasize problems that need to be addressed concerning, in particular, the mesh resolution of the input stellar models and its impact on the accuracy at which frequencies can be computed.     

Soil feedback drives the mid-Holocene North African monsoon northward in fully coupled CCSM2 simulations with a dynamic vegetation model

We explore climate-vegetation interactions in mid-Holocene North Africa with a suite of community climate system model (CCSM2) simulations. The CCSM includes synchronously coupled atmosphere, ocean, sea ice, land, and vegetation models. The CCSMs present-day precipitation for North Africa compares well with simulations of other models and observations. Mid-Holocene data reveal a wetter and greener Sahara compared to the present. The CCSM exhibits a greater, closer to the expected, precipitation increase than other models, and in response, grasses advance from 18.75° to 22.5°N in much of North Africa. Precipitation is enhanced locally by the northward advance of grasses, but suppressed regionally mainly due to an insufficient albedo decrease with the expansion of vegetation. Prior studies have always lowered the surface albedo with the expansion of vegetation in North Africa. In the CCSMs mid-Holocene simulations, the albedo decreases more because wetter soils are simulated darker than drier soils than due to expanding vegetation. These results isolate albedo as the key ingredient in obtaining a positive precipitation-vegetation feedback in North Africa. Two additional simulations support this conclusion. In the first simulation, the deserts sandy soil textures are changed to loam to represent increased organic matter. Soil water retention and grass cover increase; albedo decreases somewhat. Precipitation responds with a small, yet widespread, increase. In the second simulation, a darker soil color is prescribed for this region. Now the monsoon advances north about 4°. These results illustrate a North African monsoon highly sensitive to changes in surface albedo and less sensitive to changes in evapotranspiration.     

Dwarf elliptical galaxies

Dwarf elliptical (dE) galaxies, with blue absolute magnitudes typically fainter than _MB =?16, are the most numerous type of galaxy in the nearby universe. Tremendous advances have been made over the past several years in delineating the properties of both Local Group satellite dE's and the large dE populations of nearby clusters. We review some of these advances, with particular attention to how well currently available data can constrain

1. models for the formation of dE's
2. the physical and evolutionary connections between different types of galaxies (nucleated and nonnucleated dE's, compact E's, irregulars, and blue compact dwarfs) that overlap in the same portion of the mass-spectrum of galaxies
3. the contribution of dE's to the galaxy luminosity functions in clusters and the field
4. the star-forming histories of dE's and their possible contribution to faint galaxy counts, and
5. the clustering properties of dE's.

In addressing these issues, we highlight the extent to which selection effects temper these constraints, and outline areas where new data would be particularly valuable.