SARG: The High Resolution Spectrograph of TNG

SARG is a cross dispersed echelle spectrograph in operation since late spring 2000 at the Italian Telescopio Nazionale Galileo (TNG) 3.5 m telescope, La Palma. SARG offers both single object and long slit (up to 26 arcsec) observing modes covering a spectral range from λ = 0.37 up to1 μm, with resolution ranging from R = 29,000 up to R = 164,000. Cross dispersion is provided by means of a selection of four grisms; interference filters may be used for the long slit mode (up to 26 arcsec). A dioptric camera images the cross dispersed spectra onto a mosaic of two 2048 × 4096 EEV CCDs (pixel size: 13.5 μm) allowing complete spectral coverage at all resolving power for λ < 0.8 μm. In order to reach a high wavelength calibration precision an iodine-absorbing cell is provided. A Distributed Active Temperature Control System (DATCS) maintains constant the temperature of all spectrograph components at a preset value. Early results show that SARG works according to original specifications in terms of wavelength coverage, efficiency (measured peak efficiency is about 13%),resolution (maximum resolution R = 164,000 using a 0.3 arcsec slit, R ∼144,000 using an image slicer), and stability (preliminary estimates of radial velocity accuracy is ∼3 m/s using the iodine cell and ±150 m/s without the iodine cell). This revised version was published online in July 2006 with corrections to the Cover Date.     

Diffusion effects on oxygen isotope temperatures of slowly cooled igneous and metamorphic rocks

Recently obtained data on oxygen diffusion in feldspars, quartz, and hornblende permit the prediction of the apparent¹⁸O¹⁶O temperatures that would be measured in a rock that consisted only of those three minerals, and cooled slowly from high temperature. The computed temperatures would be based on the differences in the¹⁸O¹⁶O ratios between coexisting pairs of minerals. The present calculation takes into account the diffusion rates for oxygen as a function of temperature, the cooling rate of the rock, the mineral grain sizes, and the mode of the rock. For mineral grains 1 mm in radius, and a cooling rate of 10°C/m.y., the minimum difference in apparent temperature between quartz-feldspar and feldspar-hornblende pairs will be 115°C, despite the assumption of a normal, uneventful, slow cooling history to room temperature. Further, the apparent quartz-hornblende temperature will range over 30°C (590–620°C) depending on the mode of the rock. For a cooling rate of 1000°C/m.y., the apparent difference in temperature can be as much as 400°C. Consequently, consistency in temperatures obtained by oxygen isotope analysis should not be expected in most high-grade metamorphic rocks or igneous rocks which are cooled slowly. Departures from the pattern of temperatures obtained in this model would imply a very rapid quench from high temperature, or a complex history for the rock. For some minerals, including hornblende, the relation between temperature and the equilibrium fractionation of oxygen isotopes between coexisting phases has been derived from observed relations in natural specimens. The choice of the specimens used for such calibrations needs to be re-evaluated in light of these findings. This may result in a change in the equilibrium equation constants.An example from the literature, the San Jose tonalite, Baja California, Mexico, was modelled and yieldsδ¹⁸O concentrations in the minerals that correspond closely with the measured values. This suggests that the model used is appropriate, that the rock has had a simple thermal history, and that it cooled at 100–200°C/m.y. over the temperature range 800–500°C. The set of paleotemperatures obtained for a rock will, in general, yield neither the mineral closure temperatures nor the formation or crystallization temperatures. On the other hand, the cooling rate of the rock may be derived from the data. This, in turn, may have important tectonic implications with regard to denudation and uplift rates.     

Climate control on stacked paleosols in the Pleistocene of the Po Basin (northern Italy)

Paleosols are recurrent features in alluvial successions and provide information about past sedimentary dynamics and climate change. Through sedimentological analysis on six sediment cores, the mud-dominated succession beneath the medieval ‘Two Towers’ of Bologna was investigated down to 100 m depth. A succession of weakly developed paleosols (Inceptisols) was identified. Four paleosols (P1, P2, P3 and PH) were radiocarbon-dated to 40–10 cal ka bp . Organic matter and CaCO₃ determinations indicate low groundwater levels during soil development, which spanned periods < 5 ka. The development and burial of soils, which occurred synchronously in the Bologna region and in other sectors of the Po Plain, are interpreted to reflect climatic and eustatic variations. Climatic oscillations, at the scale of the Bond cycles, controlled soil development and burial during Marine Isotope Stage (MIS) 3 (P1 and P2). Rapid sea-level oscillations probably induced soil development at the MIS 3/2 transition (P3) and favored burial of PH after 10 ka bp . Weakly developed paleosols in alluvial successions can provide clues to millennial-scale climatic and environmental variations. In particular, the paleosol-bearing succession of the Po Plain represents an unprecedent record of environmental changes across the Late Pleistocene (MIS 3 and 2) in the Mediterranean region.     

AVES: A high performance computer cluster array for the INTEGRAL satellite scientific data analysis

In this paper we describe a new computing system array, designed, built and now used at the Space Astrophysics and Planetary Institute (IAPS) in Rome, Italy, for the INTEGRAL Space Observatory scientific data analysis. This new system has become necessary in order to reduce the processing time of the INTEGRAL data accumulated during the more than 9 years of in-orbit operation. In order to fulfill the scientific data analysis requirements with a moderately limited investment the starting approach has been to use a ??cluster?? array of commercial quad-CPU computers, featuring the extremely large scientific and calibration data archive on line.     

Seismicity induced by gas production: I. Correlation of focal mechanisms and dome structure

From August 1976 to June 1979, more than 220 seismic events were recorded by a 7-station network operating over an active gas field in France. 120 earthquakes with magnitudes greater than 1.0 were selected for a detailed study in order to understand the seismic response to a decrease in the gas reservoir pressure of 50 MPa. Composite focal mechanisms were determined for these events. We found that where preexisting fractures were known from well-logs, faults with the most favorable orientation were reactivated. In the part of the gas field where no preexisting faults were known, orientation of the fracture planes was close to the orientations of stratigraphic interfaces.Our kinematic model, constrained by the distribution of the earthquakes and their focal mechanisms, consists of the downward dropping of a block located close to the top of the gas field. The main faults, as defined by the spatial density of the seismic activity, define the limits of this block. The displacements observed along these faults can be either normal or reverse mechanism, dependent on the preexisting orientation of each fault. Another important result is the evidence that the depletion of the gas reservoir exerts the major influence on local seismic displacements, obscuring the effect of regional setting.     

The Var turbidite system (Ligurian Sea, northwestern Mediterranean)—morphology, sediment supply, construction of turbidite levee and sediment waves: implications for hydrocarbon reservoirs

The Var turbidite system is a small sandy system located in the Ligurian Basin. It was deposited during the Pliocene-Quaternary in a flat-floored basin formed during the Messinian salinity crisis. The system was fed through time by the Var and Paillon canyons that connect directly to the Var and Paillon rivers. It is still active during the present sea-level highstand. Two main mechanisms are responsible for gravity-flow triggering in the Var turbidite system: (1) mass-wasting events affect mainly the upper part of the continental slope, in areas where volumes of fresh sediment delivered by rivers are highest, and result from the under-consolidation state of slope sediments and earthquakes, and (2) high-magnitude river floods resulting from melting of snow and convective rainfall during fall and spring seasons, and generating hyperpycnal turbidity currents at river mouths when the density of freshwater transporting suspended particles exceeds that of ambient seawater. Failure- and flood-induced gravity flows are involved through time in the construction of the Var Sedimentary Ridge, the prominent right-hand levee of the Var system, and sediment waves. Processes of construction of both the Var Ridge and sediment waves are closely connected. Sandy deposits are thick and abundant in the eastern (downchannel) part of the ridge. Their distribution is highly constrained by the strong difference of depositional processes across the sediment waves, potentially resulting through time in the individualization of large and interconnected sand bodies.     

Polymorphic Zooids in Deitaic Species Populations of Conopeum seurati (CANU, 1928) (Bryozoa, Cheilostomata)

Abstract. Deltaic populations of Conopeum seurati from diverse environmental settings have variable phenotypes related to strong competitive regimes and to dissolved oxygen minima. Under extremely stressful conditions, the poorly canalized phenotype of C. seurati displays new additional features such as kleistozooids ( kleistós = closed) and chaotic celleporoid layers. Kleistozooids are clearly distinguishable polymorphs characterized by the presence of a compact, imperforate frontal membrane and by a strongly reduced lumen of the "opesium". They commonly aggregate in clusters of regularly-arranged individuals that store a large quantity of proteic material. The inferred function of these cell-like structures is to supply nutrients for basic colony activities. Celleporoid layers are, possibly, a developmental relaxation of the colony of C. seurati for a more efficient use of space in competitive interactions.
Both celleporoid layers and kleistozooids reveal the magnitude of intracolony variability of a widespread opportunistic bryozoan species.