Beach nourishments at Coolangatta Bay over the period 1987–2005: Impacts and lessons

Erosion of the southern Gold Coast beaches (SE Queensland, Australia) was exacerbated after the extension of the Tweed River training walls in the early 1960s. To achieve the objective of restoring and maintaining beach amenity, significant nourishment works have been undertaken in Coolangatta Bay over the past 30 years. Particularly, under the Tweed River Entrance Sand Bypassing Project (TRESBP) since 1995, a number of nourishment campaigns and the implementation of a permanent sand bypass system in 2001 have resulted in significant changes of Coolangatta Bay morphology. The present case study investigates the influence of both wave climate and nourishment works on the area extending from the updrift Snapper Rocks area to downdrift Kirra Beach. SWAN spectral wave model is implemented at Coolangatta Bay area and forced by the global wave model WW3 to estimate wave forcing and the potential natural longshore drift entering in Coolangatta. Specific transects extracted from accurate bathymetric surveys are used to investigate and quantify Coolangatta Bay sedimentation for the period 1987–2005. A network of Argus video stations provides high sample rate information on the shoreline evolution. Results show that, over the past 10 years, Coolangatta Bay has infilled rapidly. Sedimentation reached up to 6 m in some areas between 1995 and 2005, with beach width increasing by 200 m at Kirra Beach. Rapid seaward shoreline migration is consistent with the intense over-pumping of sand relative to the natural potential to move sand alongshore. The nourishment strategy used during this project has successfully delivered large amounts of sand to the southern Gold Coast embayment, although it has been up to now controversial from many community perspectives. The artificial sand bypassing process proved to be much more efficient than depositing the dredged sand in the nearshore area which requires a significant period of low energy condition in order for the deposited sediment to migrate shoreward and weld to the shore. This case study confirms that, when carefully undertaken, sand bypassing is a sustainable and flexible soft engineering approach which can work in concert with natural processes.     

Coordinated Study on Solar Wind Turbulence During the Venus-Express, ACE and Ulysses Alignment of August 2007

At the end of August 2007, Venus, Earth and Ulysses were aligned within a few degrees. This unusual event gives the opportunity to attempt a coordinated study on the radial evolution of solar wind turbulence and coronal transients like CMEs between 0.7 and 1.4 AU. Interplanetary magnetic field data and moments of proton velocity distribution function such as density, speed and temperature are required for this programme and will be provided by ACE at Earth, Venus Express at Venus and Ulysses at 1.4 AU. This project has been recently proposed as a Coordinated Investigation Programme (CIP35) for the International Heliophysical Year.     

Low-pH waters discharging from submarine vents at Panarea Island (Aeolian Islands,southern Italy) after the 2002 gas blast: Origin of hydrothermal fluids and implications for volcanic surveillance

A geochemical survey of thermal waters collected from submarine vents at Panarea Island (Aeolian Islands, southern Italy) was carried out from December 2002 to March 2007, in order to investigate (i) the geochemical processes controlling the chemical composition of the hydrothermal fluids and (ii) the possible relations between the chemical features of the hydrothermal reservoir and the activity of the magmatic system. Compositional data of the thermal water samples were integrated in a hydrological conceptual model, which describes the formation of the vent fluid by mixing of seawater, seawater concentrated by boiling, and a deep, highly-saline end-member, whose composition is regulated by water-rock interactions at relatively high temperature and shows clear clues of magmatic-related inputs. The chemical composition of concentrated seawater was assumed to be represented by that of the water sample having the highest Mg content. The composition of the deep end-member was instead calculated by extrapolation assuming a zero-Mg end-member. The Na–K–Ca geothermometer, when applied to the thermal end-member composition, indicated an equilibrium temperature of approximately 300 °C, a temperature in agreement with the results obtained by gas-geothermometry.     

Diffusion effects on oxygen isotope temperatures of slowly cooled igneous and metamorphic rocks

Recently obtained data on oxygen diffusion in feldspars, quartz, and hornblende permit the prediction of the apparent¹⁸O¹⁶O temperatures that would be measured in a rock that consisted only of those three minerals, and cooled slowly from high temperature. The computed temperatures would be based on the differences in the¹⁸O¹⁶O ratios between coexisting pairs of minerals. The present calculation takes into account the diffusion rates for oxygen as a function of temperature, the cooling rate of the rock, the mineral grain sizes, and the mode of the rock. For mineral grains 1 mm in radius, and a cooling rate of 10°C/m.y., the minimum difference in apparent temperature between quartz-feldspar and feldspar-hornblende pairs will be 115°C, despite the assumption of a normal, uneventful, slow cooling history to room temperature. Further, the apparent quartz-hornblende temperature will range over 30°C (590–620°C) depending on the mode of the rock. For a cooling rate of 1000°C/m.y., the apparent difference in temperature can be as much as 400°C. Consequently, consistency in temperatures obtained by oxygen isotope analysis should not be expected in most high-grade metamorphic rocks or igneous rocks which are cooled slowly. Departures from the pattern of temperatures obtained in this model would imply a very rapid quench from high temperature, or a complex history for the rock. For some minerals, including hornblende, the relation between temperature and the equilibrium fractionation of oxygen isotopes between coexisting phases has been derived from observed relations in natural specimens. The choice of the specimens used for such calibrations needs to be re-evaluated in light of these findings. This may result in a change in the equilibrium equation constants.An example from the literature, the San Jose tonalite, Baja California, Mexico, was modelled and yieldsδ¹⁸O concentrations in the minerals that correspond closely with the measured values. This suggests that the model used is appropriate, that the rock has had a simple thermal history, and that it cooled at 100–200°C/m.y. over the temperature range 800–500°C. The set of paleotemperatures obtained for a rock will, in general, yield neither the mineral closure temperatures nor the formation or crystallization temperatures. On the other hand, the cooling rate of the rock may be derived from the data. This, in turn, may have important tectonic implications with regard to denudation and uplift rates.     

Combining a Detailed Building Energy Model with a Physically-Based Urban Canopy Model

A scheme that couples a detailed building energy model, EnergyPlus, and an urban canopy model, the Town Energy Balance (TEB), is presented. Both models are well accepted and evaluated within their individual scientific communities. The coupled scheme proposes a more realistic representation of buildings and heating, ventilation and air-conditioning (HVAC) systems, which allows a broader analysis of the two-way interactions between the energy performance of buildings and the urban climate around the buildings. The scheme can be used to evaluate the building energy models that are being developed within the urban climate community. In this study, the coupled scheme is evaluated using measurements conducted over the dense urban centre of Toulouse, France. The comparison includes electricity and natural gas energy consumption of buildings, building façade temperatures, and urban canyon air temperatures. The coupled scheme is then used to analyze the effect of different building and HVAC system configurations on building energy consumption, waste heat released from HVAC systems, and outdoor air temperatures for the case study of Toulouse. Three different energy efficiency strategies are analyzed: shading devices, economizers, and heat recovery.     

Cell parameters of thermally treated anorthite. Al,Si configurations in the average structures of the high temperature calcic plagioclases

Thermal treatments of anorthite carried out at up to 1,547° C show that the unit cell parameter changes as a function of the treatment temperature. The best fit curve found by non-linear least squares analysis is: =91.419-(0.327·10^-6)T ²+(0.199·10^-12)T ⁴-(0.391·10)T ⁶. The results obtained support significant Al,Si disorder (Al0.10, where Al=t ₁(0)-1/3 [t ₁(m)+t ₂(0)+t ₂(m)], Ribbe 1975), in anorthite equilibrated near the melting point and confirm a high temperature series differentiated from the low temperature series for calcic plagioclases in the An₈₅–An₁₀₀ range also. In the plot vs. An-content the high and low temperature curves intersect at An₈₅ composition and progressively diverge in the An₈₅–An₁₀₀ range. The trends of the high and low temperature curves in this range are interpretable on the basis of the degree of Al, Si order in the average structures of calcic plagioclases.     

Instability structures, synsedimentary faults and turbidites, witnesses of a Liassic seismotectonic activity in the Dauphiné Zone (French Alps): A case example in the Lower Pliensbachian at Saint-Michel-en-Beaumont

Instability structures, synsedimentary faults and turbidites have been studied in the Lower Pliensbachian succession of Saint-Michel-en-Beaumont, belonging to the Taillefer block, an ancient half-graben emplaced during the Liassic Tethyan rifting. Geometrical and mechanical analyses demonstrate that the instability structures occurred thanks to movements along spineless synsedimentary normal faults, when the turbiditic and limestone layers were already case-hardened and partly fractured by tension gashes even when the mudstones were still unlithified. Both the tension gashes and the synsedimentary faults are homogeneous in strike with the major regional faults and are in good agreement with the regional direction of extension for this period. The characters of the turbiditic beds, with erosive base, graded bedding, and incomplete Bouma sequence, are in favour of a seismic origin. Instability structures, spineless synsedimentary faults and turbiditic inflows are thus considered as seismites and interpreted as the result of high seismicity periods including some events with M > 5 in the general extensive ambiance of the Liassic Tethyan rifting. The analysis of the geometrical relationships between all these sedimentary features allows to distinguish the successive stage of occurrence of an instability structure, from the sedimentation of alternating marls and limestones, and sudden turbiditic inflows, then early case-hardening of the turbidites, until the important seismotectonic event generating the spineless normal faults, themselves triggering the fall of indurated blocks and locally the forming of breccias. The Ornon Fault, which constitutes the border of the Taillefer block, 15 km eastward, played a major role during the Liassic sedimentation and may represent the major seismic fault related to the seismites occurrence in the Beaumont basin.     

GPCC's new land surface precipitation climatology based on quality-controlled in situ data and its role in quantifying the global water cycle

In 1989, the need for reliable gridded land surface precipitation data sets, in view of the large uncertainties in the assessment of the global energy and water cycle, has led to the establishment of the Global Precipitation Climatology Centre (GPCC) at Deutscher Wetterdienst on invitation of the WMO. The GPCC has calculated a precipitation climatology for the global land areas for the target period 1951–2000 by objective analysis of climatological normals of about 67,200 rain gauge stations from its data base. GPCC's new precipitation climatology is compared to several other station-based precipitation climatologies as well as to precipitation climatologies derived from the GPCP V2.2 data set and from ECMWF's model reanalyses ERA-40 and ERA-Interim. Finally, how GPCC's best estimate for terrestrial mean precipitation derived from the precipitation climatology of 786 mm per year (equivalent to a water transport of 117,000 km³) is fitting into the global water cycle context is discussed.     

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.