Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 1: Numerical modelling

The boundary-element method has been widely used as a design tool in the offshore and ship building industry for more than 30 years. Its application to wave energy conversion is, however, more recent. This paper deals with the numerical modelling of a free-floating sloped wave energy device. The power take-off mechanism of the device consists of an immersed tube with a piston sliding inside. The modelling is done using the boundary-element method package WAMIT. The model is first worked out for the case where the axis of the tube is vertical. It is then derived for the tube inclined and successfully verified against numerical benchmark data. A companion paper presents results of a detailed comparison with a physical model study.     

Assessing New England's waterborne energy imports (1995–2004)

This paper tests four hypotheses relating to the waterborne commerce of New England's imported energy, by port of entry, from 1995 through 2004. It concludes that the region's ports engaged in this fossil fuel traffic are part of a hierarchical system of large, medium, and small ports; that such energy flows have increased over the study period; that localized demand for energy is the principal component leading to growth; and that regional inter-port competition was not stable.     

Breaking wave loads at vertical seawalls and breakwaters

This paper presents recent advances in knowledge on wave loads, based on experimental work carried out in the CIEM/LIM large flume at Barcelona within the framework of the VOWS (Violent Overtopping by Waves at Seawalls) project. Both quasi-static and impact wave forces from the new data set have been compared with predictions by empirical and analytical methods. The scatter in impact forces has been found to be large over the whole range of measurements, with no existing method giving especially good predictions. Based on general considerations, a simple and intuitive set of prediction formulae has been introduced for quasi-static and impact forces, and overturning moments, giving good agreement with the new measurements. New prediction formulae have been compared with previous measurements from physical model tests at small and large scale, giving satisfactory results over a relatively wide range of test conditions. The time variation of wave impacts is discussed, together with pressure distribution up the wall, which shows that within experimental limitations the measured pressures are within existing limits of previous study.     

Statistically downscaled probabilistic multi‐model ensemble projections of precipitation change in a watershed

This paper presents the development of a probabilistic multi‐model ensemble of statistically downscaled future projections of precipitation of a watershed in New Zealand. Climate change research based on the point estimates of a single model is considered less reliable for decision making, and multiple realizations of a single model or outputs from multiple models are often preferred for such purposes. Similarly, a probabilistic approach is preferable over deterministic point estimates. In the area of statistical downscaling, no single technique is considered a universal solution. This is due to the fact that each of these techniques has some weaknesses, owing to its basic working principles. Moreover, watershed scale precipitation downscaling is quite challenging and is more prone to uncertainty issues than downscaling of other climatological variables. So, multi‐model statistical downscaling studies based on a probabilistic approach are required. In the current paper, results from the three well‐reputed statistical downscaling methods are used to develop a Bayesian weighted multi‐model ensemble. The three members of the downscaling ensemble of this study belong to the following three broad categories of statistical downscaling methods: (1) multiple linear regression, (2) multiple non‐linear regression, and (3) stochastic weather generator. The results obtained in this study show that the new strategy adopted here is promising because of many advantages it offers, e.g. it combines the outputs of multiple statistical downscaling methods, provides probabilistic downscaled climate change projections and enables the quantification of uncertainty in these projections. This will encourage any future attempts for combining the results of multiple statistical downscaling methods. Copyright © 2011 John Wiley & Sons, Ltd.     

Fluids in the lithosphere, 2. Experimental constraints on CO2 transport in dunite and quartzite at elevated P-T conditions with implications for mantle and crustal decarbonation processes

In a series of experiments at 0.5–1.3 GPa and 1050–1200°C we have monitored the transport, via crack propagation, of CO₂ into well-annealed olivine and quartz aggregates. The objectives were to determine (1) the extent and rate of fluid penetration; (2) the effect of varying both P-T conditions and microstructure; and (3) the fluid penetration pathways. Experiments on CO₂ penetration into dunite annealed in the absence of MgO indicate rapid and pervasive fluid transport on a grain-dimension scale, but a limited penetration distance ( 1 mm). Additional experiments on dunite annealed in the presence of MgO (either dispersed or present at both ends), however, resulted in CO₂ penetration that was both pervasive on the scale of individual grains and almost always completely through the 5 mm long samples. The abundance of fine (10 μm) grains in the MgO-free dunite, in contrast to the much larger grain sizes of the samples annealed with MgO present, suggests the difference in fluid penetration behavior may arise because the strength variation in dunite scales with the grain size. Effects arising from changes in olivine point defect chemistry, however, are an additional possibility. The response of synthetic quartzite to CO₂ overpressure is distinct from that of dunite: Quartzite experiences rapid and complete penetration of CO₂, via a macroscopically visible system of transgranular fractures, over the range of P-T conditions investigated.The small amount of porosity ( 2–3%) present in most rock samples fabricated for this study, lacks three-dimensional connectivity, thus precluding any enhanced fluid penetration via porous flow. Pores could possibly enhance fluid penetration as the result of a small reduction in resistance to fracture, but the probable abundance of strength-controlling flaws in natural rocks is likely to produce similar behavior.The results of our experiments on olivine and olivine + MgO suggest that the transport of pressurized CO₂ in very olivine-rich mantle environments will be pervasive on the scale of individual grains and its extent may be dependent on rock microstructure and/or crystal chemical effects. Such pervasive fluid transport, perhaps associated with magma decarbonation, may have interesting implications for both magma transport and local LREE enrichment of adjacent mantle wall-rock. The ease with which quartzite is penetrated by CO₂ at the conditions of our experiments underscores the possible role of decarbonation reactions in crustal permeability-enhancement processes.     

Comparison of amplitude decay rates in reflection,refraction, and local earthquake records

Three types of seismic data recorded near Coalinga, California were analyzed to study the behavior of scattered waves: 1) aftershocks of the May 2, 1983 earthquake, recorded on verticalcomponent seismometers deployed by the USGS; 2) regional refraction profiles using large explosive sources recorded on essentially the same arrays above; 3) three common-midpoint (CMP) reflection surveys recorded with vibrator sources over the same area. Records from each data set were bandpassed filtered into 5 Hz wide passbands (over the range of 1–25 Hz), corrected for geometric spreading, and fit with an exponential model of amplitude decay. Decay rates were expressed in terms of inverse codaQ (Q _c ^–1 ).Q _c ^–1 values for earthquake and refraction data are generally comparable and show a slight decrease with increasing frequency. Decay rates for different source types recorded on proximate receivers show similar results, with one notable exception. One set of aftershocks shows an increase ofQ _c ^–1 with frequency.Where the amplitude decay rates of surface and buried sources are similar, the coda decay results are consistent with other studies suggesting the importance of upper crustal scattering in the formation of coda. Differences in the variation ofQ _c ^–1 with frequency can be correlated with differences in geologic structure near the source region, as revealed by CMP-stacked reflection data. A more detailed assessment of effects such as the depth dependence of scattered contributions to the coda and the role of intrinsic attenuation requires precise control of source-receiver field geometry and the study of synthetic seismic data calculated for velocity models developed from CMP reflection data.     

Generation of Hydrogen Gas as a Result of Drilling Within the Saturated Zone

Hydrogen gas was discovered within the steel casing above standing water in a percussion-drilled borehole on the Hanlord Site in south-central Washington state. In situ measurements of the borehole fluids indicated anoxic, low-Eh (<-400 mV) conditions. Ground water sampled from adjacent wells in the same formation indicated that the ground water was oxygenated. H₂ was generated during percussion drilling, due to the decomposition of borehole waters as a result of aqueous reactions with drilled sediment and steel from the drilling tools or casing. The generation of H₂ within percussion-drilled boreholes that extend below the water table may be more common than previously realized. The ambient concentration of H₂ produced during drilling was limited by microbial activity within the casing-resident fluids. H₂ was generated abiotically in the laboratory, whereby sterilized borehole slurry samples produced 100 times more H₂ than unsterilizcd samples. It appears that H₂ is metabolized by microorganisms and concentrations might be significantly greater if not for microbial metabolism.     

Genetic structure of bay anchovy (Anchoa mitchilli) populations in Chesapeake Bay

To determine the genetic structure of the bay anchovy (Anchoa mitchilli) within Chesapeake Bay, 16 isozyme systems encoding 21 loci for 20 population were examined using horizontal starch gel electrophoresis. Contingency Chisquare analysis revealed significant allelic frequency differences at nine loci (AAT-1, AAT-2, ALD-1, CPK-2, GAP-1, GLY-1, LDH-1, MDH-1, and MDH-2). Two loci, ALD-1 and MDH-1, were responsible for nine of 14 tests not conforming to Hardy-Weinberg expectations, with some of these deviations attributed to possible scoring and/or sampling error. Estimates for mean average heterozygosity were relatively high, ranging from 0.40 to 0.096, with 33–57% of the loci polymorphic. A low F_st value (0.041) along with high genetic identity estimates (I=0.997) indicated little substructuring of bay anchovy populations within Chesapeake Bay.