Trace element partitioning between vapor, brine and halite under extreme phase separation conditions

Experiments were conducted to investigate the partitioning of Li, Br, Rb, Cs and B between vapor, brine and halite during subcritical and supercritical phase separation in the NaCl-H₂O system (388-550 °C, 250-350 bars). Results indicate that Li and Br partition preferentially into the low-salinity vapor fluids, while Rb and Cs become more enriched in the coexisting brines. Under more extreme conditions of pressure and temperature in the two-phase region, especially near the vapor-brine-halite boundary, strong salting-out effects imposed on neutral aqueous species enhance significantly partitioning of all trace elements into the low-salinity fluid. Dissolved boron is strongly affected by this and a particularly strong enrichment into vapors is observed, a trend that can be effectively correlated with changes in reduced density. Exclusion of Li, Br, Rb, Cs and B from halite, when precipitated, further increases the solubility of these species in the coexisting Cl-poor fluid. In general, the lack of distortion in the partitioning behavior of trace elements between vapor, brine and/or halite with the transition from subcritical to supercritical conditions in the NaCl-H₂O system precludes the need for special reference to the critical point of seawater when interpreting phase relations in submarine hydrothermal systems. The combination of experimentally determined trace element partitioning data with constraints imposed by mineral solubility provides a means to better understand the origin and evolution of hot spring vent fluids. For example, in Brandon hydrothermal system (21°S EPR) supercritical phase separation and subseafloor mixing appear to be the main heat and mass transport mechanisms fueled by a shallow magmatic intrusion, with boron systematics ruling out major contributions from magmatic degassing processes accompanying the near-seafloor volcanism.     

When hazard avoidance is not an option: lessons learned from monitoring the postdisaster Oso landslide,USA

On 22 March 2014, a massive, catastrophic landslide occurred near Oso, Washington, USA, sweeping more than 1 km across the adjacent valley flats and killing 43 people. For the following 5 weeks, hundreds of workers engaged in an exhaustive search, rescue, and recovery effort directly in the landslide runout path. These workers could not avoid the risks posed by additional large-scale slope collapses. In an effort to ensure worker safety, multiple agencies cooperated to swiftly deploy a monitoring and alerting system consisting of sensors, automated data processing and web-based display, along with defined communication protocols and clear calls to action for emergency management and search personnel. Guided by the principle that an accelerating landslide poses a greater threat than a steadily moving or stationary mass, the system was designed to detect ground motion and vibration using complementary monitoring techniques. Near real-time information was provided by continuous GPS, seismometers/geophones, and extensometers. This information was augmented by repeat-assessment techniques such as terrestrial and aerial laser scanning and time-lapse photography. Fortunately, no major additional landsliding occurred. However, we did detect small headscarp failures as well as slow movement of the remaining landslide mass with the monitoring system. This was an exceptional response situation and the lessons learned are applicable to other landslide disaster crises. They underscore the need for cogent landslide expertise and ready-to-deploy monitoring equipment, the value of using redundant monitoring techniques with distinct goals, the benefit of clearly defined communication protocols, and the importance of continued research into forecasting landslide behavior to allow timely warning.

     

Time scale of an early to mid-Paleozoic orogenic cycle of the long-lived Central Asian Orogenic Belt, Inner Mongolia of China: Implications for continental growth

We present a detailed, new time scale for an orogenic cycle (oceanic accretion–subduction–collision) that provides significant insights into Paleozoic continental growth processes in the southeastern segment of the long-lived Central Asian Orogenic Belt (CAOB). The most prominent tectonic feature in Inner Mongolia is the association of paired orogens. A southern orogen forms a typical arc-trench complex, in which a supra-subduction zone ophiolite records successive phases during its life cycle: birth (ca. 497–477 Ma), when the ocean floor of the ophiolite was formed; (2) youth (ca. 473–470 Ma), characterized by mantle wedge magmatism; (3) shortly after maturity (ca. 461–450 Ma), high-Mg adakite and adakite were produced by slab melting and subsequent interaction of the melt with the mantle wedge; (4) death, caused by subduction of a ridge crest (ca. 451–434 Ma) and by ridge collision with the ophiolite (ca. 428–423 Ma). The evolution of the magmatic arc exhibits three major coherent phases: arc volcanism (ca. 488–444 Ma); adakite plutonism (ca. 448–438 Ma) and collision (ca. 419–415 Ma) of the arc with a passive continental margin. The northern orogen, a product of ridge-trench interaction, evolved progressively from coeval generation of near-trench plutons (ca. 498–461 Ma) and juvenile arc crust (ca. 484–469 Ma), to ridge subduction (ca. 440–434 Ma), microcontinent accretion (ca. 430–420 Ma), and finally to forearc formation. The paired orogens followed a consistent progression from ocean floor subduction/arc formation (ca. 500–438 Ma), ridge subduction (ca. 451–434 Ma) to microcontinent accretion/collision (ca. 430–415 Ma); ridge subduction records the turning point that transformed oceanic lithosphere into continental crust. The recognition of this orogenic cycle followed by Permian–early Triassic terminal collision of the CAOB provides compelling evidence for episodic continental growth.     

Gaseous mercury emissions from urban surfaces: Controls and spatiotemporal trends

The spatial and temporal variability of Hg emissions from urban paved surfaces was assessed through repeated measurements under varying environmental conditions at six sample sites in Toronto, Ontario, Canada. The results show significant spatial variability of the Hg emissions with median values ranging from below detection limit to 5.2 ng/m²/h. Two of the sites consistently had higher Hg emissions (on several occasions >20 ng/m²/h) than the other 4, which were equivalently low (maximum emission: 2.1 ng/m²/h). A surrogate measure of the pavement Hg concentrations was obtained during each day of sampling through the collection of street dust. The median street dust concentration also showed significant spatial variability (ranging from 9.6 to 44.5 ng/g). Regression analysis showed that the spatial variability of the Hg emissions was significantly related to the street dust concentrations. Controlled experiments using Hg amended street dust confirmed the relationship between Hg surface concentration and emission magnitude. Within a given sample site, Hg emissions varied temporally and multiple regression analysis showed that within-site variability was significantly influenced by changes in solar radiation with only a minor effect from surface temperature. Controlled experiments using shade cloths confirmed that solar radiation can have a large influence on the magnitude of Hg emissions within a given site. The emissions measured in Toronto were contextualized through comparison sampling in Austin, Texas. The Hg emissions measured in Austin were within the range detected in Toronto and also showed significant correlation with Hg street dust concentrations between sites. To provide a holistic assessment of Hg emissions from urban environments, samples were also collected from other common urban surfaces (soil, roofs, and windows). Soils consistently had higher emissions than all the other surfaces (7.3 ng/m²/h, n = 39).     

Atypical stratiform sulfide-poor platinum-group element mineralisation in the Agnew – Wiluna Belt komatiites,Wiluna, Western Australia

A new style of komatiite-associated sulfide-poor platinum-group element (PGE: Os, Ir, Ru, Rh, Pt, Pd) mineralisation has been identified at Wiluna in the strongly nickel sulfide (NiS) mineralised Agnew – Wiluna Greenstone Belt, Western Australia. The komatiite sequence at Wiluna is ～200 m thick and comprises a basal pyroxenite layer, a thick ortho-to-mesocumulate-textured peridotite core, which is overlain by rhythmically layered wehrlite, oikocrystic pyroxenite and thick upper gabbroic margins. Pegmatoid and dendritic (harrisitic) domains are common features, whereas spinifex-textured horizons and flow-top breccias are absent. The presence of anomalous PGE-enriched horizons (ΣPt – Pd = 200 – 500 ppb) in the oikocrystic pyroxenite and in the layered melagabbro and gabbronorite horizons directly overlying the wehrlite unit is due to the presence of fine-grained (1 – 10 μm) platinum-group minerals (PGMs). More than 70 PGM grains were identified, and a considerable mineralogical variability was constrained. However, only Pd – Pt-bearing phases were identified, whereas no Ir – Ru-bearing PGMs were found in any of the sections examined. Interestingly, all PGMs are not in paragenetic association with sulfides, and only sulfide-poor/free intervals contain significant PGM concentrations. The whole-rock PGE sequence largely reflects the PGM distribution. It is hypothesised that the Pd – Pt enrichment in the oikocrystic pyroxenite and melagabbros and the overall Ir – Ru depletion in the upper mafic section of the sequence are the result of extensive olivine and chromite crystallisation in the basal ultramafic section. PGE saturation was driven by extensive crystallisation of silicate and oxide phases in a sulfide-undersaturated environment. The crystallisation of clinopyroxene in the oikocrystic pyroxenite horizon may have triggered the formation of Pt – Pd-bearing alloys and arsenides, which were the first PGMs to form. Stratiform sulfide-poor PGE mineralisation at Wiluna is more similar in stratigraphic setting, style and composition to PGE-rich sulfide-poor mineralisation zones in thick differentiated intrusions, rather than to other PGE-enriched zones in komatiite-hosted systems, where PGE enrichment is directly associated with accumulations of magmatic sulfides.     

Diatom assemblages from Costa Rican lakes: an initial ecological assessment

We compared the distributions of 59 diatom species in surface sediments of 25 Costa Rican lakes with 21 environmental variables using canonical correspondence analysis (CCA). The distribution of taxa was related to the chemical and physical characteristics of the lakes. The most influential chemical variables were cation concentrations (especially magnesium) and related variables such as water hardness, pH, and temperature. Lake area and lake depth were among the most important physical variables.A number of taxa were identified as potential environmental indicators. The diatoms Brachysira serians var. brachysira and Frustulia rhomboides seem to be associated with low values of alkalinity, hardness, Ca, Mg, and SiO2. Cymbella minuta var. silesiaca is associated with low to moderate values of alkalinity, hardness, Ca, and Mg. Nitzschia cf. amphibia may be an indicator of moderate-to-high concentrations of Mg. Pinnularia braunii var. amphicephala seems to prefer low values of hardness, Ca, Mg, and SiO2.In many closed lakes, these environmental variables (Mg/Ca/hardness/alkalinity) increase with effective evaporation. Consequently, these diatoms may be indirectly tracking P:E ratios. Results from this initial, small data set indicate the potential of diatoms for inferring lake paleochemistry, and perhaps P:E ratios, in Costa Rica.     

Wetland hydroperiod classification in the western prairies using multitemporal synthetic aperture radar

Wetlands represent one of the world's most biodiverse and threatened ecosystem types and were diminished globally by about two‐thirds in the 20th century. There is continuing decline in wetland quantity and function due to infilling and other human activities. In addition, with climate change, warmer temperatures and changes in precipitation and evapotranspiration are reducing wetland surface and groundwater supplies, further altering wetland hydrology and vegetation. There is a need to automate inventory and monitoring of wetlands, and as a study system, we investigated the Shepard Slough wetlands complex, which includes numerous wetlands in urban, suburban, and agricultural zones in the prairie pothole region of southern Alberta, Canada. Here, wetlands are generally confined to depressions in the undulating terrain, challenging wetlands inventory and monitoring. This study applied threshold and frequency analysis routines for high‐resolution, single‐polarization (HH) RADARSAT‐2, synthetic aperture radar mapping. This enabled a growing season surface water extent hyroperiod‐based wetland classification, which can support water and wetland resource monitoring. This 3‐year study demonstrated synthetic aperture radar‐derived multitemporal open‐water masks provided an effective index of wetland permanence class, with overall accuracies of 89% to 95% compared with optical validation data, and RMSE between 0.2 and 0.7 m between model and field validation data. This allowed for characterizing the distribution and dynamics of 4 marsh wetlands hydroperiod classes, temporary, seasonal, semipermanent, and permanent, and mapping of the sequential vegetation bands that included emergent, obligate wetland, facultative wetland, and upland plant communities. Hydroperiod variation and surface water extent were found to be influenced by short‐term rainfall events in both wet and dry years. Seasonal hydroperiods in wetlands were particularly variable if there was a decrease in the temporary or semipermanent hydroperiod classes. In years with extreme rain events, the temporary wetlands especially increased relative to longer lasting wetlands (84% in 2015 with significant rainfall events, compared with 42% otherwise).     

Suspended‐sediment sources in an urban watershed,Northeast Branch Anacostia River,Maryland

Fine sediment sources were characterized by chemical composition in an urban watershed, the Northeast Branch Anacostia River, which drains to the Chesapeake Bay. Concentrations of 63 elements and two radionuclides were measured in possible land‐based sediment sources and suspended sediment collected from the water column at the watershed outlet during storm events. These tracer concentrations were used to determine the relative quantity of suspended sediment contributed by each source. Although this is an urbanized watershed, there was not a distinct urban signature that can be evaluated except for the contributions from road surfaces. We identified the sources of fine sediment by both physiographic province (Piedmont and Coastal Plain) and source locale (streambanks, upland and street residue) by using different sets of elemental tracers. The Piedmont contributed the majority of the fine sediment for seven of the eight measured storms. The streambanks contributed the greatest quantity of fine sediment when evaluated by source locale. Street residue contributed 13% of the total suspended sediment on average and was the source most concentrated in anthropogenically enriched elements. Combining results from the source locale and physiographic province analyses, most fine sediment in the Northeast Branch watershed is derived from streambanks that contain sediment eroded from the Piedmont physiographic province of the watershed. Sediment fingerprinting analyses are most useful when longer term evaluations of sediment erosion and storage are also available from streambank‐erosion measurements, sediment budget and other methods. Copyright © 2010 John Wiley & Sons, Ltd.     

Seasonal variation of the stable isotopic compositions of coastal marine plankton from Woods Hole,Massachusetts and Georges Bank

A study of the isotopic composition of plankton from Woods Hole Harbor was conducted to investigate seasonal variation in carbon and nitrogen stable isotopes in a shallow coastal environment. Stable isotopic ratios of carbon and nitrogen both showed temporal variation on the scale of weeks to months, with heaviest (most positive) values in summer to fall for both isotopes. Particulate organic matter (POM) δ¹³C values were highest (?19‰ to ?21‰) in August to November and lower (?21‰ to ?25‰) at other times of the year, while δ¹³N-POM values were highest (9.5‰ to 12‰) in March to September and lower (7.5‰ to 9.5‰) at other times of the year. Stable isotopic values were significantly correlated with temperature, DI¹³C, and C∶N ratios, but not with [DIC], [POC], [PN], [chlorophyll], or the taxonomic composition of the phytoplankton. There was no direct evidence of allochthonous inputs of carbon and nitrogen to the system. Woods Hole δ¹³C values were virtually identical to Georges Bank plankton values; similar POC: Chlorophyll and C∶N ratios in the two systems further suggest that Woods Hole Harbor is principally a marine system. The high δ¹³C values of net plankton (>20 μm) during summer and early fall are consistent with a smaller degree of photosynthetic isotopic fractionation at that time, related to temperature and/or [CO_2(aq)]. This pattern was not seen, however, in total POM. Plankton δ¹³N values were higher in Woods Hole Harbor than on Georges Bank, especially during warmer periods, possibly due to high rates of nitrification and organic matter recycling in Woods Hole waters. Relatively wide ranges of stable isotopic values from both Woods Hole Harbor and Georges Bank suggest that seasonality should be considered when attempting to establish endmember C and N isotopic values for temperate marine plankton. Preliminary results from size-fractionated samples suggest that cyanobacteria may fractionate carbon isotopes to a greater degree than net phytoplankton.