Petrogenesis of lunar impact melt rock meteorite Oued Awlitis 001

Oued Awlitis 001 is a highly feldspathic, moderately equilibrated, clast‐rich, poikilitic impact melt rock lunar meteorite that was recovered in 2014. Its poikilitic texture formed due to moderately slow cooling, which judging from textures of rocks in melt sheets of terrestrial impact structures, is observed in impact melt volumes at least 100 m thick. Such coherent impact melt volumes occur in lunar craters larger than ~50 km in diameter. The composition of Oued Awlitis 001 points toward a crustal origin distant from incompatible‐element‐rich regions. Comparison of the bulk composition of Oued Awlitis 001 with Lunar Prospector 5° γ‐ray spectrometer data indicates a limited region of matches on the lunar farside. After its initial formation in an impact crater larger than ~50 km in diameter, Oued Awlitis 001 was excavated from a depth greater than ~50 m. The cosmogenic nuclide inventory of Oued Awlitis 001 records ejection from the Moon 0.3 Ma ago from a depth of at least 4 m and little mass loss due to ablation during its passage through Earth's atmosphere. The terrestrial residence time must have been very short, probably less than a few hundred years; its exact determination was precluded by a high concentration of solar cosmic ray‐produced ¹⁴C. If the impact that excavated Oued Awlitis 001 also launched it, this event likely produced an impact crater >10 km in diameter. Using petrologic constraints and Lunar Reconnaissance Orbiter Camera and Diviner data, we test Giordano Bruno and Pierazzo as possible launch craters for Oued Awlitis 001.     

Differential sensitivity of flounder (Platichthys flesus) in response to oestrogenic chemical exposure: an issue for design and interpretation of monitoring and research programmes

This study was conducted as an initial investigation of 'differential response' in one of the main sentinel organisms used for monitoring programmes in United Kingdom estuaries, the flounder Platichthys flesus. It has been hypothesised that monitoring using species with a wide geographical spread and limited migration, such as flounder, might result in the comparison of different genetic stocks and certainly of populations with differing early life stage contaminant exposure histories. Furthermore, it is probable that these pre-exposure and genetic differences could manifest themselves in an ability to respond differently to contaminant exposure, so-called 'differential response'. It is important that the extent and nature of this response is understood, if we want to be able to fully interpret the monitoring data from such programmes. During this study, flounder were collected from four separate sources; wild caught fish from the estuaries of the Rivers Alde, Mersey and Tyne, and farmed flounder from Port Erin Farm, Isle of Man. Under controlled laboratory conditions, groups of fish from each source were exposed to water-borne concentrations of the synthetic oestrogen ethynylestradiol (EE2) at a nominal concentration of 50 ng/l. Plasma was taken from each male fish after 6 and 10 days exposure and analysed for the presence of vitellogenin (VTG) using an ELISA technique. Significant levels of VTG induction were evident in fish from all sources after both 6 and 10 days exposure. Flounder from the Mersey were the only fish with significantly elevated initial background levels of VTG (day 0) and this appeared to be reflected in that these specimens showed the highest induction response after day 6. However, after day 10, fish from all other sites had a slightly higher mean VTG than those from the Mersey which showed significantly (p < 0.05) lower mean plasma VTG. It is suggested that other differential responses may have been masked by the use of a high dose of EE2 which produced maximum induction in nearly all fish. The findings of the study are discussed in terms of implications for further research into the differential response issue and how the initial plasma VTG figures contribute to a time-series from the Mersey, Tyne and Alde estuaries.     

Characteristics of tin-streaming channels on Dartmoor,UK

The remnants of former tin-streaming channels on the North Teign River, Dartmoor have been investigated using techniques adopted from palaeohydrology, sedimentology, and environmental chemistry. the pattern of multiple streaming channels in the lower reaches, and a single channel in the upper reaches coincides with a reduction of potential stream power from 250 Wm⁻² at a drainage area of 8.7 km². the streaming sections were engineered to maximize the efficiency to separate cassiterite (SnO₂) from its gravel matrix, and the palaeohydraulic properties of channels suggests that sorting was most efficient for the sand and fine gravel size ranges. This was confirmed when the residual tin content of streaming-sediments was assessed. Residual levels of tin were found only in the silt fraction (<63 μm).     

Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.     

Seismic stratigraphy and subsidence analysis of the southern Brazilian margin (Campos,Santos and Pelotas basins)

The Campos, Santos and Pelotas basins have been investigated in terms of 2D seismo-stratigraphy and subsidence. The processes controlling accommodation space (e.g. eustacy, subsidence, sediment input) and the evolution of the three basins are discussed. Depositional seismic sequences in the syn-rift Barremian to the drift Holocene basin fill have been identified. In addition, the subsidence/uplift history has been numerically modeled including (i) sediment flux, (ii) sedimentary basin framework, (iii) relation to plate-tectonic reconfigurations, and (iv) mechanism of crustal extension. Although the initial rift development of the three basins is very similar, basin architecture, sedimentary infill and distribution differ considerably during the syn-rift sag to the drift basin stages. After widespread late Aptian–early Albian salt and carbonate deposition, shelf retrogradation dominated in the Campos Basin, whereas shelf progradation occurred in the Santos Basin. In the Tertiary, these basin fill styles were reversed: since the Paleogene, shelf progradation in the Campos Basin contrasts with overall retrogradation in the Santos Basin. In contrast, long-term Cretaceous–Paleogene shelf retrogradation and intense Neogene progradation characterize the Pelotas Basin. Its specific basin fill and architecture mainly resulted from the absence of salt deposition and deformation. These temporally and spatially varying successions were controlled by specific long-term subsidence/uplift trends. Onshore and offshore tectonism in the Campos and Santos basins affected the sediment flux history, distribution of the main depocenters and occurrence of hydrocarbon stratigraphic–structural traps. This is highlighted by the exhumation and erosion of the Serra do Mar, Serra da Mantiqueira and Ponta Grossa Arch in the hinterland, as well as salt tectonics in the offshore domain. The Pelotas Basin was less affected by changes in structural regimes until the Eocene, when the Andean orogeny caused uplift of the source areas. Flexural loading largely controlled its development and potential hydrocarbon traps are mainly stratigraphic.     

Experimental formation of massive hydrate deposits from accumulation of CH4 gas bubbles within synthetic and natural sediments

In order for methane to be economically produced from the seafloor, prediction and detection of massive hydrate deposits will be necessary. In many cases, hydrate samples recovered from seafloor sediments appear as veins or nodules, suggesting that there are strong geologic controls on where hydrate is likely to accumulate. Experiments have been conducted examining massive hydrate accumulation from methane gas bubbles within natural and synthetic sediments in a large volume pressure vessel through temperature and pressure data, as well as visual observations. Observations of hydrate growth suggest that accumulation of gas bubbles within void spaces and at sediment interfaces likely results in the formation of massive hydrate deposits. Methane hydrate was first observed as a thin film forming at the gas/water interface of methane bubbles trapped within sediment void spaces. As bubbles accumulated, massive hydrate growth occurred. These experiments suggest that in systems containing free methane gas, bubble pathways and accumulation points likely control the location and habit of massive hydrate deposits.     

Methods for monitoring tidal flushing in large animal burrows in tropical mangrove swamps

The typically anaerobic nature of mangrove sediments provides significant challenges to the mangrove trees and biota inhabiting them. The burrowing activities and flow of water through the numerous and complex animal burrows perforating the sediments of mangroves have a major influence on the biogeochemistry of the sediments and are important to the enhancement of nutrient and oxygen exchange. Two new methods are presented for monitoring the tidal flushing of Sesarma messa and Alpheus cf macklay burrows in a Rhizophora stylosa mangrove forest – by measuring oxygen content of burrow water and by determining the change in fluorescence of a dye tracer through tidal inundation. A case study using the first of these showed oxygen consumption rates at the burrow wall deep within the burrow were found to be between 210 and 460 μmol O₂ m⁻² h⁻¹. The influx of oxygen during a flood tide was found to be significant and indicated that approximately 40% of the burrow water is flushed during a single tidal event. However, the high consumption rate of oxygen within the burrow resulted in the oxygen concentration remaining at or below one-third of the oxygen content of the flooding tidal water. A test application of the second method, using rhodamine dye as a tracer, indicated that the exchange of water between the burrow and the flooding tide was found to be in the order of 30% of the burrow volume. These new techniques provide a means to further study the nutrient exchange within these burrow systems and verify the initial findings that several tidal inundations are necessary to completely flush the burrows.     

MedFlux: Investigations of particle flux in the Twilight Zone

The MedFlux project was devised to determine and model relationships between organic matter and mineral ballasts of sinking particulate matter in the ocean. Specifically we investigated the ballast ratio hypothesis, tested various commonly used sampling and modeling techniques, and developed new technologies that would allow better characterization of particle biogeochemistry. Here we describe the rationale for the project, the biogeochemical provenance of the DYFAMED site, the international support structure, and highlights from the papers published here. Additional MedFlux papers can be accessed at the MedFlux web site (http://msrc.sunysb.edu/MedFlux/).     

High‐ to ultrahigh‐temperature metamorphism in the lower crust: An example resulting from Hikurangi Plateau collision and slab rollback in New Zealand

Lower crustal xenoliths erupted from an intraplate diatreme reveal that a portion of the New Zealand Gondwana margin experienced high‐temperature (HT) to ultrahigh‐temperature (UHT) granulite facies metamorphism just after flat slab subduction ceased at c. 110–105 Ma. P–T calculations for garnet–orthopyroxene‐bearing felsic granulite xenoliths indicate equilibration at ~815 to 910°C and 0.7 to 0.8 GPa, with garnet‐bearing mafic granulite xenoliths yielding at least 900°C. Supporting evidence for the attainment of HT and UHT conditions in felsic granulite comes from re‐integration of exsolution in feldspar (~900–950°C at 0.8 GPa), Ti‐in‐zircon thermometry on Y‐depleted overgrowths on detrital zircon grains (932°C ± 24°C at aTiO₂ = 0.8 ± 0.2), and correlation of observed assemblages and mineral compositions with thermodynamic modelling results (≥850°C at 0.7 to 0.8 GPa). The thin zircon overgrowths, which were mainly targeted by drilling through the cores of grains, yield a U–Pb pooled age of 91.7 ± 2.0 Ma. The cause of Late Cretaceous HT‐UHT metamorphism on the Zealandia Gondwana margin is attributed to collision and partial subduction of the buoyant oceanic Hikurangi Plateau in the Early Cretaceous. The halt of subduction caused the fore‐running shallowly dipping slab to rollback towards the trench position and permitted the upper mantle to rapidly increase the geothermal gradient through the base of the extending (former) accretionary prism. This sequence of events provides a mechanism for achieving regional HT–UHT conditions in the lower crust with little or no sign of this event at the surface.     

A generalized conditional intensity measure approach and holistic ground‐motion selection

A generalized conditional intensity measure (GCIM) approach is proposed for use in the holistic selection of ground motions for any form of seismic response analysis. The essence of the method is the construction of the multivariate distribution of any set of ground‐motion intensity measures conditioned on the occurrence of a specific ground‐motion intensity measure (commonly obtained from probabilistic seismic hazard analysis). The approach therefore allows any number of ground‐motion intensity measures identified as important in a particular seismic response problem to be considered. A holistic method of ground‐motion selection is also proposed based on the statistical comparison, for each intensity measure, of the empirical distribution of the ground‐motion suite with the ‘target’ GCIM distribution. A simple procedure to estimate the magnitude of potential bias in the results of seismic response analyses when the ground‐motion suite does not conform to the GCIM distribution is also demonstrated. The combination of these three features of the approach make it entirely holistic in that: any level of complexity in ground‐motion selection for any seismic response analysis can be exercised; users explicitly understand the simplifications made in the selected suite of ground motions; and an approximate estimate of any bias associated with such simplifications is obtained. Copyright © 2010 John Wiley & Sons, Ltd.