Subglacial drainage system structure and morphology of Brewster Glacier,New Zealand

A global positioning system and ground penetrating radar surveys is used to produce digital elevation models of the surface and bed of Brewster Glacier. These are used to derive maps of subglacial hydraulic potential and drainage system structure using three different assumptions about the subglacial water pressure (P_w): (i) P_w = ice overburden; (ii) P_w = half ice overburden; (iii) P_w = atmospheric. Additionally, 16 dye‐tracing experiments at 12 locations were performed through a summer melt season. Dye return curve shape, together with calculations of transit velocity, dispersivity and storage, are used to infer the likely morphology of the subglacial drainage system. Taken together, the data indicate that the glacier is underlain by a channelised but hydraulically inefficient drainage system in the early summer in which water pressures are close to ice overburden. By mid‐summer, water pressures are closer to half‐ice overburden and the channelised drainage system is more hydraulically efficient. Surface streams that enter the glacier close to the location of major subglacial drainage pathways are routed quickly to the channels and then to the glacier snout. Streams that enter the glacier further away from the drainage pathways are routed slowly to the channels and then to the snout because they first flow through a distributed drainage system. Copyright © 2008 John Wiley & Sons, Ltd.     

Shock-induced temperatures of MgO

Shock-compressed MgO radiates thermally at temperatures between 2900 and 3700 K in the 170–200 GPa pressure range. A simple energy-transport model of the shocked-MgO-targets distinguishes between different shock-induced radiation sources in these targets and provides estimates of spectral absorption-coefficients, α _ΛMgO, for shocked MgO (e.g. at 203 GPa, α _ΛMgO˜ 630, 7500, 4200 and 3800 m⁻¹, at 450, 600, 750 and 900 nm, respectively). The experimentally inferred temperatures of the shock-compressed states of MgO are consistent with temperatures calculated for MgO assuming that (1) it deforms as an elastic fluid, (2) has a Dulong-Petit value for specific heat at constant volume in its shocked state, and (3) undergoes no phase transformation below 200 GPa.     

Characterization of halophiles in natural MgSO4 salts and laboratory enrichment samples: Astrobiological implications for Mars

The presence of sulfate salts and limited subsurface water (ice) on Mars suggests that any liquid water on Mars today will occur as (magnesium) sulfate-rich brines in regions containing sources of magnesium and sulfur. The Basque Lakes of British Columbia, Canada, represent a hypersaline terrestrial analogue site, which possesses chemical and physical properties similar to those observed on Mars. The Basque Lakes also contain diverse halophilic organisms representing all three Kingdoms of life, growing in surface and near-subsurface environments. Of interest from an astrobiological perspective, crushed magnesium sulfate samples that were analyzed using a modified Lowry protein assay contained biomass in every crystal inspected, with biomass values from 0.078 to 4.21 mg_biomass/g_salt; average=0.74±0.7 mg_biomass/g_salt. Bacteria and Archaea cells were easily observed even in low-biomass samples using light microscopy, and bacteria trapped within magnesium sulfate crystals were observed using confocal microscopy. Regions within the salt also contained bacterial pigments, e.g., carotenoids, which were separate from the cells, indicating that cell lysis might have occurred during entrapment within the salt matrix. These biosignatures, cells, and any ‘soluble’ organic constituents were primarily found trapped within fluid inclusions or fluid-filled void spaces between intergrown crystals. Diffuse reflectance infrared Fourier transform spectroscopy (reflectance IR) analysis of enrichment cultures, containing cyanobacteria, Archaea, or dissimilatory sulfate-reducing bacteria, highlighted molecular biosignature features between 550-1650 and 2400-3000 cm⁻¹. Spectra from natural salts demonstrated that we can detect biomass within salt crystals using the most sensitive biosignatures, which are the 1530-1570 cm⁻¹, C-N, N-H, -COOH absorptions and the 1030-1050 cm⁻¹ C-OH, C-N, PO₄³⁻ bond features. The lowest detection limit for a biosignature absorption feature using reflectance IR was with a natural sample that possessed 0.78 mg_biomass/g_salt. In a model cell, i.e., a 0.5 by 1 μm bacillus, this biomass value corresponds to approximately 7.8×10⁸ cells/g_salt. Based on its ability to detect biomass entrapped within natural sulfate salts, reflectance IR may make an effective remote-sensing tool for finding enrichments of organic carbon within outcrops and surficial sedimentary deposits on Mars.     

Shear stress partitioning in large patches of roughness in the atmospheric inertial sublayer

Drag partition measurements were made in the atmospheric inertial sublayer for six roughness configurations made up of solid elements in staggered arrays of different roughness densities. The roughness was in the form of a patch within a large open area and in the shape of an equilateral triangle with 60 m long sides. Measurements were obtained of the total shear stress (τ) acting on the surfaces, the surface shear stress on the ground between the elements (τ_S) and the drag force on the elements for each roughness array. The measurements indicated that τ_S quickly reduced near the leading edge of the roughness compared with τ, and a τ_S minimum occurs at a normalized distance (x/h, where h is element height) of (downwind of the roughness leading edge is negative), then recovers to a relatively stable value. The location of the minimum appears to scale with element height and not roughness density. The force on the elements decreases exponentially with normalized downwind distance and this rate of change scales with the roughness density, with the rate of change increasing as roughness density increases. Average τ_S : τ values for the six roughness surfaces scale predictably as a function of roughness density and in accordance with a shear stress partitioning model. The shear stress partitioning model performed very well in predicting the amount of surface shear stress, given knowledge of the stated input parameters for these patches of roughness. As the shear stress partitioning relationship within the roughness appears to come into equilibrium faster for smaller roughness element sizes it would also appear the shear stress partitioning model can be applied with confidence for smaller patches of smaller roughness elements than those used in this experiment.     

Reconstruction of contaminant trends in a salt wedge estuary with sediment cores dated using a multiple proxy approach

The Taunton River is a partially mixed tidal estuary in southeastern Massachusetts (USA) which has received significant contaminant inputs, yet little information exists on the history of discharge and the subsequent fate of these contaminants. Three sediment cores taken along a transect were analyzed, reconstructing the spatial and temporal trends of pollution in the estuary. A combination of radiometric dating, contaminant markers, and storm layers from major hurricanes were used to establish age models and sedimentation rates. Age estimates obtained from the different dating methods compared well, establishing an accurate history of contaminant release to the estuary. Polycyclic aromatic hydrocarbons (PAHs) were present in one core at depths corresponding to the early 1860s, earlier than previously established dates of introduction. Temporal and spatial trends of Cr, Cu, Hg and Pb indicated multiple sources of varying input to the river. Polychlorinated biphenyls (PCBs) were present in each of the cores from the 1930s onward, with elevated levels still present in surficial sediments at several sites. A unique organic compound, Topanol, which was produced locally was used as a tracer to track contaminant transport in the river. Tracer data indicates that contaminants are still being transported and deposited to surficial sediments at high concentrations well after their discharge. This reconstruction demonstrates the utility of using multiple dating proxies where often the sole use of radiometric dating techniques is not an option and provides insights into the fate of contaminants discharged decades ago but continue to represent environmental risks.