Hydrogeologic and hydraulic characterization of aquifer and nonaquifer layers in a lateritic terrain (West Bengal,India)

The hydrogeologic and hydraulic characteristics of a lateritic terrain in West Bengal, India, were investigated. Test drilling was conducted at ten sites and grain-size distribution curves (GSDCs) were prepared for 275 geologic samples. Performance evaluation of eight grain-size-analysis (GSA) methods was carried out to estimate the hydraulic conductivity (K) of subsurface formations. Finally, the GSA results were validated against pumping-test data. The GSDCs indicated that shallow aquifer layers are coarser than the deeper aquifer layers (uniformity coefficient 0.19–11.4). Stratigraphy analysis revealed that both shallow and deep aquifers of varying thickness exist at depths 9–40 and 40–79 m, respectively. The mean K estimates by the GSA methods are 3.62–292.86 m/day for shallow aquifer layers and 0.97–209.93 m/day for the deeper aquifer layers, suggesting significant aquifer heterogeneity. Pumping-test data indicated that the deeper aquifers are leaky confined with transmissivity 122.69–693.79 m²/day, storage coefficient 1.01?×?10^?7–2.13?×?10^?4 and leakance 2.01?×?10^?7–34.56?×?10^?2 day^?1. Although the K values yielded by the GSA methods are generally larger than those obtained from the pumping tests, the Slichter, Harleman and US Bureau Reclamation (USBR) GSA methods yielded reasonable values at most of the sites (1–3 times higher than K estimates by the pumping-test method). In conclusion, more reliable aquifers exist at deeper depths that can be tapped for dependable water supply. GSA methods such as Slichter, Harleman and USBR can be used for the preliminary assessment of K in lateritic terrains in the absence of reliable field methods.     

Significance of contrast in the early stages of the structural history of the Delhi and the pre-Delhi rock groups in the Proterozoic of Rajasthan, western India

Structures of four generations are decipherable both in the pre-Delhi rocks of central Rajasthan, and in the Delhi rocks of Khetri in northeastern Rajasthan and around Todgarh in central Rajasthan. There is a remarkable identity in the later phases of the deformational history of the two groups, with gravity-induced structures followed by conjugate folds due to longitudinal shortening (N-S in northeastern Rajasthan and NE-SW in central Rajasthan). The earlier stages of the structural history of the two groups are, however, significantly different. The E-W-trending reclined folds of the first generation in the pre-Delhi rocks are absent in the Delhi rocks throughout Rajasthan. The NNE- to NE-trending folds of the second generation in the pre-Delhi groups are upright, whereas these structures in the Delhi rocks are of two phases—recumbent folds, followed by coaxial upright folds. The folds of the first and the second phases in the Delhi rocks plunge gently NE or SW where they are not affected by subsequent deformations. But the NE-trending folds in the pre-Delhi rocks show an extreme variation in axial plunge from horizontal to vertical, even where they are unaffected by later movements. Evidence has been adduced to suggest that these differences in the earlier phases of the structural evolution of the two groups are due to an angular unconformity between the Delhi and the pre-Delhi rocks.     

Radioactive occurrence in sediments of Cenozoic age near Bandha village,Jaisalmer district,Rajasthan

The radioactivity is dependent on the isotope and their concentration in the mineral such as potassium (K), uranium (U) and thorium (Th). In this paper the presence of a 3 to 5 m thick uranium and thorium bearing sediment of Cenozoic age is reported above Goru Formation of Jaisalmer basin. Gamma ray log response of Well-1 which falls under the study area has marked with very high GR (gamma ray) readings ranging from 350-1488 API coupled with high uranium and thorium content from spectral gamma ray log ranging from 92-178 ppm and 60-80 ppm respectively at the depth of 50 m from ground surface (-110m above MSL). Further studies are required to delineate the lateral thickness variation for mining purpose which may be a radioactive source.     

Geoinformatic Modeling of Groundwater Resource Mapping of Shear Zone Regions- A Case Study on Attur Valley,Tamil Nadu,India

The general tendency of mapping groundwater resource using remote sensing and Geographic Information System (GIS) techniques involve assigning higher weightage to geomorphology. But this cannot be used as a thumb rule everywhere, especially an area where many ductile and brittle zones are prevalent. The influence of texture and structure of sheared rocks might play a control over retaining and permitting groundwater to flow. Attur valley is characterized by the presence of many shear zones and faults and hence the rocks are highly fissile within the shear zones. The present study tries to establish a new ranking and weightage scheme and hence a new spatial model for groundwater resource mapping in shear zone area like Attur Valley. This spatial model can be verified with field data such as water level data, pump test and resistivity data.     

Geochemical and isotope hydrological characterisation of geothermal resources at Godavari valley,India

Thermal waters at the Godavari valley geothermal field are located in the Khammam district of the Telangana state, India. The study area consists of several thermal water manifestations having temperature in the range 36–76 °C scattered over an area of ~35 km². The thermal waters are Na–HCO₃ type with moderate silica and TDS concentrations. In the present study, detailed geochemical (major and trace elements) and isotope hydrological investigations are carried out to understand the hydrogeochemical evolution of these thermal waters. Correlation analysis and principal component analysis (PCA) are performed to classify the thermal waters and to identify the different geochemical processes controlling the thermal water geochemistry. From correlation matrix, it is seen that TDS and EC of the thermal springs are mainly controlled by HCO₃ and Na ions. In PCA, thermal waters are grouped into two distinct clusters. One cluster represents thermal waters from deeper aquifer and other one from shallow aquifer. Lithium and boron concentrations are found to be similar followed by rubidium and caesium concentrations. Different ternary plots reveal rock–water interaction to be the dominant mechanism for controlling trace element concentrations. Stable isotopes (δ¹⁸O, δ²H) data indicate the meteoric origin of the thermal waters with no appreciable oxygen-18 shift. The low tritium values of the samples originating from deeper aquifer reveal the long residence time (>50 years) of the recharging waters. XRD results of the drill core samples show that quartz constitutes the major mineral phase, whereas kaolinite, dolomite, microcline, calcite, mica, etc. are present as minor constituents. Quartz geothermometer suggests a reservoir temperature of 100 ± 20 °C which is in good agreement with the values obtained from K–Mg and Mg-corrected K–Mg–Ca geothermometers.     

Study of dynamic behaviour of recession curves

Since Brutsaert and Neiber (1977), recession curves are widely used to analyse subsurface systems of river basins by expressing ? dQ/dt as a function of Q, which typically take a power law form: ? dQ/dt = kQ^α, where Q is the discharge at a basin outlet at time t. Traditionally recession flows are modelled by single reservoir models that assume a unique relationship between ? dQ/dt and Q for a basin. However, recent observations indicate that ? dQ/dt ‐ Q relationship of a basin varies greatly across recession events, indicating the limitation of such models. In this study, the dynamic relationship between ? dQ/dt and Q of a basin is investigated through the geomorphological recession flow model which models recession flows by considering the temporal evolution of its active drainage network (the part of the stream network of the basin draining water at time t). Two primary factors responsible for the dynamic relationship are identified: (i) degree of aquifer recharge (ii) spatial variation of rainfall. Degree of aquifer recharge, which is likely to be controlled by (effective) rainfall patterns, influences the power law coefficient, k. It is found that k has correlation with past average streamflow, which confirms the notion that dynamic ? dQ/dt ‐ Q relationship is caused by the degree of aquifer recharge. Spatial variation of rainfall is found to have control on both the exponent, α, and the power law coefficient, k. It is noticed that that even with same α and k, recession curves can be different, possibly due to their different (recession) peak values. This may also happen due to spatial variation of rainfall. Copyright © 2012 John Wiley & Sons, Ltd.     

Classification of slopes and prediction of factor of safety using differential evolution neural networks

Slope stability analysis is one of the most important problems in geotechnical engineering. The development in slope stability analysis has followed the development in computational geotechnical engineering. This paper discusses the application of different recently developed artificial neural network models to slope stability analysis based on the actual slope failure database available in the literature. Different ANN models are developed to classify the slope as stable or unstable (failed) and to predict the factor of safety. The developed ANN model is found to be efficient compared with other methods like support vector machine and genetic programming available in literature. Prediction models are presented based on the developed ANN model parameters. Different sensitivity analyses are made to identify the important input parameters.     

Characterization of hydrocarbon-bearing fluid inclusion in sandstones of Jaisalmer basin, Rajasthan: A preliminary approach

The quartz grains from the sandstone of Jaisalmer, Pariwar and Goru Formations of the Jaisalmer basin, Rajasthan, India, exhibits a variety of primary and secondary fluid inclusions. Most of them are hydrocarbon bearing fluid inclusions. Laser Raman studies indicate that the primary fluid inclusions were mostly having aliphatic hydrocarbons with lower degree of maturity, while the secondary fluid inclusions were generally with aliphatic as well as aromatic hydrocarbons with higher degree of maturity. This inference was consistent with their fluorescence characteristics. The homogenization temperatures of primary monophase CH₄ rich fluid inclusions varied from ?80°C to ?100°C, whereas the primary biphase fluid inclusions (CH₄-CO₂) homogenized between +80°C and +150°C. The secondary petroleum rich monophase fluid inclusions were having homogenization temperature between ?80°C to ?90°C, whereas the secondary biphase fluid inclusions homogenized between +130°C and +180°C. Most of the secondary biphase fluid inclusions were having the mixtures of H₂O-CO₂-NaCl, and were identified on the basis clathrate formation and they got homogenized between +140°C and + 250 °C. The three past events of migration of petroleum inferred in the host rock which were marked by the presence of characteristic secondary fluid inclusions. They were identified on the basis of cross-cutting relationships of different trails of fluid inclusions in the quartz. The cement generation in the basin might have been occurred in two stages as per the fluid inclusion petrography.