Fresnel zone plate telescopes for X-ray imaging I: experiments with a quasi-parallel beam

Combination of Fresnel Zone Plates (FZP) can make an excellent telescope for imaging in X-rays. We present here the results of our experiments with several pairs of tungsten made Fresnel Zone plates in presence of an X-ray source kept at a distance of about 45 ft. The quasi-parallel beam allowed us to study sources placed on the axis as well as off the axis of the telescope. We present theoretical study of the fringe patterns produced by the zone plates in presence of a quasi-parallel source. We compare the patterns obtained from experiments with those obtained by our Monte-Carlo simulations. The images are also reconstructed by deconvolution from both the patterns. We compare the performance of such a telescope with other X-ray imaging devices used in space-astronomy.     

Numerical modeling of flow patterns around subducting slabs in a viscoelastic medium and its implications in the lithospheric stress analysis

This paper presents results obtained from numerical model experiments to show different patterns of mantle flow produced by lithospheric movement in subduction zones. Using finite element models, based on Maxwell rheology (relaxation time ∼ 10¹¹S), we performed three types of experiments: Type 1, Type 2 and Type 3. In Type 1 experiments, the lithospheric slab subducts into the mantle by translational movement, maintaining a constant subduction angle. The experimental results show that the flow perturbations occur in the form of vortices in the mantle wedge, irrespective of subduction rate and angle. The mantle wedge vortex is coupled with another vortex below the subducting plate, which tends to be more conspicuous with decreasing subduction rate. Type 2 experiments take into account a flexural deformation of the plate, and reveal its effect on the flow patterns. The flexural motion induces a flow in the form of spiral pattern at the slab edge. Density-controlled lithospheric flexural motion produces a secondary flow convergence zone beneath the overriding plate. In many convergent zones the subducting lithospheric plate undergoes detachment, and moves down into the mantle freely. Type 3 experiments demonstrate flow perturbations resulting from such slab detachments. Using three-dimensional models we analyze lithospheric stresses in convergent zone, and map the belts of horizontal compression and tension as a function of subduction angle.     

A comparative study of slip velocity models for the prediction of performance of floatex density separator

The separation features of the floatex density separator (FDS) are investigated through experimental and computational approaches. It has been shown that the performance of the FDS can be predicted reasonably well using a slip velocity model and steady-state mass balance equations. The approach for the formulation of the slip velocity model makes a difference in the prediction of FDS performance. The computed data from four different slip velocity models have been compared and contrasted with the experimental observations. It has been shown that a slip velocity model based on the modified Richardson and Zaki equation, in which the dissipative pressure gradient is considered to be the primary driving force for separation, predicts the performance more accurately than the other three. A deslimed feed is recommended for better performance of the FDS.     

Textural identification of basaltic rock mass using image processing and neural network

A new approach to identify the texture based on image processing of thin sections of different basalt rock samples is proposed here. This methodology uses RGB or grayscale image of thin section of rock sample as an input and extracts 27 numerical parameters. A multilayer perceptron neural network takes as input these parameters and provides, as output, the estimated class of texture of rock. For this purpose, we have use 300 different thin sections and extract 27 parameters from each one to train the neural network, which identifies the texture of input image according to previously defined classification. To test the methodology, 90 images (30 in each section) from different thin sections of different areas are used. This methodology has shown 92.22% accuracy to automatically identify the textures of basaltic rock using digitized image of thin sections of 140 rock samples. Therefore, present technique is further promising in geosciences and can be used to identify the texture of rock fast and accurate.     

Search for orbital motion of the pulsar 4U 1626–67: Candidate for a neutron star with a supernova fall-back accretion disk

We report here results from a new search for orbital motion of the accretion powered X-ray pulsar 4U 1626–67 using two different analysis techniques. X-ray light curve obtained with the Proportional Counter Array of the Rossi X-ray Timing Explorer during a long observation carried out in February 1996, was used in this work. The spin period and the local period derivative were first determined from the broad 2–60 keV energy band light curve and these were used for all subsequent timing analysis. In the first technique, the orbital phase dependent pulse arrival times were determined for different trial orbital periods in the range of 500 to 10,000 s. We have determined a 3σ upper limit of 13 lt-ms on the projected semimajor axis of the orbit of the neutron star for most of the orbital period range, while in some narrow orbital period ranges, covering about 10% of the total orbital period range, it is 20lt-ms. In the second method, we have measured the pulse arrival times at intervals of 100 s over the entire duration of the observation. The pulse arrival time data were used to put an upper limit on any periodic arrival time delay using the Lomb-Scargle periodogram. We have obtained a similar upper limit of 10 lt-ms using the second method over the orbital period range of 500–10,000 s. This puts very stringent upper limits for the mass of the compact object except for the unlikely case of a complete face-on orientation of the binary system with respect to our line-of-sight. In the light of this measurement and the earlier reports, we discuss the possibility of this system being a neutron star with a supernovae fall-back accretion disk.     

On the aftershock sequence of a 4.6 mb earthquake of the Garhwal Himalaya

Locally recorded data for eighteen aftershocks of a magnitude(m_b) 4.6 earthquake occurring near Ukhimath in the Garhwal Himalaya were analysed. A master event technique was adopted to locate seventeen individual aftershock hypocentres relative to the hypocentre of the eighteenth aftershock chosen as the master event. The aftershock epicentres define an approximately 30 km² rupture zone commensurate with the magnitude of the earthquake. The distribution of epicentres within this zone and the limited amount of first motion data support the view that a group of parallel, sub-vertical, sinistral strike-slip faults oriented N46°, transverse to the regional NW-SE trend of the Garhwal Himalaya, was involved in this seismic episode. Since the estimated focal depth range for aftershocks of this sequence is 3–14 km, we infer that this transverse fault zone extends through the upper crustal layer to a depth of 14 km at least.     

Use of terain factors in evaluation and classifications of Darjeeling district,West bengal

The use of LANDSAT data has proved to be a major aid to semi-macroscale geomorphic mapping of terrain. The geomorphological contribution to the classifications of the Darjeeling District, using quantitative measures of selected terrain factors apart from conventional landsystem mapping on MSS-imagery, has been found to be more useful means of terrain evaluation as well as its proper development in resource management. Qualitative estimates of terrain factors, viz. altitude, relief, slope and dissection nature, drainage texture and pattern, valley forms and crest types coupled with landcover types etc. are considered in preparation of landsystem map of the area. Because of its subjective biasness, an alternative approach, the parametric method of terrain classification is carried out to analyse the spatial distributions of quantitative parameters on terrain factors viz. maximum altitude, average altitude, relative relief, average slope, dissection index, drainage density and ruggedness index etc. and to combine the resulting patterns into compositive generalizations. The composite map thus prepared reveals six terrain units of distinct morphological classes and are sufficiently equatable to certain physical conditions of terrain.     

Precambrian tectonic evolution of eastern India: A model of converging microplates

The Precambrian formations of the Singhbhum and Chotanagpur region of the Indian Peninsular Shield are tectonically classified and their implications in the context of plate tectonics are reviewed on the basis of the stratigraphic, structural, petrologic, geochemical, geophysical and geochronologic data that have accumulated through extensive research in the region in recent years. It is shown that the essential elements in tectonic settings, geological facies and structural and metamorphic characters of the Singhbhum orogenic belt and the reactivated Chotanagpur plateau are elegantly interpretable in terms of interaction of two converging microplates, named here as the Singhbhum and Chotanagpur plates. A detailed correlation of the tectonic evolution with the different stages of a proposed model of plate motions is attempted in the paper.The study reveals three cycles of plate motions with intervening periods of “quiescence”. During the first cycle (2000-1600 Ma), the Singhbhum plate moved northward and collided with the Chotanagpur plate: this led to the tectonic emplacement of the Dalma ophiolite belt and development of the F₁ folds and thrusts and M₁ metamorphism. During the second cycle (1550-1170 Ma), a clockwise rotation of the Singhbhum plate towards the NE generated the F₂ folds and a transcurrent sinistral shear zone. Obduction of the continental lithosphere of this plate occurred during the third cycle (1000-850 Ma) as a result of its continued impingement on the Chotanagpur plate in the NNW direction; this is documented by the evolution of the F₃ folds, M₃ metamorphism and the Singhbhum thrust zone. The “quiescence” periods allowed time for isostatic readjustments, viz., uplifts, intrusions of basic dyke swarms, erosion and paralic sedimentation.     

Conservation of biodiversity of the coastal resources of Sundarbans,Northeast India: an integrated approach through environmental education

The Indian Sundarbans, a diversified coastal wetland on the southern fringe of the State of West Bengal, harbors a luxuriant biodiversity and acts as a potential refuge of living marine resources. Girdled with thick mangrove foliage, this estuarine delta system offers an excellent nursery ground for most of the brackishwater finfish and shellfish. Since supply of hatchery-produced tiger prawn seed (Penaeus monodon) is highly inadequate in West Bengal, the aquaculture farms of this region largely depend on the supply from natural resources. Being motivated by a regular cash income, the majority of coastal people from Sundarbans have adopted prawn seed collection as their profession almost throughout the year as an important source of earning. The users are neither trained nor guided at any stage from collection to marketing and are fully dependent on traditional methods. They first sort out the tiger prawn seeds (mainly the postlarval stage PL 20) accounting only 0.25-0.27% of the total catch and thereafter the major portion of the haul are thrown away on the beach flats or the tidal mudflats. This wasted by-catch contains the juveniles of economic and uneconomic varieties of finfish and shellfish along with a bulk of holoplankters and meroplankters (non-target species). This practice causes several ecological and occupational consequences, namely, (i) the huge destruction of the pelagic biota that can lead to severe stock depletion as well as hamper the energy transference through the marine ecosystem food webs; (ii) constant dragging of nets along the coast and tidal creeks paves the way for soil erosion, uprooting the mangrove seedlings and saltmarsh vegetation; (iii) the water quality is deteriorating in the catchment areas due to mud erosion and (iv) due to constant contact with the seawater, the collectors are affected with waterborne diseases, skin infections, reproductive tract disease in women and many other contagious diseases.This paper, in addition to identifying the challenge to environmental quality and resource abundance, emphasizes the need for grass-root public education so that local people come to understand, support and implement sustainable resource conservation and environmental protection activities now and in the future. As a follow-up course of action, the authors have initiated a general awareness program for developing consciousness among the coastal people regarding proper use of natural resources. Initiatives are taken for educating coastal people by holding workshops and seminars with the use of educational resource materials. Exclusive awareness camps and grass root level training for coastal people are also being proposed as a future course of action by means of exhibitions, audiovisuals etc. It is proposed that local government bodies come forward to mitigate this problem with scientific and rational approaches and to take proper actions towards conservation.