燕山中晚期的中国东部高原:埃达克岩的启示

中国东部燕山期岩浆岩广泛发育,其中有一类具埃达克岩的特征,并根据埃达克岩的成因提出中国东部在燕山中晚期可能为一个高原。本文就中国东部高原的范围、高原存在的依据、高原隆升和减薄的机制进行了讨论,指出中国东部高原大规模的抬升事件大约发生在中-晚侏罗世期间,在早白垩世之后塌陷。高原的隆升与板块消减作用无关,是陆内事件的产物。高原的塌陷是下地壳拆沉作用的结果。拆沉作用不仅可以解释高原的减薄,而且可以解释新生代玄武岩喷发和中国东部盆地的形成。     

Well placement optimization subject to realistic field development constraints

This work considers the well placement problem in reservoir management and field development optimization. In particular, it emphasizes embedding realistic and practical constraints into a mathematical optimization formulation. Such constraints are a prerequisite for the wider use of mathematical optimization techniques in well placement problems, since constraints are a way to incorporate reservoir engineering knowledge into the problem formulation. There are important design limitations that are used by the field development team when treating the well placement problem, and these limitations need to be articulated and eventually formalized within the problem before conducting the search for optimal well placements. In addition, these design limitations may be explicit or implicit. In this work, various design limitations pertaining to well locations have been developed in close collaboration with a field operator on the Norwegian Continental Shelf. Moreover, this work focuses on developing constraint-handling capability to enforce these various considerations during optimization. In particular, the Particle Swarm Optimization (PSO) algorithm is applied to optimize for the well locations, and various practical well placement constraints are incorporated into the PSO algorithm using two different constraint-handling techniques: a decoder procedure and the penalty method. The decoder procedure maps the feasible search space onto a cube and has the advantage of not requiring parameter tuning. The penalty method converts the constrained optimization problem into an unconstrained one by introducing an additional term, which is called a penalty function, to the objective function. In contrast to the penalty method, only feasible solutions are evaluated in the decoder method. Through numerical simulations, a comparison between the penalty method and the decoder technique is performed for two cases. We show that the decoder technique can easily be implemented for the well placement problem, and furthermore, that it performs better than the penalty method in most of the cases.     

Comparison of two drought indices in studying regional meteorological drought events in China

The composite-drought index (CI), improved weighted average of precipitation index (IWAP), and the objective identification technique for regional extreme events (OITREE) were employed to detect China's regional meteorological drought events (CRMDEs) during 1961–2010. Compared with existing references, CI and IWAP both showed strong ability in identifying CRMDEs. Generally, the results of CI and IWAP were consistent, especially for extreme and severe CRMDEs. During 1961–2010, although the frequencies of extreme and severe CRMDEs based on CI and IWAP both showed weak decreasing trends, the two mean-integrated indices both showed increasing but not significant trends. However, the results of IWAP were more reasonable than CI’s in two aspects. Firstly, the monthly frequency of extreme and severe CRMDEs based on IWAP showed a clear seasonal variation, which coincided with the seasonal variation of the East Asian monsoon over central–eastern China, whereas the frequency based on CI presented a much weaker seasonal variation. Secondly, the two sets of results were sometimes inconsistent with respect to the start and end times of a CRMDE, and CRMDEs based on CI generally showed two unreasonable phenomena: (1) under non-drought conditions, a severe drought stage could suddenly occur in a large area; and (2) during the following period, drought could alleviate gradually in cases of non-precipitation. Comparative analysis suggested that the IWAP drought index possesses obvious advantages in detecting and monitoring regional drought events.     

Geological Characteristics and Stability Evaluation of Wanjia Middle School Slope in Wenchuan Earthquake Area

To investigate the formation mechanism and the stability of Wanjia middle school slope in Wenchuan Earthquake Area, the macroscopic geological characteristics and the failure process of the landslide are researched by engineering geology analysis method, limit equilibrium method, and finit element method. The results show that after the Wenchuan Earthquake, retaining walls, houses and other infrastructure on the foot of Wanjia middle school slope were severely destroyed, 10 cm wide tension fracture appeared at the trailing edge of the slope. Wanjia middle school slope is a type of medium-sized soil landslide. The area of the deformation body is about 19,314 m², the total volume of the deformation body is about 23 × 10⁴ m³. There may be two potential sliding surfaces in the unstable slope: shallow and deep landslide. The analysis results of the limit equilibrium method and the finite element method show that: under dead weight, dead weight + rainstorm, dead weight + earthquake conditions, the plastic zone occurs mainly at the middle part or the trailing edge of the slope, and it doesn’t fully cut through the deep landslide body, so the deep landslide is stable. However, under rainstorm or earthquake conditions, the plastic zone almost completely cut thorough the shallow landslide body, it shows that the shallow landslide is in the understable–basic stable state. It is found that the results of finite element method is concordant with the results of the limit equilibrium method (F _s = 1.06–1.29, the shallow landslide is in the basic stable–stable state). The calculation results show that shallow landslides are likely to occur in Wanjia middle school slope during a rainstorm or an earthquake, so monitoring and control of the slope should be strengthened. The shallow landslide should be managed by some measures, such as anti slide pile retaining structures and drainage works, and the dangerous rock bodies on the slope surface should be cleaned up.     

Recurrent mesoproterozoic continental magmatism in South-Central Norway

We report U–Pb dates and Lu–Hf isotope data, obtained by LAM-ICPMS, for zircons from metamorphic rocks of the Setesdalen valley, situated in the Telemark block south of the classic Telemark region of southern Norway. The samples include infracrustal rocks from the metamorphic basement, metaigneous rocks and metasediments from the Byglandsfjorden supracrustal cover sequence, and metaigneous rocks which intruded the whole succession. The main crustal evolution took place from 1,550–1,020 Ma, beginning with the emplacement of juvenile tonalitic melts; the contribution of older crustal material increased with time. Around 1,320 Ma, further addition of juvenile material occurred, involving both mafic and felsic melts, metamorphism and deformation. Acid magmas with high FeO*/MgO were intruded at 1,215 Ma, coinciding with underplating elsewhere in South Norway. The period starting at 1,215 Ma is represented by supracrustal rocks, principally metarhyolites with minor mafic material and immature sediments of the Byglandsfjorden Group. The crust generation processes ended with the intrusion of diorites and granodiorites at 1,030 Ma, late in the Sveconorwegian orogeny. Regional processes of metamorphism and deformation (around 1,290 and 1,000 Ma) can be related to the assembly of Rodinia. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Broad search for unstable resonant orbits in the planar circular restricted three-body problem

Unstable resonant orbits in the circular restricted three-body problem have increasingly been used for trajectory design using optimization and invariant manifold techniques. In this study, several methods for computing these unstable resonant orbits are explored including grid searches, flyby maps, and continuation. Families of orbits are computed focusing on orbits with multiple loops near the secondary in the Jupiter–Europa system, and their characteristics are explored. Different parameters such as period and stability are examined for each set of resonant orbits, and the continuation of several specific orbits is explored in more detail.     

Spatial decision support applications based on three-dimensional city models

The basic mathematic models, such as the statistic model, the time-serial model, the spatial dynamic model etc., and some typical analysis methods based on 3DCM are proposed and discussed. A few typical spatial decision making methods integrating the spatial analysis and the basic mathematical models are also introduced, e.g. visual impact assessment, dispersion of noise immissions, base station plan for wireless communication. In addition, a new idea of expectation of further applications and add-in-value service of 3DCM is promoted. As an example, the sunshine analysis is studied and some helpful conclusions are drawn.     

Morphologies and emplacement mechanisms of the lava flows of the Faroe Islands Basalt Group,Faroe Islands,NE Atlantic Ocean

The Palaeogene Faroe Islands Basalt Group (FIBG) comprises three eruptive sequences or formations, all emplaced into a subaerial environment during the development of the extensive continental flood basalt province that stretches from East Greenland through the Faroe Islands and into the Faroe-Shetland Basin. The Beinisvørð Formation, having a tabular-classic facies architecture, is composed of a sequence of simple flows each comprising a single sheet lobe. The Beinisvørð Formation is overlain by the distinctly contrasting Malinstindur Formation that has a compound-braided facies architecture. The Enni Formation occurs at the top of the sequence and consists of a mixture of simple and compound flows with tabular-classic and compound-braided facies architectures, respectively. Surface and internal characteristics of the sheet lobes of the Beinisvørð and Enni formations indicate emplacement through inflation, which is more obvious for the tube-fed compound flows of the Malinstindur and Enni formations. The difference between the simple and compound flow sequences of the FIBG is, most likely, linked to the manner in which the lava was supplied during the eruption and the eruptive style of the volcanic system. The sheet lobes were erupted over laterally extensive areas from fissure systems which had a continuous supply of lava, which contrasts with the tube-fed compound flows which were erupted in a gradual, piecemeal manner from point-sourced, low shield volcanoes with limited areal extents.     

西海固地区构造应力场特征及其与地震活动性的关系

我们根据该区11个M_s≥3.5级地震的震源机制资料,求得该区主压应力轴的平均方向为北东75°,平均仰角为17°。结合地形变资料和深部构造特征,讨论了该区构造应力场特征及其与地震活动性的关系。     

利用树轮宽度重建黄河源区1618—2009年5—6月最高气温

利用采集自青海省雪山乡的祁连圆柏建立树轮宽度标准年表,将标准年表与黄河源区内4个气象站各气象要素作相关分析,结果显示整个源区5—6月最高气温与标准年表相关性最显著,相关系数为-0.65。根据相关分析结果,重建了黄河源区1618—2009年5—6月最高气温距平序列,重建方程经过逐一剔除检验,方差解释量达42.2%,具有一定的可靠性。重建序列在近400年间先后经历了8个较暖时间段和8个较冷时间段,暖期时段有1644—1656、1727—1746、1786—1797、1817—1835、1860—1885、1916—1934、1952—1968和1992—2005年,冷期的时段分别为1632—1643、1657—1696、1747—1764、1798—1816、1836—1859、1898—1915、1935—1951和1969—1991年。对比本次重建序列与杂多、青藏高原东部以及长江源的气温重建序列,发现以上序列在公共时段变化趋势一致,另外,一些文献和历史记载也证实了此次重建的可靠性。