青岛市大气污染时间序列分析预报方法研究

根据青岛市大气污染监测资料 ,采用时间序列分析方法 ,建立多种预报模型 ,有原序列周期外延法、均生函数周期外延法、均生函数逐步回归法以及自回归预报法等 ,最后提出一种综合预报模型。连续预报试验表明 ,综合预报模型优于任何个别预报模型 ,有较好的预报能力。利用马尔可夫概型对污染状态 (轻、中、重 )进行了分级预报试验 ,也获得良好的效果。     

远海梭子蟹渔业生物学的初步调查

对海南岛北部湾远海梭子蟹进行了生物学调查。初步结果表明，周年雌雄性比约1：1。当年生蟹的交配期在8－10月，越年蟹在6－8月。初次性成熟的甲宽为75mm，体重48g。大量性成熟甲宽100－120mm，体重70－100g。此外生殖期较长，且周年有两个繁殖高峰期，分别在3－5月和8－10月。其群体甲宽优势组为110－150mm，体重优势组在60－150g。     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

关于波浪Boussinesq方程的研究

对有关波浪 Boussinesq方程的研究成果进行了系统的归纳总结和评述 ,以期对本学科的发展起到一定的引导和促进作用     

莱州湾温带风暴潮预报研究

本文依据莱州湾羊角沟、夏营两站建国以来的风暴增水资料，对莱州湾建国后发生的风暴潮进行了统计分析，并探讨了温带风暴潮产生的物理机制，此外还对莱州湾温带风暴增水以及诱发增水的天气形势进行了分析分类。在此基础上建立了莱州湾温带风暴潮统计预报方法，并在作业预报中对模型进行了检验，取得较为理想的效果。     

Variation in Water Masses on Shelf of Northern Bering Sea in September 2016-2018

Abstract

Based on hydrological data obtained during the 7th to 9th Chinese National Arctic Research Expeditions in the summers of 2016–2018, the main water structure on the shelf of the northern Bering Sea and the volume and heat fluxes of the Bering Strait throughflow were analyzed. Distinct variability was identified in the three Pacific water masses feeding the strait - Anadyr Water (AW), Bering Shelf Water (BSW) and Alaskan coastal water (ACW). Overall, the temperature and salinity of the entire section increased each year, with 2018 showing significant anomalies, i.e., a temperature anomaly of up to 1?°C and a maximum salinity anomaly of 2. From 2016 to 2018, the extent of the ACW gradually narrowed in the eastern part of this section, while the AW expanded eastward each year. The net volume transport through each of the three sections increased poleward from 1.65?Sv to 2.76?Sv, with the AW increasing from 0?Sv to 1.03?Sv, the BSW varying between 0.52–1.65?Sv, and the ACW gradually decreasing from 1.04?Sv to disappearing completely. The net heat fluxes were also poleward, varying between 25.77 TW and 61.50 TW, and showing a significant increase. Significant variations in magnitude and extent were observed in each water mass of the Bering Strait throughflow, which could produce widespread effects in the Arctic Ocean and the global ocean beyond.     

Numerical simulation of solitary wave scattering by a circular cylinder array

The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified.     

生物制氢研究进展

目前, 世界上利用的能源90%以上都是“化石能源”(如石油、煤炭和天然气等)。随着人类不断利用这些不可再生的“化石能源”, 它将会逐渐枯竭, 且其燃烧形成的产物(如CO2和SO2等)造成的严重环境污染(如温室效应和酸雨), 也有害于人类健康。因此, 人类正面临着能源紧缺和环境污染的双重压力。为满足能源需求量日益增长和环境保护的需要, 我们必须寻找环保型的可再生能源来替代“化石能源” 以满足人类对能源的需求。 在各种可再生能源中氢能将有可能替代“化石能源”,成为未来能源利用的主要形式。氢能具有许多优点:①氢能燃烧时只生成水, 不产生任何污染物, 甚至连CO2也不会产生, 实现真正的“零污染” 和“零排放”;②氢能的能量密度高, 放热高达122 kJ/g, 是焦炭放热的4.5倍, 汽油的2.68倍;③氢能可经济有效的输送和储存, 可以利用已有的天然气管道输送, 输送成本低, 甚至优于输电, 因为输送氢能不会产生如电能输送过程中所产生的能量损耗;氢能的存储也比较简便, 其中储氢合金材料就是一种非常理想的储氢方法, 该方法储氢能力强、运输方便、操作容易, 且安全可靠。在利用储氢合金进行储氢时, 还可用以进行制冷或采暖(Kulkova et al., 2006), 因为储氢材料在吸氢时放热, 在放氢时吸热。正因为氢能具有如此多的优点, 许多大的跨国公司开始对制氢技术高度关注, 如主要汽车制造商(通用、福特、戴姆勒-克莱斯勒等)对开发以氢能作为燃料的汽车投入大量的人力和物力;宝马公司从20世纪70年代就开始研制以氢能为能源的汽车, 宝马公司现在已拥有了时速达240km的氢能汽车(Munro,2003)。同时, 一些发达国家的科研院所的科学家们对氢能的制备方法、制氢机制以及提高产氢量等进行了大量的研究。     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

Methane-dominated thermochemical sulphate reduction in the Triassic Feixianguan Formation East Sichuan Basin, China: towards prediction of fatal H2S concentrations

New sour pools have recently found in the Lower Triassic Feixianguan Fm carbonate reservoirs in the East Sichuan Basin in China with H₂S up to 17.4% by volume. A recent blowout from a well drilled into this formation killed hundreds of people as a result of the percentage concentrations of H₂S. In order to assess the origin of fatal H₂S as well as the cause of petroleum alteration, H₂S concentrations and the isotopes, δ³⁴S and δ¹³C have been collected and measured in gas samples from reservoirs. Anhydrite, pyrite and elemental sulphur δ³⁴S values have been measured for comparison. The high concentrations of H₂S gas are found to occur at depths >3000 m (temperature now at 100 °C) in evaporated platform facies oolitic dolomite or limestone that contains anhydrite nodule occurrence within the reservoirs. Where H₂S concentrations are greater than 10% its δ³⁴S values lie between +12.0 and +13.2‰ CDT. This is within the range of anhydrite δ³⁴S values found within the Feixianguan Fm (+11.0 to +21.7‰; average 15.5±3.5‰ CDT). Thus H₂S must have been generated by thermochemical sulphate reduction (TSR) locally within the reservoirs. Burial history analysis and fluid inclusion data reveal that the temperature at which TSR occurred was greater than about 130–140 °C, suggesting that the present depth-temperature minimum is an artifact of post-TSR uplift. Both methane and ethane were actively involved in TSR since the petroleum became almost totally dry (no alkanes except methane) and methane δ¹³C values become significantly heavier as TSR proceeded. Methane δ¹³C difference thus reflects the extent of TSR. While it is tempting to use a present-day depth control (>3000 m) to predict the distribution of H₂S in the Feixianguan Fm, this is an invalid approach since TSR occurred when the formation was buried some 1000–2000 m deeper than it is at present. The likelihood of differential uplift across the basin means that it is important to develop a basinal understanding of the thermal history of the Feixianguan Fm so that it is possible to determine which parts of the basin have been hotter than 130–140 °C.