海浪数值模式研究回顾与进展

本文简单介绍了海浪的生成、发展理论,以及海浪数值模式的分类;回顾总结了国内外在海浪数值模式研究方面取得的成果。     

长江口九段沙潮沟系统分维研究

以长江口九段沙为研究区,采用2013年8月13日的Landsat-8遥感全色波段得到的九段沙潮沟分布图,利用Horton-Strahler原则将九段沙潮沟进行了分级。然后使用网格法对各个等级的潮沟进行了分维研究,计算了九段沙不同等级的每个潮沟左右两侧的维数值,并结合潮沟的宽度大小,对其维数值进行了比较和分析。研究结果表明,九段沙相同等级潮沟中,潮沟左侧维数的变化范围大于右侧,即潮沟左侧发育的复杂程度大于右侧;不同等级潮沟宽度的最小值变化幅度不大,但潮沟宽度的最大值变化幅度较大;不同等级潮沟宽度的变化和其潮沟左右两侧维数差值变化的相关性较小;不同等级潮沟,无论左侧还是右侧,潮沟维数大小随着潮沟的等级数和潮沟的平均宽度的增大而增大。     

HY-2A卫星雷达高度计数据的全球统计评价及质量分析

自HY-2A卫星发射以来,针对HY-2A卫星雷达高度计产品的交叉定标、真实性检验及质量评估工作一直在持续开展。本文主要以HY-2A卫星高度计第44周期的IGDR产品数据为例,通过使用全球分布图、二维直方图和每日均值统计的方法完成了与Jason-2IGDR产品的比对验证,同时对主要环境校正参数及地球物理产品的数据质量稳定性进行了分析,结果显示高度计产品数据质量较稳定,此外利用HY-2A卫星升降轨交叉点海面高度差、与Jason-2卫星交叉点海面高度差以及沿轨海平面异常数据分析的方法进行了HY-2A卫星高度计观测系统的性能评估,结果显示,HY-2A卫星海面高度精度约为7.48cm,精度接近Jason-2,能满足海洋应用与科学研究的需要。     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

巢湖沉积植硅体组合及中全新世以来的环境演变

尽管以前对眼虫进行过大量的形态发育研究和基于核糖体RNA基因的系统发育分析,但对于株系之间的关系仍然知之甚少．因其形态特征有限并且易变,很难鉴定眼虫的相似种和同种内不同的株．作者利用微卫星DNA指纹图谱,在七株眼虫中扩增了七个微卫星DNA位点,成功扩增的六个微卫星引物都得到了四到八个条带．从微卫星DNA指纹图谱计算得到的相似性系数范围从0．000到0．957．根据相似性系数得到的树状结构,七株眼虫在距离为0．9346处分为三支:E．mutabilis,E．intermedia和E．gracilis．其中,五株E．gracilis分为两组:来自日本的和美国的．不同地区的株得到不同的基因型,并初步分析了它们之间的关系．研究表明七株眼虫根据微卫星DNA指纹图谱被明显区分开．微卫星DNA指纹图谱具有很高的分辨率,是鉴定和区分原生动物相似种和同种内不同株的一种有用的新方法．     

不同节点布置下二维涡激振动的无单元法参数化分析

尝试建立1种基于无单元法的涡激振动数值模拟算法,并给出适用于涡激振动分析的前处理自动布点方法.基于无单元法理论,使用动最小二乘法构造形函数,利用无单元伽辽金法,采用速度和压力分离模式,及手工布点和自动布点2种方法所得出的节点布置形式,对流场控制方程进行空间离散,模拟二维涡激振动的流场形态,并对VIV相关参数进行分析,计算不同节点布置情况下的升力系数(Cl)、曳力系数(Cd)及斯特罗哈数(St),并与物理模型实验结果进行对比.计算结果表明,无单元伽辽金法应用于立管VIV分析是可行的,且文中采用2种布点方法均能较好的模拟流场中泻涡脱落的形态,计算结果与传统方法和物理模型实验结果吻合良好.证明文中2种布点方法都能用于固定圆柱的二维VIV分析,但自动布点法能够更好地适用于复杂问题的计算及圆柱体在流场中的VIV动力响应分析.     

The Sediment Source and Transport Trends around the Abandoned Yellow River Delta,China

Sediment source and transport trends are influenced by various hydrodynamic factors, and thus play important roles in sedimentary evolution and coastal stability. To examine sediment transport trends around the abandoned Yellow River delta promontory and its erosion mechanism, we employ empirical orthogonal function (EOF) analysis to study sedimentary characteristics and transport trends of the abandoned Yellow River delta in northern Jiangsu Province, China. The results showed that: (1) the main sediment source in the abandoned Yellow River delta is the submarine coastal slope and both sides of the abandoned Yellow River Delta; (2) the main hydrodynamics controlling sediment transport is the current that runs along the shore, coupled with waves, especially southward currents; (3) the sediment of the study area was redistributed under hydrodynamics; coarse sediments were eroded and broadly transported to the south. Therefore, it is concluded that the sediment sources and transport have important influence on coastal evolution: the sediment source area shows mass loss of deposits and erosion; deposits in the submarine coastal slope provide the source and were continuously eroded to provide materials to other places as a sediment source.     

Hybrid N-order Lagrangian Interpolation Eulerian?Lagrangian Method for Salinity Calculation

The Eulerian?Lagrangian method (ELM) has been used by many ocean models as the solution of the advection equation, but the numerical error caused by interpolation imposes restriction on its accuracy. In the present study, hybrid N-order Lagrangian interpolation ELM (LiELM) is put forward in which the N-order Lagrangian interpolation is used at first, then the lower order Lagrangian interpolation is applied in the points where the interpolation results are abnormally higher or lower. The calculation results of a step-shaped salinity advection model are analyzed, which show that higher order (N=3?8) LiELM can reduce the mean numerical error of salinity calculation, but the numerical oscillation error is still significant. Even number order LiELM makes larger numerical oscillation error than its adjacent odd number order LiELM. Hybrid N-order LiELM can remove numerical oscillation, and it significantly reduces the mean numerical error when N is even and the current is in fixed direction, while it makes less effect on mean numerical error when N is odd or the current direction changes periodically. Hybrid odd number order LiELM makes less mean numerical error than its adjacent even number order LiELM when the current is in the fixed direction, while the mean numerical error decreases as N increases when the current direction changes periodically, so odd number of N may be better for application. Among various types of Hybrid N-order LiELM, the scheme reducing N-order directly to 1st-order may be the optimal for synthetic selection of accuracy and computational efficiency.     

Assessing the Measurement Consistency Between the Jason-2/AMR and SARAL/AltiKa/DFMR Microwave Radiometers Using Simultaneous Nadir Observations

SARAL/AltiKa has a Dual Frequency Microwave Radiometer (DFMR), and Jason-2 has an Advanced Microwave Radiometer (AMR). Both microwave radiometer sensors include a 23.8 GHz primary water sensing channel. The measurement consistencies between DFMR and AMR are important for establishing a consistent altimetry data set between SARAL/AltiKa and Jason-2 in order to accurately assess sea level rise in a long-term time series. This study investigates the measurement consistency in the 23.8 GHz channel between DFMR and AMR at the Simultaneous Nadir Overpasses (SNO's) between the two satellites and also at coldest ocean brightness temperature locations. Preliminary results show that while both instruments show no significant trends over the one year since the launch of SARAL, a consistent relative bias of 2.88 K (DFMR higher than AMR) with a standard deviation of 0.98 K is observed. The relative bias at the lowest brightness temperature from the SNO method (-3.82 K) is consistent with that calculated from coldest ocean method (-3.74 K). The relative bias exhibits strong latitude (and scene temperature) dependency, changing from -3.82 K at high latitudes to -0.92 K near the equator. There also exists an asymmetry between the northern and southern hemisphere. The relative bias increases toward the lower end of brightness temperature.     

Study on electric variations of media in epicentral area by geomagnetic transfer functions

ＳｔｕｄｙｏｎｅｌｅｃｔｒｉｃｖａｒｉａｔｉｏｎｓｏｆｍｅｄｉａｉｎｅｐｉｃｅｎｔｒａｌａｒｅａｂｙｇｅｏｍａｇｎｅｔｉｃｒａｎｓｆｅｒｆｕｎｃｔｉｏｎｓＸｉａｏ－ＰｉｎｇＺＥＮＧ；（曾小苹）Ｙｕｎ－ＦａｎｇＬＩＮＩ；（林云芳）Ｚｈｏｎｇ－ＪｉｅＺＨ...