分形理论在云南个旧锡矿遥感信息定量化分析中的应用

应用分形理论和方法对个旧锡矿遥感信息进行了定量化研究.结果显示,在格子边长为1.4～4.5 km的标度范围内,其遥感蚀变和断裂构造进入的总格子数的对数与格子边长的对数均具有很好的线性相关性,表明在研究标度范围内,各子区遥感线性与蚀变信息具有良好的统计自相似性和分形特征.在此基础上,以19号区和26号区为例,分析并进一步探讨了遥感信息分形特征的成矿意义.     

再创找矿佳绩,为我省经济建设立新功——对我省找矿突破的几点看法

分析了福建省铁、铜、铅锌、钼、金、银、锡、非金属、能源等矿产的成矿地质条件、资源背景、找矿潜力、重点成矿区带、部分含矿层、岩浆-构造-成矿作用等,对我省地质找矿突破的方向提出了看法和建议。     

霞浦核电基地海洋生物放射性本底水平及辐射剂量评价

为掌握霞浦核电基地海洋生物的放射性本底水平,在其周边50 km范围内采集5类9种海洋生物样品,测量其中的天然放射性核素²³⁸U、²³²Th、²²⁶Ra、⁴⁰K,以及人工放射性核素¹³⁷Cs、¹³⁴Cs、⁹⁰Sr、⁵⁸Co、⁶⁰Co、⁵⁴Mn、^110mAg、⁶⁵Zn的活度浓度并进行辐射剂量评价。结果显示,所有样品中¹³⁴Cs、⁵⁸Co、⁶⁰Co、⁵⁴Mn、^110mAg、⁶⁵Zn的活度浓度均低于最小可探测活度浓度,²³⁸U、²³²Th、²²⁶Ra、⁴⁰K、¹³⁷Cs和⁹⁰...     

试论大厂锡多金属矿田矿化蚀变分带特征

大厂矿田矿化蚀变分带特征十分明显, 在水平方向, 整个矿田可分为西、中、东３ 个矿带。西、东矿带主要产出锡石—硫化物型矿床, 围岩蚀变类型主要有硅化、钾长石化、电气石化、绢云母化、碳酸盐化等。中矿带主要分布矽卡岩型锌铜硫化物矿床, 并有锑钨石英脉型矿床叠加其上。整个矿田矿化蚀变分带又具明显的不对称性, 并且每一种矿化类型又表现出各自的分带特点。大厂矿田的总体矿化蚀变分带特征与传统的顺向或逆向分带不同, 反映了多成因、多期次叠加成矿及蚀变的特点     

建国前中国共产党获取群众支持经验浅析

从1921年中国共产党的成立到1949年中华人民共和国成立前,是中国共产党创建与局部执政时期。这时期,中国共产党及其领导下的军队为了获取群众支持,积累了丰富的经验。这些经验可以概括为:关心群众利益,让群众拥护党和政府;实行精兵简政,让群众理解党和政府;严惩贪污腐败,让群众相信党及其领导下的地方政府。     

地缘战略交汇区地理环境的介质属性及其地缘环境效应——以乌克兰为例

文章将理论建构与案例分析相结合,首先提出地缘介质概念,论证了地理环境的介质属性及其传导权力的效率差异,并阐明不同地缘介质的地缘功能,然后以乌克兰为案例,揭示地缘行为体挖掘并利用地理环境的介质属性进行权力施动的空间实践及其产生的地缘环境效应。结果表明：1）地处地缘战略交汇区的乌克兰,其地理环境的介质属性显著,这为地缘行为体在乌克兰进行权力施动提供了空间中介。2）乌克兰地理环境中各介质要素的地缘功能及其对地缘行为体权力传导的效率差异明显。地理位置和地形地貌具有地缘安全功能,自然资源的地缘经济功能强大,政党和民族的地缘政治功能较强,语言和宗教的地缘文化功能较为凸显。自然资源、政党、民族、宗教的介质属性较强,地理位置、地形地貌的介质属性在逐渐减弱。3）不同地缘行为体（利益集团）争相利用地理环境的介质属性进行权力的空间施动,使其在乌克兰的地缘位势此消彼长,致使乌克兰地缘环境激烈震荡。从地缘介质的视角探索权力施动的空间实践及其效应,对提升中国在周边的地缘影响力具有一定启示意义。     

巴基斯坦城镇体系特征及其影响因素

基于人口普查数据、自然环境、经济产业及交通路网等公开数据,运用城镇体系金字塔、城镇规模基尼系数以及核密度分析等方法,对巴基斯坦城镇体系特征及其影响因素进行分析,发现:1)规模结构方面,城镇规模分布较集中,表现为"大城市化"与"小城市化"并重的特征,中间级别城市发展滞后,城镇人口金字塔大致呈现沙漏形态;空间结构方面,整体...     

An estimation of internal soliton forces on a pile in the ocean

Internal soliton forces on oil-platform piles in the ocean are estimated with the Morison Formula. Different from sur- face wave forces, which change only in magnitude along a pile, internal soliton forces can be distributed over the entire pile in the water and they change not only in magnitude but also in direction with depth. Our calculations show that the maximum total force caused by a soliton with its associated current of 2.1 m s-1 is nearly equal to the maximum total force exerted by a surface wave with a wavelength of 300 m and a wave-height of 18 m. The total internal soliton force is large enough to affect the operations of marine oil platforms and other facilities. Therefore, the influence of internal solitons should not be neglected in the design of oil platforms.     

Exopolysaccharide production by four cyanobacterial isolates and preliminary identification of these isolates

Four marine cyanobacterial isolates, named 104, 109, 113 and 115, from marine water off China＇s coast can release a large amount of exopolysaccharide （EPS） to medium. The effects of different components in medium on EPS production by the four isolates were investigated. Under the optimal condition, the EPS released by isolates 104,109, 113 and 115 reached 7.48 g L^-1, 8.33 g L^-1, 18.26 g L^-1, and 6.78 g L^-1 within 14 d,respectively. Based on the conventional identification methods for cyanobacteria,these isolates were assigned to genus Cyanothece.     

Nonlinear coupled analysis of a single point mooring system

Coupled effects on a single point mooring(SPM) system subjected to the combined action of wind,waves and current are studied in this paper. Due to the complicatedness of the sea state and the huge size of the vessel,physical experimental study is both time consuming and uneconomical,whereas the numerical study is cost-effective and DNV software provides powerful SESAM software in solving the issues. This paper focuses on the modeling process of the SPM system,catenary equilibrium calculation,static analysis of the vessel in three different scenarios,and dynamic response simulation of the SPM system under environmental excitations. The three scenarios in study are as follows:the SPM is under the combined function of(a) wind,waves and current,(b) wind and waves,(c) current and waves. They are so set that one can compare the contributions of different types of loads in both static and dynamic studies. Numerical study shows that wind and current are the two major factors contributing to the mooring line tension,and surge and sway are the two dominant motions of the moored vessel subjected to environmental excitations.