Laboratory study of the effect of temperature difference on the disintegration of redbed softrock

To explore the impact of temperature difference (TD) on the disintegration of redbed softrock, three types of redbed rock, collected from Nanxiong Basin, were analyzed under three different treatments: TD, wetting and drying (WD), and TDWD-temperature difference and WD. To better understand the influence of different ranges of TD on disintegration during WD cycles, pH (hydrogen ion concentration) values, electrical conductivity (EC) values, and concentration of cations in leachate released during treatment were measured. The results show that no significant change can be observed under single TD treatment but that TD can increase the disintegration rate by accelerating the water–rock interaction. The effect of TD is more significant for rock with weak resistance to disintegration.     

The Impact of Global/Local Bias on Task-Solving in Map-Related Tasks Employing Extrinsic and Intrinsic Visualization of Risk Uncertainty Maps

The form of visual representation affects both the way in which the visual representation is processed and the effectiveness of this processing. Different forms of visual representation may require the employment of different cognitive strategies in order to solve a particular task; at the same time, the different representations vary as to the extent to which they correspond with an individual’s preferred cognitive style. The present study employed a Navon-type task to learn about the occurrence of global/local bias. The research was based on close interdisciplinary cooperation between the domains of both psychology and cartography. Several different types of tasks were made involving avalanche hazard maps with intrinsic/extrinsic visual representations, each of them employing different types of graphic variables representing the level of avalanche hazard and avalanche hazard uncertainty. The research sample consisted of two groups of participants, each of which was provided with a different form of visual representation of identical geographical data, such that the representations could be regarded as ‘informationally equivalent’. The first phase of the research consisted of two correlation studies, the first involving subjects with a high degree of map literacy (students of cartography) (intrinsic method: N?=?35; extrinsic method: N?=?37). The second study was performed after the results of the first study were analyzed. The second group of participants consisted of subjects with a low expected degree of map literacy (students of psychology; intrinsic method: N?=?35; extrinsic method: N?=?27).The first study revealed a statistically significant moderate correlation between the students’ response times in extrinsic visualization tasks and their response times in a global subtest (r?=?0.384, p?<?0.05); likewise, a statistically significant moderate correlation was found between the students’ response times in intrinsic visualization tasks and their response times in the local subtest (r?=?0.387, p?<?0.05). At the same time, no correlation was found between the students’ performance in the local subtest and their performance in extrinsic visualization tasks, or between their scores in the global subtest and their performance in intrinsic visualization tasks. The second correlation study did not confirm the results of the first correlation study (intrinsic visualization/‘small figures test’: r?=?0.221; extrinsic visualization/‘large figures test’: r?=?0.135). The first phase of the research, where the data was subjected to statistical analysis, was followed by a comparative eye-tracking study, whose aim was to provide more detailed insight into the cognitive strategies employed when solving map-related tasks. More specifically, the eye-tracking study was expected to be able to detect possible differences between the cognitive patterns employed when solving extrinsic- as opposed to intrinsic visualization tasks. The results of an exploratory eye-tracking data analysis support the hypothesis of different strategies of visual information processing being used in reaction to different types of visualization.     

Geoidal Geopotential and World Height System

The geoidal geopotential value of W ₀ = 62 636 856.0 ± 0.5m ² s ^–2 , determined from the 1993 –1998 TOPEX/POSEIDON altimeter data, can be used to practically define and realize the World Height System. The W ₀ -value can also uniquely define the geoidal surface and is required for a number of applications, including General Relativity in precise time keeping and time definitions. Furthermore, the W ₀ -value provides a scale parameter for the Earth that is independent of the tidal reference system. All of the above qualities make the geoidal potential W ₀ ideally suited for official adoption as one of the fundamental constants, replacing the currently adopted semi-major axis a of the mean Earth ellipsoid. Vertical shifts of the Local Vertical Datum (LVD) origins can easily be determined with respect to the World Height System (defined by W ₀ ), in using the recent EGM96 gravity model and ellipsoidal height observations (e.g. GPS) at levelling points. Using this methodology the LVD vertical displacements for the NAVD88 (North American Vertical Datum 88), NAP (Normaal Amsterdams Peil), AMD (Australian Height Datum), KHD (Kronstadt Height Datum), and N60 (Finnish Height Datum) were determined with respect to the proposed World Height System as follows: –55.1 cm, –11.0 cm, +42.4 cm, –11.1 cm and +1.8 cm, respectively.     

Surface-sediment and epilithic diatom pH calibration sets for remote European mountain lakes (AL:PE Project) and their comparison with the Surface Waters Acidification Programme (SWAP) calibration set

A modern diatom-pH calibration data-set consisting of surface-sediment diatom assemblages from 118 lakes and 530 taxa is presented. The AL:PE data-set is from high-altitude or high-latitude lakes in the Alps, Norway, Svalbard, Kola Peninsula, UK, Slovenia, Slovakia, Poland, Portugal, and Spain (pH range = 4.5-8.0; DOC range = 0.2-3.2 mg l^-1). In addition, 92 epilithon samples from 22 high-altitude or high-latitude lakes comprise an AL:PE epilithon diatom-pH data-set. Weighted averaging partial least squares regression is used to develop pH-inference models. The AL:PE data-set has a root-mean-square-error of prediction (RMSEP) of 0.33 and a maximum bias of 0.36 pH units and r² of 0.82, as assessed by leave-one-out cross-validation. The epilithon data-set has, after data-screening and the deletion of one very obvious outlier, a RMSEP of 0.23 and a maximum bias of 0.18 pH units and r² of 0.88. The 167 sample SWAP diatom-pH data-set from lowland or upland lakes in the UK, Norway, and Sweden has a RMSEP of 0.29 and a maximum bias of 0.23 pH units and r² of 0.86.The pH optima, as estimated by weighted averaging and Gaussian regression, are compared for the three data-sets (AL:PE, SWAP, AL:PE epilithon). There is a good correspondence between the AL:PE and the AL:PE epilithon optima, but a consistent bias between the AL:PE and SWAP optima, with the SWAP optima being lower than the AL:PE estimates.The predictive performances of the AL:PE and SWAP calibration data-sets are compared using independent test samples and six core sequences, all from high-altitude lakes, one in south-east Siberia and five in eastern Scotland. The results show the importance of using the AL:PE data-set for inferring lake-water pH from diatom assemblages in high-altitude or high latitude lakes with low DOC concentrations.     

Temporary Array Data for Studying Seismic Anisotropy of Variscan Massifs – The Armorican Massif,French Massif Central And Bohemian Massif

We present the first results of a comparison of deep lithosphere structure of three Variscan massifs - the Armorican Massif, French Massif Central and Bohemian Massif, as revealed by recent tomographic studies of seismic anisotropy. The data originate from several field measurements made in temporary arrays of stations equipped with both short-period and broadband seismometers with digital recording. The study is based on teleseismic body waves and a joint inversion of anisotropic data (P-residual spheres, the fast shear-wave polarizations and split times) and demonstrates that the three Variscan massifs appear to consist of at least two parts with different orientation of large-scale fabric derived from seismic anisotropy. The boundaries of anisotropic lithospheric domains are related to prominent tectonic features recognised on the surface as sutures, shear zones or transfer fault zones, as well as grabens, thus indicating that some of them extend deep through the entire lithosphere.     

The Flattening Index of the Eclipse White-Light Corona and Magnetic Fields

From observations of the solar white-light corona at 65 eclipses from 1851 to 2015 we confirm earlier findings that the flattening index of the white-light corona depends on the phase, rather than the magnitude of solar cycles, which is in contrast with behavior of other major solar activity indices like the sunspot number, the 2800 MHz radio flux, etc. This indicates that mechanisms responsible for creation and distribution of helmet streamers, the most essential coronal structures influencing the flattening index, could be of different magnetic nature from those of other manifestations of solar surface activity.     

Validation of the CME Geomagnetic Forecast Alerts Under the COMESEP Alert System

Under the European Union 7th Framework Programme (EU FP7) project Coronal Mass Ejections and Solar Energetic Particles (COMESEP, http://comesep.aeronomy.be ), an automated space weather alert system has been developed to forecast solar energetic particles (SEP) and coronal mass ejection (CME) risk levels at Earth. The COMESEP alert system uses the automated detection tool called Computer Aided CME Tracking (CACTus) to detect potentially threatening CMEs, a drag-based model (DBM) to predict their arrival, and a CME geoeffectiveness tool (CGFT) to predict their geomagnetic impact. Whenever CACTus detects a halo or partial halo CME and issues an alert, the DBM calculates its arrival time at Earth and the CGFT calculates its geomagnetic risk level. The geomagnetic risk level is calculated based on an estimation of the CME arrival probability and its likely geoeffectiveness, as well as an estimate of the geomagnetic storm duration. We present the evaluation of the CME risk level forecast with the COMESEP alert system based on a study of geoeffective CMEs observed during 2014. The validation of the forecast tool is made by comparing the forecasts with observations. In addition, we test the success rate of the automatic forecasts (without human intervention) against the forecasts with human intervention using advanced versions of the DBM and CGFT (independent tools available at the Hvar Observatory website, http://oh.geof.unizg.hr ). The results indicate that the success rate of the forecast in its current form is unacceptably low for a realistic operation system. Human intervention improves the forecast, but the false-alarm rate remains unacceptably high. We discuss these results and their implications for possible improvement of the COMESEP alert system.     

Urban landslide monitoring by combined use of multiple methodologies - a case study on Sv. Anton town,Slovakia

ABSTRACT

We employed integrated methods to assess the landslide movement in Sv. Anton town in the Western Carpathians Neogene Volcanic Field (Central Slovakia). The integrated diagnostics required study of the landslide kinematic activity by a combination of Global Navigation Satellite Systems (GNSS) and Electrical Resistivity Tomography (ERT) imaging from November 2013 to March 2015. A topographic model with 2-cm accuracy was constructed from Unmanned Aerial Vehicles (UAV) photogrammetry. Continuous spatial datasets of movement and displacement field vectors were interpolated from the measured movements over the entire study period. Although deformation studies in Slovakia have a long-term tradition, complex interdisciplinary studies in urbanized areas are still lacking. This inspired our main objectives: to identify landslide kinematics and to reconstruct and define the rates of annual landslide movement obtained from geodetic measurement at the monitoring points. Our results demonstrate how landslide integrated diagnostics contribute to the detection of slope instability, with a maximum velocity of 60.82 mm/yr during the summer period. The precipitation effects are consistent with the Sv. Anton landslide displacement acceleration, and the following increases in total monthly precipitations are staggering compared to long-term monthly averages: July precipitation increased by 175.3%, August by 203.3%, and September by 198.1%.     

Thermochronological insights into the structural contact between the Tian Shan and Pamirs,Tajikistan

Multi‐method thermochronology along the Vakhsh‐Surkhob fault zone reveals the thermotectonic history of the South Tian Shan–Pamirs boundary. Apatite U/Pb analyses yield a consistent age of 251 ± 2 Ma, corresponding to cooling below ~550–350°C, related to the final closure of the Palaeo‐Asian Ocean and contemporaneous magmatism in the South Tian Shan. Zircon (U–Th–Sm)/He ages constrain cooling below ~180°C to the end of the Triassic (~200 Ma), likely related either to deformation induced by the Qiangtang collision or to the closure of the Rushan Ocean. Apatite fission track thermochronology reveals two low‐temperature (<120°C) thermal events at ~25 Ma and ~10 Ma, which may be correlated with tectonic activity at the distant southern Eurasian margin. The late Miocene cooling is confirmed by apatite (U–Th–Sm)/He data and marks the onset of mountain building within the South Tian Shan that is ongoing today.