The Cauvery Shear Zone, Southern Granulite Terrain, India: A crustal-scale flower structure

The Cauvery Shear Zone (CSZ) is a crustal-scale shear system within the Southern Granulite Terrain along the southern margin of the Archaean Dharwar craton. Structural interpretation of satellite data and field observations reveal four major shear zones within the CSZ system. They show dextral shear kinematics synchronous with a major Neoproterozoic tectono-metamorphic event (D2) associated with intracrustal melting and migmatisation. The disposition, geometry and contemporaneity of shear fabrics of the CSZ system are modelled in terms of a crustal-scale flower structure akin to transpressional and collisional orogens. In the light of recent seismic evidence for a displaced Moho structure and a mid- to lower-crustal low velocity zone, the flower structure across the CSZ may extend to mantle depths.     

Charnockite genesis across the Archaean–Proterozoic terrane boundary in the South Indian Granulite Terrain: Constraints from major–trace element geochemistry and Sr–Nd isotopic systematics

Major, trace element compositions and Sr–Nd isotopic characteristics of charnockitic gneisses from the Southern Granulite Terrain (SGT), South India are presented. The study region encompasses the central segment of the Cauvery Shear Zone system (CSZ) and regions within the Madurai Block (MB) immediately south of it (designated here as the CSZ/MB and MB domains). Differences in the compositions and source characteristics between charnockitic rocks of the CSZ vis-à-vis those of the CSZ/MB and MB regions are highlighted. Foremost, the charnockites and enderbites of the CSZ show highly fractionated REE patterns with positive Eu-anomalies, depleted HREE, Y and near chondritic εNd₀ and initial-⁸⁷Sr/⁸⁶Sr at ca. 2.5 Ga, consistent with hydrous partial melting of amphibolitic crust with residual garnet and hornblende for the parental melts. By contrast, modeled at ca. 1.8 Ga and 0.8 Ga, the CSZ/MB and MB charnockitic rocks, which show a wider range of Ti and P, relatively lower degree of HREE depletion, commonly negative Eu-anomalies and undepleted Y, present clear evidence for involvement of Archaean crustal components in sources of their magmatic protoliths. There is also evidence for significant intracrustal melting processes within a thickened crust at elevated temperatures between 800 and 1000 °C. Implications to the controversial Archaean–Neoproterozoic terrane boundary problem of the SGT are discussed.     

Studies on flow characteristics of coal–oil–water slurry system

Experiments were carried out to investigate the rheological properties of coal–oil–water suspension containing solids of different sizes. Two different coal samples with mean particle sizes of 120 mesh, 175 mesh and 220 mesh were used. The coal concentration was varied from 5% to 25% by weight. Sodium silicate has been used as an additive to study the behavior of the variation of average viscosity of the suspension. A generalized correlation has been developed to predict the average viscosity of suspension in terms of particle diameter of the coal, concentration of coal, viscosity of the suspending medium and the concentration of water. Experimental investigations revealed that coal–oil–water suspensions show an increase in the viscosity with decrease in coal size but with the addition of an additive, the average viscosity tends to decrease initially up to a certain optimum dosages and thereafter it increases with further addition of additives. Two empirical correlations are proposed for average viscosity of the coal–oil–water suspension, μ_sL in terms of physical properties of the solid and viscosity of the suspending medium with and without additives.     

Calibration of a constitutive model using genetic algorithms

Before any constitutive model can be used in a numerical procedure, the model needs to be calibrated using laboratory test results. The traditional calibration techniques use stress and strain levels at certain states that a material undergoes during certain types of laboratory tests. Sometimes this method of calibrating a constitutive model fails to capture the overall behavior of a material, i.e. behavior at every point in stress/strain path. In this paper, we have shown how a random search technique, genetic algorithm (GA), can be used to calibrate constitutive models. The advantages of using GA are that it considers the overall behavior of a material, not the behavior at some specific states as the traditional method does, and it can work with many types of laboratory tests. The concept is applied to calibrate the hierarchical single surface (HiSS) δ_l model for geologic materials. Three cases have been studied where the difference is in the type of test data used to calibrate the model. These three different test data are: (1) simulated conventional test data, (2) simulated cyclic test data, and (3) real test data. A comparison of two different cross-over schemes, one-point and six-point, has been made.     

An analytical approach to ascertain saturation‐excess versus infiltration‐excess overland flow in urban and reference landscapes

Uncontrolled overland flow drives flooding, erosion, and contaminant transport, with the severity of these outcomes often amplified in urban areas. In pervious media such as urban soils, overland flow is initiated via either infiltration‐excess (where precipitation rate exceeds infiltration capacity) or saturation‐excess (when precipitation volume exceeds soil profile storage) mechanisms. These processes call for different management strategies, making it important for municipalities to discern between them. In this study, we derived a generalized one‐dimensional model that distinguishes between infiltration‐excess overland flow (IEOF) and saturation‐excess overland flow (SEOF) using Green–Ampt infiltration concepts. Next, we applied this model to estimate overland flow generation from pervious areas in 11 U.S. cities. We used rainfall forcing that represented low‐ and high‐intensity events and compared responses among measured urban versus predevelopment reference soil hydraulic properties. The derivation showed that the propensity for IEOF versus SEOF is related to the equivalence between two nondimensional ratios: (a) precipitation rate to depth‐weighted hydraulic conductivity and (b) depth of soil profile restrictive layer to soil capillary potential. Across all cities, reference soil profiles were associated with greater IEOF for the high‐intensity set of storms, and urbanized soil profiles tended towards production of SEOF during the lower intensity set of storms. Urban soils produced more cumulative overland flow as a fraction of cumulative precipitation than did reference soils, particularly under conditions associated with SEOF. These results will assist cities in identifying the type and extent of interventions needed to manage storm water produced from pervious areas.     

Interactive effect of cadmium and zinc on chromium uptake in spinach grown in Vertisol of Central India

A pot culture experiment was conducted to study impact and interaction of multi-metals on growth, yield and metals uptake by spinach (variety All Green). Three levels of each chromium (0, 50 and 100 mg/kg), cadmium (0, 1 and 2 mg/kg) and zinc (0, 10 and 20 mg/kg) in combinations (total treatments 3 × 3 × 3 = 27) were applied in a Vertisol (5 kg). The results showed that increasing the concentration of chromium, cadmium and zinc in soil enhanced the respective metal concentrations in spinach root and shoot. When cadmium at 2 mg/kg along with chromium at 100 mg/kg soil was applied, chromium concentration and uptake were decreased in root and shoot. Meanwhile, zinc application had no significant effect on chromium uptake and concentration in spinach biomass. From the results, it was concluded that cadmium at higher dose had an antagonistic effect over chromium. On the other hand, in chromium, cadmium and zinc combinations particularly at their higher levels, a competition among each other was found. Therefore, the findings could be used as guidelines for controlling and management of heavy metals pollution in farmland.     

A comparative study of soil erosion modelling by MMF,USLE and RUSLE

The quantitative assessment of spatial soil erosion is valuable information to control the erosion. The study area in a part of Narmada river in central India is selected. The main objective is to assess and compare the results obtained from three soil erosion models using GIS platform. Variation in the rate of erosion of the three models is compared considering varying slope, soil and land use of the area. Three models selected are Morgan–Morgan–Finney (MMF), Universal Soil Loss Equation (USLE) and Revised Universal Soil Loss Equation (RUSLE). The best fit or the most reliable model for the study area is selected after validation with the observed sedimentation data. The results give –39.45%, –9.60% and 4.80% difference in the values of sedimentation by MMF, USLE and RUSLE, respectively, from the observed data. Finally, RUSLE model has been found to be most reliable for the study area.     

Impact of INSAT-3D radiance data assimilation using WRF 3DVAR on simulation of Indian summer monsoon and high-resolution rainfall forecast over hilly terrain

Natural Hazards - This study describes the impact of assimilation of INSAT-3D radiances data from both imager and sounder for Indian summer monsoon simulation and rainfall forecast over a hilly...     

Forbush Decrease: A New Perspective with Classification

Sudden short-duration decreases in cosmic ray flux, known as Forbush decreases (FDs), are mainly caused by interplanetary disturbances. A generally accepted view is that the first step of an FD is caused by a shock sheath and the second step is due to the magnetic cloud (MC) of the interplanetary coronal mass ejection (ICME). This simplistic picture does not consider several physical aspects, such as whether the complete shock sheath or MC (or only part of these) contributes to the decrease or the effect of internal structure within the shock-sheath region or MC. We present an analysis of 16 large (\({\geq}\,8 \%\)) FD events and the associated ICMEs, a majority of which show multiple steps in the FD profile. We propose a reclassification of FD events according to the number of steps observed in their respective profiles and according to the physical origin of these steps. This study determines that 13 out of 16 major events (\({\sim}\,81\%\)) can be explained completely or partially on the basis of the classic FD model. However, it cannot explain all the steps observed in these events. Our analysis clearly indicates that not only broad regions (shock sheath and MC), but also localized structures within the shock sheath and MC have a significant role in influencing the FD profile. The detailed analysis in the present work is expected to contribute toward a better understanding of the relationship between FD and ICME parameters.     

Mercuric Chloride Induced Inhibition of Acid and Alkaline Phosphatase Activity in the Kidney of Mudskipper,Boleophthalmus dentatus

The present paper deals with the inhibition of the specific activity of the acid and alkaline phosphatases in the kidney tissue of mudskipper Boleophthalmus dentatus, exposed to different sublethal concentrations of mercuric chloride. There was a more or less linear inhibition of the specific activity of both the enzymes with increasing concentration of mercuric chloride as well as exposure time. The inhibition of acid phosphatase could be due to the rupture of lysosomal membrane in the presence of mercury compound, which acts as a labilizing agent. The inhibition of alkaline phosphatase probably caused a breakdown of the membrane transport system.