Indicator mineralogy of kimberlite boulders from eskers in the Kirkland Lake and Lake Timiskaming areas, Ontario, Canada

Sixteen kimberlite boulders were collected from three sites on the Munro and Misema River Eskers in the Kirkland Lake kimberlite field and one site on the Sharp Lake esker in the Lake Timiskaming kimberlite field. The boulders were processed for heavy-mineral concentrates from which grains of Mg-ilmenite, chromite, garnet, clinopyroxene and olivine were picked, counted and analyzed by electron microprobe. Based on relative abundances and composition of these mineral phases, the boulders could be assigned to six mineralogically different groups, five for the Kirkland Lake area and one for the Lake Timiskaming area. Their indicator mineral composition and abundances are compared to existing data for known kimberlites in both the Kirkland Lake and Lake Timiskaming areas. Six boulders from the Munro Esker form a compositionally homogeneous group (I) in which the Mg-ilmenite population is very similar to that of the A1 kimberlite, located 7–12 km N (up-ice), directly adjacent to the Munro esker in the Kirkland Lake kimberlite field. U–Pb perovskite ages of three of the group I boulders overlap with that of the A1 kimberlite. Three other boulders recovered from the same localities in the Munro Esker also show some broad similarities in Mg-ilmenite composition and age to the A1 kimberlite. However, they are sufficiently different in mineral abundances and composition from each other and from the A1 kimberlite to assign them to different groups (II–IV). Their sources could be different phases of the same kimberlite or—more likely—three different, hitherto unknown kimberlites up-ice of the sample localities along the Munro Esker in the Kirkland Lake kimberlite field. A single boulder from the Misema River esker, Kirkland Lake, has mineral compositions that do not match any of the known kimberlites from the Kirkland Lake field. This suggests another unknown kimberlite exists in the area up-ice of the Larder Lake pit along the Misema River esker. Six boulders from the Sharp Lake esker, within the Lake Timiskaming field, form a homogeneous group with distinct mineral compositions unmatched by any of the known kimberlites in the Lake Timiskaming field. U–Pb perovskite age determinations on two of these boulders support this notion. These boulders are likely derived from an unknown kimberlite source up-ice from the Seed kimberlite, 4 km NW of the Sharp Lake pit, since indicator minerals with identical compositions to those of the Sharp Lake boulders have been found in till samples collected down-ice from Seed. Based on abundance and composition of indicator minerals, most importantly Mg-ilmenite, and supported by U–Pb age dating of perovskite, we conclude that the sources of 10 of the 16 boulders must be several hitherto unknown kimberlite bodies in the Kirkland Lake and Lake Timiskaming kimberlite fields.     

Stable isotope constraints on the fluid source of hydrothermal breccia pipes in the Tankwa Karoo depocentre,South Africa: Breakdown of authigenic minerals during sill intrusion

The Karoo Basin covers much of South Africa and is an area of prospective shale gas exploration, with the Whitehill Formation the target shale unit. However, the sedimentary succession, including the Whitehill, has been intruded by a series of sills and dykes associated with the Karoo Large Igneous Province (~183 Ma), which are expected to have modified the thermal history of the basin dramatically. Here, we investigate a secondary effect of these intrusions: a series of hydrothermal vent complexes, or breccia pipes, focusing on using O, H, and C isotopes to constrain the origin and evolution of fluids produced during the intrusion of basaltic sills. A cluster of breccia pipes have been eroded down to the level of the Ecca Group at Luiperdskop on the western edge of the Karoo basin; a small isolated pipe of similar appearance crops out 13 km to the east. The Luiperdskop pipes are underlain by a Karoo dolerite sill that is assumed to provide the heat driving fluidization. The pipes consist of fine‐grained matrix and about 8% clasts, on average, of mostly sedimentary material; occasional large rafts of quartzite and dolerite are also present. The presence of clasts apparently from the Dwyka Group is consistent with the depth of formation of the pipes being at, or near, the base of the Karoo Supergroup, between 400 and 850 m below present surface. The presence of chlorite as the dominant hydrous mineral is consistent with an emplacement temperature between 300 and 350°C. The major and trace element, and O‐ and H‐isotope composition of the Tankwa breccias is homogenous, consistent with them being derived from the same source. The δ¹⁸O values (vsVSMOW) of the breccias are relatively uniform (7.1‰–8.7‰), and are similar to that of the country rock shale, and both are lower than expected for shale. The water content of the breccia is between 2.7 and 3.1 wt.% and the δD values range from ?109‰ to ?144‰. Calcite in vesicles has δ¹³C and δ¹⁸O (VSMOW) values of ?4.2‰ and 24.0‰, respectively. The low δD value of the breccia rocks does not appear to be due to the presence of methane in the fluid. Instead, it is proposed that low δD and δ¹⁸O values are the result of the fluid being derived from the breakdown of clay minerals that formed and were deposited at a time of cold climate at ~290 Ma.     

A comparison of mud- and sand-dominated meanders in a downstream coarsening reach of the mixed bedrock-alluvial Klip River, eastern Free State, South Africa

Along a 28 km reach of the Klip River, eastern Free State, South Africa, mud- and sand-dominated meanders have developed in close proximity within a floodplain wetland up to 1.5 km wide, providing an unusual opportunity to compare their characteristics under similar hydrological conditions. Throughout the reach, the channel bed is grounded on sandstone/shale bedrock although the banks are alluvial, and most river activity occurs during summer high flows. The reach can be divided into three geomorphological zones: Zone 1 (0–11 km), a muddy proximal part with a single meandering channel (w/d < 10) and near-permanent standing water in oxbows and backswamps; Zone 2 (11–17.5 km), a transitional mud-to-sand part with one main channel (w/d  20–30), a number of sinuous palaeochannels and oxbows, and only limited standing water; and Zone 3 (17.5–28 km), a sandy distal part with a single meandering channel (w/d  15–30), scroll bars and oxbows, and little standing water. Each zone also has a distinctive sedimentology: Zone 1 is characterised by an  3–4 m thick succession of basal sand and minor granules overlain by dominantly muddy sediment deposited primarily by oblique accretion in meander bends; Zone 2 is characterised by < 4 m of interbedded sand and mud deposited primarily by lateral point-bar accretion, although a history of avulsions also attests to the importance of abandoned-channel accretion; and Zone 3 is characterised by < 3 m of dominantly sand deposited primarily by lateral point-bar accretion. This unusual downstream sediment coarsening trend, and the associated changes in channel and floodplain character, are independent of sediment inputs from tributaries, and result from a downstream increase in bankfull unit stream power from < 3.5 W m^− 2 (Zone 1) to  4–10 W m^− 2 (Zone 3). Mud is deposited primarily in low-energy Zone 1 but is conveyed in suspension more effectively through higher energy Zones 2 and 3, only forming drapes over sandy lateral accretion deposits during waning flood stages. The downstream increase in unit stream power is controlled in part by a slight downstream increase in floodplain gradient that may be related to a subtle variation in the erosional resistance of the bedrock underlying the channel bed. These findings add to previous work on meandering rivers by demonstrating that mud-dominated meanders can occur in long-term erosional settings where the channel bed is grounded on bedrock, and that downstream fining trends may be reversed locally.     

Distributions of dissolved and particulate biogenic thiols in the subartic Pacific Ocean

Dissolved and particulate concentrations of the biogenic thiols cysteine (Cys), arginine–cysteine (Arg–Cys), glutamine–cysteine (Gln–Cys), γ-glutamate–cysteine (γ-Glu–Cys) and glutathione (GSH) were measured in the subartic Pacific Ocean in the summer of 2003 using high performance liquid chromatography (HPLC) with precolumn derivatization as reported in previous work. In this study, a preconcentration protocol for the derivatized thiols was utilized to extend detection limits of dissolved thiols to picomolar levels. The measured concentrations of particulate and dissolved thiols were uncoupled, with distinctive depth profiles and large differences in the particulate to dissolved ratios between individual compounds. Glutathione was the most abundant particulate thiol whereas the most abundant dissolved thiol was γ-Glu–Cys, with concentrations as high as 15 nM. Given the relatively small pool of intracellular γ-Glu–Cys and the very low dissolved concentrations of GSH, we hypothesize that glutathione released from cells is rapidly converted to the potentially degradation resistant γ-Glu–Cys outside the cell. The relatively high concentrations of other dissolved thiols compared to particulate concentrations implies both biological exudation and slow degradation rates. Some thiols appear to vary with changes in nutrient availability but this effect is difficult to decouple from changes in community structure inferred from pigment analyses. Dissolved thiol concentrations also exceed typical metal concentrations in the subartic Pacific, supporting previous arguments that they may be important in metal speciation.     

An Integrated Mapping Approach to Petroleum Exploration on the Pratt Anticline,Pratt County,Kansas

A quantitative map comparison/integration technique to aid in petroleum exploration was applied to an area in south-central Kansas. The visual comparison and integration of maps has become increasingly difficult with the large number and different types of maps necessary to interpret the geology and assess the petroleum potential of an area; therefore, it is desirable to quantify these relationships. The algebraic algorithm used in this application is based on a point-by-point comparison of any number and type of spatial data represented in map form. Ten geological and geophysical maps were compared and integrated, utilizing data from 900 wells located in a nine-township area on the Pratt Anticline in Pratt County, Kansas. Five structure maps, including top of the Lansing Group (Pennsylvanian), Mississippian chert, Mississippian limestone, Viola Limestone (Ordovician), and Arbuckle Group (Cambro-Ordovician), two isopachous maps from top of Mississippian chert to Viola and Lansing to Arbuckle, a Mississippian chert porosity map, Bouguer gravity map, and an aeromagnetic map were processed and interpreted. Before processing, each map was standardized and assigned a relative degree of importance, depending on knowledge of the geology of the area. Once a combination of weights was obtained that most closely resembled the pattern of proved oil fields (target map), a favorability map was constructed based on a coincidence of similarity values and of geological properties of petroleum reservoirs. The resulting favorability maps for the study area indicate location of likely Mississippian chert and lower Paleozoic production.     

Real-time storm detection and weather forecast activation through data mining and events processing

Each year across the USA, destructive weather events disrupt transportation and commerce, resulting in both loss of lives and property. Mitigating the impacts of such severe events requires innovative new software tools and cyberinfrastructure through which scientists can monitor data for specific severe weather events such as thunderstorms and launch focused modeling computations for prediction and forecasts of these evolving weather events. Bringing about a paradigm shift in meteorology research and education through advances in cyberinfrastructure is one of the key research objectives of the Linked Environments for Atmospheric Discovery (LEAD) project, a large-scale, interdisciplinary NSF funded project spanning ten institutions. In this paper we address the challenges of making cyberinfrastructure frameworks responsive to real-time conditions in the physical environment driven by the use cases in mesoscale meteorology. The contribution of the research is two-fold: on the cyberinfrastructure side, we propose a model for bridging between the physical environment and e-Science¹ workflow systems, specifically through events processing systems, and provide a proof of concept implementation of that model in the context of the LEAD cyberinfrastructure. On the algorithmic side, we propose efficient stream mining algorithms that can be carried out on a continuous basis in real time over large volumes of observational data. ¹ e-Science is used to describe computationally intensive science that is typically carried out in highly distributed network     

Skills in Professional Geography: An Assessment of Workforce Needs and Expectations

This study compares the skills of professional geographers and the needs of employer organizations across major sectors of the U.S. workforce. Following a series of focus groups, two surveys were developed to explore: (1) the extent to which specific skills were performed by geographers in different professional positions, and (2) the value of and anticipated demand for those skills from the perspective of employers. Overall, respondents in the focus groups and both surveys emphasized the need for general skills ranging from time management and writing ability to information management and computer literacy. Employers also cited many geographic skills as being vital for enhancing the work of professionals in all types of organizations. Competency in field methods, the ability to work across disciplinary boundaries, and spatial thinking were three skill areas that characterized the work of geographic professionals irrespective of specialty.     

Potential climate-change impacts on the Chesapeake Bay

We review current understanding of the potential impact of climate change on the Chesapeake Bay. Scenarios for CO₂ emissions indicate that by the end of the 21^st century the Bay region will experience significant changes in climate forcings with respect to historical conditions, including increases in CO₂ concentrations, sea level, and water temperature of 50–160%, 0.7–1.6 m, and 2–6 °C, respectively. Also likely are increases in precipitation amount (very likely in the winter and spring), precipitation intensity, intensity of tropical and extratropical cyclones (though their frequency may decrease), and sea-level variability. The greatest uncertainty is associated with changes in annual streamflow, though it is likely that winter and spring flows will increase. Climate change alone will cause the Bay to function very differently in the future. Likely changes include: (1) an increase in coastal flooding and submergence of estuarine wetlands; (2) an increase in salinity variability on many time scales; (3) an increase in harmful algae; (4) an increase in hypoxia; (5) a reduction of eelgrass, the dominant submerged aquatic vegetation in the Bay; and (6) altered interactions among trophic levels, with subtropical fish and shellfish species ultimately being favored in the Bay. The magnitude of these changes is sensitive to the CO₂ emission trajectory, so that actions taken now to reduce CO₂ emissions will reduce climate impacts on the Bay. Research needs include improved precipitation and streamflow projections for the Bay watershed and whole-system monitoring, modeling, and process studies that can capture the likely non-linear responses of the Chesapeake Bay system to climate variability, climate change, and their interaction with other anthropogenic stressors.