Controls on accumulation of a volcaniclastic fan,Ruapehu composite volcano,New Zealand

The Whangaehu fan is the youngest sedimentary component on the eastern ring plain surrounding Ruapehu volcano. Fan history comprises constructional (830–200 years bp) and dissectional (<200 years bp) phases. The constructional phase includes four aggradational periods associated with both syneruptive and inter-eruptive behavior. All four aggradational periods began when deposition by large lahars changed flow conditions on the fan from channelized to unchannelized. Subsequent behavior was a function of the rate of sediment influx to the fan. The rate of sediment influx, in turn, was controlled by frequency and magnitude of volcanic eruptions, short-term climate change, and the amount of sediment stored on the volcano flanks. Fanwide aggradation occurred when rates of sediment influx and deposition on the fan were high enough to maintaìn unchannelized flow conditions on the fan surface. Maintenance of an undissected surface required sedimentation from frequent and large lahars that prevented major dissection between events. These conditions were best met during major eruptive episodes when high frequency and magnitude eruptions blanketed the volcano flanks with tephra and rates of lahar initiation were high. During major eruptive episodes, volcanism is the primary control on sedimentation. Climatic variations do not influence sediment accumulation. Local aggradation occurred when lahars were too small to maintain unchannelized flow across the entire fan. In this case, only the major channel system received much sediment following the deposition from the initial lahar. This localized aggradation occurred if (1) the sediment reservoir on the flank was large enough for floods to bulk into debris flows and (2) sedimentation events were frequent enough to maintain sediment supply to only some parts of the fan. These conditions were met during both minor eruptive and inter-eruptive episodes. In both cases, a large sediment reservoir remained on the volcano flanks from previous major eruptive intervals. Periods of increased storm activity produced floods that bulked to relatively small debris flows. When the sediment reservoir was depleted, the fan entered the present dissectional phase. Syneruptive and noneruptive lahars are mostly channelized and sediment bypasses the fan. Fan deposits are rapidly reworked. This is the present case at Ruapehu, even though the volcano is in a minor eruptive episode and the climate favors generation of intense storm floods.     

A novel method to infer historical DDT use on Cape Cod,Massachusetts (USA), based on ΣDDT degradation and <Superscript>210</Superscript>Pb dating in lake sediment cores

Glacier shrinkage and melting of snow patches caused by the current phase of warming is having a profound impact on lake ecosystems located in glacierized environments at high altitude and/or latitude because it alters the hydrology and the physico-chemistry of the river discharges and catchment runoff. These changes, in turn, have a major impact on the biota of these lakes. In this study, we combined geochemical and diatom analyses of a sediment core retrieved from Lake Kanas (N.W. China) to assess how climate change has affected this ecosystem over the past ~ 100 years. Our results show that the aquatic ecosystem of Lake Kanas was sensitive to changes in the regional climate over that period of time. The lake has been affected by change in hydrology (e.g. influx of glacier meltwater, variations in precipitation) and change in hydrodynamics (water column stability). The variations in abundance and composition of the diatom assemblages observed in the sedimentary record have been subtle and are complex to interpret. The principal changes in the diatom community were: (1) a rise in diatom accumulation rates starting in the AD 1970s that is coeval with changes observed in temperate lakes of the Northern Hemisphere and (2) an increase in species diversity and assemblage turnover and a faster rate-of-change since ~ AD 2000. The diatom community is expected to change further with the projected melting of the Kanas glacier throughout the twenty-first century.     

Blended head analyses to reduce uncertainty in packer testing in fractured-rock boreholes

Open boreholes in fractured rock often cross-connect fractures with differing hydraulic head and the head differences between these fractures cause vertical flow in the water column. This cross-connection has potential to bias transmissivity (T) values obtained from straddle packer tests. This study demonstrates how measurements of the blended head in the open-hole segments above and below the straddle-packer test interval can be used to correct packer tests for cross-connection effects. A pressure response observed in the open-hole segment above and/or below the packers isolating a test interval during a hydraulic test indicates short-circuiting of water from the injection interval through the vertically connected fracture network to the open-hole segments, resulting in the overestimation of T. A method is presented using blended head concepts to minimize this error using a trial-and-error procedure to determine the short-circuiting flow rate to account for the head conditions in the open-hole segments during each hydraulic test. Observed differences between the measured head and the calculated blended head in the open-hole segments above and below the test interval are attributed to cross-connection effects around the 1-m-long packers. The head and corrected T values determined from packer tests are used to estimate the flow in and out of the open hole at each of the intervals tested for assessing the cross-connection effects under open borehole conditions. Understanding open-hole flow dynamics gives insight about the potential for vertical cross connection of chemical constituents caused by the open hole.     

Pliocene export production and terrigenous provenance of the Southern Cape Basin, southwest African margin

We have analyzed 33 Pliocene bulk sediment samples from Ocean Drilling Program Site 1085 in the Cape Basin, located offshore of western Africa in the Angola–Benguela Current system, for 17 major and trace elements, and interpreted their associations and temporal variations in the context of an allied data set of CaCO₃, opal, and C_org. We base our interpretations on elemental ratios, accumulation rates, inter-element correlations, and several multi-element statistical techniques. On the basis of qualitative assessment of downhole changes in the distributions of P and Ba, utilized as proxies of export production, we conclude that highs in bulk and biogenic accumulation that occur at 3.2 Ma, 3.0 Ma, 2.4 Ma, and 2.25 Ma were caused by increases in export production as well as terrigenous flux, and record a greater sequestering of organic matter during these time periods. Studies of refractory elements and other indicator proxies (SiO₂, Al₂O₃, TiO₂, Fe₂O₃, MgO, V, Cr, Sr, and Zr) strongly suggest that the terrigenous component of the bulk sediment is composed of two compositional end-members, one being ‘basaltic’ in composition and the other similar to an ‘average shale’. The basaltic end-member comprises approximately 10–15% of the total bulk sediment and its presence is consistent with the local geology of source material in the drainage basin of the nearby Orange River. The increase in bulk accumulation at 2.4 Ma appears to reflect a greater relative increase in basaltic input than the relative increase in shale-type input. Although studies such as this cannot precisely identify the transport mechanisms of the different terrigenous components, these results are most consistent with variations in sea level (and associated changes in shelf geometry and fluvial input) being responsible for the changing depositional conditions along the Angolan Margin during this time period.     

A multidisciplinary-based conceptual model of a fractured sedimentary bedrock aquitard: improved prediction of aquitard integrity

A hydrogeologic conceptual model that improves understanding of variability in aquitard integrity is presented for a fractured sedimentary bedrock unit in the Cambrian-Ordovician aquifer system of midcontinent North America. The model is derived from multiple studies on the siliciclastic St. Lawrence Formation and adjacent strata across a range of scales and geologic conditions. These studies employed multidisciplinary techniques including borehole flowmeter logging, high-resolution depth-discrete multilevel well monitoring, fracture stratigraphy, fluorescent dye tracing, and three-dimensional (3D) distribution of anthropogenic tracers regionally. The paper documents a bulk aquitard that is highly anisotropic because of poor connectivity of vertical fractures across matrix with low permeability, but with ubiquitous bed parallel partings. The partings provide high bulk horizontal hydraulic conductivity, analogous to aquifers in the system, while multiple preferential termination horizons of vertical fractures serve as discrete low vertical hydraulic conductivity intervals inhibiting vertical flow. The aquitard has substantial variability in its ability to protect underlying groundwater from contamination. Across widespread areas where the aquitard is deeply buried by younger bedrock, preferential termination horizons provide for high aquitard integrity (i.e. protection). Protection is diminished close to incised valleys where stress release and weathering has enhanced secondary pore development, including better connection of fractures across these horizons. These conditions, along with higher hydraulic head gradients in the same areas and more complex 3D flow where the aquitard is variably incised, allow for more substantial transport to deeper aquifers. The conceptual model likely applies to other fractured sedimentary bedrock aquitards within and outside of this region.     

Chemical evolution of an inland sabkha: a case study from Sabkha Matti,Saudi Arabia

Hydrogeology Journal - Sabkha Matti is a potential discharge point for regional groundwater systems in the Rub’ al Khali topographic basin of Saudi Arabia. The hydrogeochemical evolution of...     

Topographic variation in soil erosion and accumulation determined with meteoric 10Be

Understanding natural soil redistribution processes is essential for measuring the anthropogenic impact on landscapes. Although meteoric beryllium-10 (¹⁰Be) has been used to determine erosion processes within the Pleistocene and Holocene, fewer studies have used the isotope to investigate the transport and accumulation of the resulting sediment. Here we use meteoric ¹⁰Be in hilltop and valley site soil profiles to determine sediment erosion and deposition processes in the Christina River Basin (Pennsylvania, USA). The data indicate natural erosion rates of 14 to 21 mm 10⁻³ yr and soil ages of 26 000 to 57 000 years in hilltop sites. Furthermore, valley sites indicate an alteration in sediment supply due to climate change (from the Pleistocene to the Holocene) within the last 60 000 years and sediment deposition of at least 0.5–2 m during the Wisconsinan glaciation. The change in soil erosion rate was most likely induced by changes in geomorphic processes; probably solifluction and slope wash during the cold period, when ice advanced into the mid latitudes of North America. This study shows the value of using meteoric ¹⁰Be to determine sediment accumulation within the Quaternary and quantifies major soil redistribution occurred under natural conditions in this region. © 2018 John Wiley & Sons, Ltd.     

Characterization and Source History Modeling Using Low‐k Zone Profiles at Two Source Areas

Like tree rings, high‐resolution soil sampling of low‐permeability (low‐k) zones can be used to evaluate the style of source history at contaminated sites (i.e., historical pattern of concentration and composition vs. time since releases occurred at the interface with the low‐k zone). This is valuable for the development of conceptual site model (CSM) and can serve as an important line of evidence supporting monitored natural attenuation (MNA) as a long‐term remedy. Source histories were successfully reconstructed at two sites at Naval Air Station Jacksonville using a simple one‐dimensional (1D) model. The plume arrival time and historical composition were reconstructed from the time initial releases that were suspected to occur decades earlier. At the first site (Building 106), the source reconstructions showed relatively constant source concentrations, but significant attenuation over time in the downgradient plume in the transmissive zone, suggesting MNA may not be an appropriate remedy if source control is a requirement, but attenuation processes are clearly helping to maintain plume stability and reduce risk. At the second site (Building 780), source concentrations in the transmissive zone showed an approximately a one order of magnitude over time, but apparently less attenuation in the downgradient plume. The source reconstruction method appeared to reflect site remediation efforts (excavation, soil vapor extraction) implemented in the 1990s. Finally, a detailed analysis using molecular biological tools, carbon isotopes, and by‐products suggests that most degradation activity is associated with high‐k zones but not with low‐k zones at these source areas. Overall, the source reconstruction methodology provided insight into historical concentration trends not obtainable otherwise given the limited long‐term monitoring data.     

Visible–near infrared spectral indices for mapping mineralogy and chemistry with OSIRIS‐REx

The primary objective of the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS‐REx) mission is to return to Earth a pristine sample of carbonaceous material from the primitive asteroid (101955) Bennu. To support compositional mapping of Bennu as part of sample site selection and characterization, we tested 95 spectral indices on visible to near infrared laboratory reflectance data from minerals and carbonaceous meteorites. Our aim was to determine which indices reliably identify spectral features of interest. Most spectral indices had high positive detection rates when applied to spectra of pure, single‐component materials. The meteorite spectra have fewer and weaker absorption features and, as a result, fewer detections with the spectral indices. Indices targeting absorptions at 0.7 and 2.7–3 μm, which are attributable to hydrated minerals, were most successful for the meteorites. Based on these results, we identified a set of 17 indices that are most likely to be useful at Bennu. These indices detect olivines, pyroxenes, carbonates, water/OH‐bearing minerals, serpentines, ferric minerals, and organics. Particle size and albedo are known to affect band depth but had a negligible impact on interpretive success with spectral indices. Preliminary analysis of the disk‐integrated Bennu spectrum with these indices is consistent with expectations given the observed absorption near 3 μm. Our study prioritizes spectral indices to be used for OSIRIS‐REx spectral analysis and mapping and informs the reliability of all index‐derived data products, including a science value map for sample site selection.