The Ms = 6.2, June 15, 1995 Aigion earthquake (Greece): evidence for low angle normal faulting in the Corinth rift

We present the results of a multidisciplinary study of the M_s = 6.2, 1995, June 15, Aigion earthquake (Gulf of Corinth, Greece). In order to constrain the rupture geometry, we used all available data from seismology (local, regional and teleseismic records of the mainshock and of aftershocks), geodesy (GPS and SAR interferometry), and tectonics. Part of these data were obtained during a postseismic field study consisting of the surveying of 24 GPS points, the temporary installation of 20 digital seismometers, and a detailed field investigation for surface fault break. The Aigion fault was the only fault onland which showed detectable breaks (< 4 cm). We relocated the mainshock hypocenter at 10 km in depth, 38 ° 21.7 N, 22 ° 12.0 E, about 15 km NNE to the damaged city of Aigion. The modeling of teleseismic P and SH waves provides a seismic moment M_o = 3.4 10¹⁸ N.m, a well constrained focal mechanism (strike 277 °, dip 33 °, rake – 77°), at a centroidal depth of 7.2 km, consistent with the NEIC and the revised Harvard determinations. It thus involved almost pure normal faulting in agreement with the tectonics of the Gulf. The horizontal GPS displacements corrected for the opening of the gulf (1.5 cm/year) show a well-resolved 7 cm northward motion above the hypocenter, which eliminates the possibility of a steep, south-dipping fault plane. Fitting the S-wave polarization at SERG, 10 km from the epicenter, with a 33° northward dipping plane implies a hypocentral depth greater than 10 km. The north dipping fault plane provides a poor fit to the GPS data at the southern points when a homogeneous elastic half-space is considered: the best fit geodetic model is obtained for a fault shallower by 2 km, assuming the same dip. We show with a two-dimensional model that this depth difference is probably due to the distorting effect of the shallow, low-rigidity sediments of the gulf and of its edges. The best-fit fault model, with dimensions 9 km E–W and 15 km along dip, and a 0.87 m uniform slip, fits InSAR data covering the time of the earthquake. The fault is located about 10 km east-northeast to the Aigion fault, whose surface breaks thus appears as secondary features. The rupture lasted 4 to 5 s, propagating southward and upward on a fault probably outcropping offshore, near the southern edge of the gulf. In the shallowest 4 km, the slip – if any – has not exceeded about 30 cm. This geometry implies a large directivity effect in Aigion, in agreement with the accelerogram aig which shows a short duration (2 s) and a large amplitude (0.5 g) of the direct S acceleration. This unusual low-angle normal faulting may have been favoured by a low-friction, high pore pressure fault zone, or by a rotation of the stress directions due to the possible dip towards the south of the brittle-ductile transition zone. This fault cannot be responsible for the long term topography of the rift, which is controlled by larger normal faults with larger dip angles, implying either a seldom, or a more recently started activity of such low angle faults in the central part of the rift.     

GPS network monitors the Western Alps' deformation over a five-year period: 1993–1998

  The Western Alps are among the best studied collisional belts with both detailed structural mapping and also crustal geophysical investigations such as the ECORS and EGT seismic profile. By contrast, the present-day kinematics of the belt is still largely unknown due to small relative motions and the insufficient accuracy of the triangulation data. As a consequence, several tectonic problems still remain to be solved, such as the amount of N–S convergence in the Occidental Alps, the repartition of the deformation between the Alpine tectonic units, and the relation between deformation and rotation across the Alpine arc. In order to address these problems, the GPS ALPES group, made up of French, Swiss and Italian research organizations, has achieved the first large-scale GPS surveys of the Western Alps. More than 60 sites were surveyed in 1993 and 1998 with a minimum observation of 3 days at each site. GPS data processing has been done by three independent teams using different software. The different solutions have horizontal repeatabilities (N–E) of 4–7 mm in 1993 and 2–3 mm in 1998 and compare at the 3–5-mm level in position and 2-mm/yr level in velocity. A comparison of 1993 and 1998 coordinates shows that residual velocities of the GPS marks are generally smaller than 2 mm/yr, precluding a detailed tectonic interpretation of the differential motions. However, these data seem to suggest that the N–S compression of the Western Alps is quite mild (less than 2 mm/yr) compared to the global convergence between the African and Eurasian plate (6 mm/yr). This implies that the shortening must be accomodated elsewhere by the deformation of the Maghrebids and/or by rotations of Mediterranean microplates. Also, E–W velocity components analysis supports the idea that E–W extension exists, as already suggested by recent structural and seismotectonic data interpretation. Received: 27 November 2000 / Accepted: 17 September 2001     

Cumulate gabbros from the Southwest Indian Ridge, 54°S-7° 16′ E: implications for magmatic processes at a slow spreading ridge

A diverse volcanic and plutonic rock suite was recovered from the center of the 80 km long ridge segment of the Southwest Indian Ridge (54°S, 7°16 E) between the Islas Orcadas and Shaka Fracture Zones. The cumulus nature of the gabbroic rocks in the suite is indicated by phase, modal and cryptic layering, igneous lamination, and low incompatible element abundances. We present a mass-balance model for calculating the proportions and compositions of cumulus phases and crystallized intercumulus liquid from bulk-rock major element compositions. The model is based on the ability to define a compositional array of basaltic liquids and on the assumption that cumulus minerals are initially in equilibrium with trapped liquid. Calculated proportions of trapped liquid range from 3%–15%; values that are characteristic of adcumulates to mesocumulates. Models of postcumulus crystallization indicate significant enrichments of incompatible elements and buffering of compatible elements in residual trapped liquids, thus explaining the high TiO₂ contents observed in magnesian clinopyroxenes. Cumulus phase assemblages and compositions suggest solidification in shallow level magma chambers, but disequilibrium plagioclase compositions suggest some crystallization at greater depth. Furthermore, basalt compositions projected onto the olivine-clinopyroxenequartz pseudoternary suggest magma generation over a range of pressures (from less than 10 to greater than 20 kb) as well as polybaric fractional crystallization. We suggest that the Southwest Indian Ridge is characterized by low magma supply with small batches of melt that either ascend directly to the surface having undergone limited polybaric crystallization or are trapped in shallow crustal magma chambers where they evolve and solidify to form cumulate gabbros. The adcumulus nature of the gabbros investigated here suggests slow cooling rates typical of large intrusions implying relatively large, but ephemeral magma chambers below segments of the Southwest Indian Ridge.     

Fluvial incisions in the North‐Western Pyrenees (Aspe Valley): Dissection of a former planation surface and some tectonic implications

Dissected remnants of a high elevation low relief surface (HELRS) are encountered all along the Pyrenean range. All authors agree that the HELRS was shaped during the post‐shortening evolution of the belt, but doubt remains on its original elevation. Notably, whether a post‐shortening uplift event occurred after the generation of the Pyrenean planation surface is still debated. Based on a geomorphological study of the entrenchment of the Aspe River in the North‐Western Pyrenees, we describe a post‐Oligocene multi‐stage dissection of the HELRS linked to a regional post‐shortening uplift. Each incision stage is recorded by erosional triangular facets and associated stepped remnants of former smooth topographies. Compared analysis of patterns of incision in the Axial Zone and its northern border allows to evidence differential vertical motions. We discuss the forcing mechanism(s) that controlled this morphological evolution.     

Backward modeling of the rifting kinematics in the Upper Rhine Graben: insights from an elastic-perfect contact law on the restoration of a multi-bloc domain

This paper addresses the problem of volume restoration for 3-D sedimentary basin kinematic deformation. The primary purpose is methodological and concerns the use of contact mechanics with the finite element method, in order to deform a geological multi-bloc domain. This approach is applied to backward model the later stage of rifting of a segment of the southern Upper Rhine Graben (France–Germany border). Preliminary results from our modeling demonstrate the ability of the method not only to handle complex geometries, but also to successfully perform retro-deformation of a complex geological domain. In addition, they provide or confirm crucial information on the rifting evolution and tectonic features of this segment of the Upper Rhine Graben, such as the distribution of deformation, the asymmetry of the graben and a significant left-lateral strike-slip component of displacement.     

Formation of U-depleted rhyolite from a basanite at El Hierro, Canary Islands

Phonolite and trachyte are the felsic magmas of the alkaline magma suites, which characterize the Canary Islands. The October 2011 submarine eruption off El Hierro, the westernmost island, nevertheless, produced a small volume of rhyolitic magma. The rhyolite occurred as highly vesicular, white coloured pumices enveloped in and mingled with darker coloured basanitic pumice. The basanitic pumice is relatively crystal poor with a few euhedral olivines (mostly Fo_77–79), clinopyroxenes and Fe-rich spinels, whereas very rare olivine of same composition is found together with equally rare Fe-sulphide and FeTi-rich oxides in the rhyolite. The Fe–Mg exchange equilibrium in the oxides permits to calculate an equilibrium temperature of 970–890 °C for the rhyolite, in agreement with quartz-melt equilibrium at ca. 930 °C. A striking mineralogical feature of the rhyolite is the presence of rounded to contorted grains of milky quartz, which are xenocrysts incorporated and partly dissolved into the magma. Analyses of residual volatile concentrations in the glasses show that the rhyolite melt was highly degassed, whereas the basanitic glass still has important halogen concentrations. Trace element patterns of the mafic glasses and their elevated incompatible element concentrations are typical of the western Canary Island basanites. In contrast, the trace element composition of the rhyolite shows surprisingly low concentrations for all elements except the most incompatible ones (e.g. Rb, Ba, K and Th). All other measured LILE, HFSE and REE have significantly lower concentration than the basanitic counterpart that can be explained by fractionation of accessory phases (1 % apatite, 1 % sphene and 0.1 % zircon). Surprisingly, low U concentration is presumably related to elevated oxygen fugacity in the rhyolite, causing U to be in a hexavalent state, and fluxing of F-rich gas leading to volatilization of UF₆, known to emanate at low temperature. The results suggest that a gas-rich basanitic melt remobilized a small volume of stagnant rhyolitic melt formed by incorporation of approximately 10 % quartz-rich sediment into a late differentiate of trachytic composition. Sediments at the interface of an old oceanic crust adjacent to a continental shield and younger volcanic island are likely to act as magma traps were sediment assimilation may alter the mantle-derived magma composition. Quartz assimilation thus explains the production of rhyolite magma in a volcanic island characterized by an alkaline magma series from primitive basanites to trachytes.     

Cycle anatomy and variability in the storm-dominated type cincinnatian (Upper Ordovician): coming to grips with cycle delineation and genesis

Although parasequence and sequence are scale-independent terms, they are frequently applied only to specific scales of cycles. For example, meter-scale cycles are commonly assumed to be parasequences or PACs. In the Upper Ordovician Kope and Fairview Formations of northern Kentucky, we examined a succession of 50 meter-scale cycles that have been variously interpreted as deepening-upward, shallowing-upward, or showing no relationship with water depth. Our analysis shows that these cycles, characterized by shifts in storm-bed proximality, are highly variable in their thickness and internal construction. Most cycles are best considered high-frequency sequences, because deepening-upward intervals are common, and many cycles contain evidence of abrupt basinward shifts in facies as expected at sequence boundaries. A minority fit the parasequence model of shallowing-upward cycles bounded by flooding surfaces. Larger, 20 m scale cycles are defined by systematic thickening and thinning trends of meter-scale cycles. However, meter-scale cycles do not display any systematic trends in cycle anatomy as a function of position within the 20 m cycles or position within the Kope and Fairview Formations. The high cycle variability and the lack of systematic stratigraphic organization with respect to longer-term cyclicity reflect either the irregularity of relative sea-level changes, the poor recording of sea-level changes in this deep-water setting, or the generation of these cycles by climate-induced cyclicity in storm intensity. These three mechanisms would generate similar patterns at the outcrop scale, so it is not possible at the present to distinguish between them.     

Site effects of the Roio basin, L��Aquila

During the microzonation studies of the April 6th, 2009 L??Aquila earthquake, we observed local seismic amplifications in the Roio area??a plane separated from L??Aquila city center by mount Luco. Six portable, digital instruments were deployed across the plain from 15 April to mid-May 2009. This array recorded 152 aftershocks. We analyzed the ground motion from these events to determine relative site amplification within the plain and on surrounding ridges. Horizontal over vertical spectral ratio on noise data (HVSRN), aftershock recordings (HVEQ) and standard spectral ratio (SSR) showed amplifications at 1.3 and 4.0?Hz on quaternary deposits. Seismic amplifications in the frequency range of 4 and 6?Hz were also observed on a carbonate ridge of Colle di Roio, on the northwestern border of the plateau. A small amplification was noticed near the top of mount Luco, another rocky site. Large discrepancies in the amplification levels between methods have been observed for these sites, but the HVSRN, HVEQ and SSR gave similar results at the stations located in the Roio plain. On the rocky sites, the SSR was more reliable than the HVSRN at estimating the transfer function of the site, even if the resonance frequency seemed to be well detected by the latter method.