Zircon U–Pb geochronology of Ordovician magmatism in the polycyclic Ruitor Massif (Internal W Alps)

Among the Middle Penninic basements of the Internal NW-Alps, the Ruitor massif shows the best preserved remnants of pre-Permian metamorphic rocks. Their Barrovian-type mineral associations are somewhat masked by the greenschist to blueschist Alpine metamorphism of Tertiary age. Four Ruitor gneisses have been analysed, showing geochemical characters of granitoids from orogenic zones. Zircon morphology also suggests magmatic protoliths and a crustal source; some of the morphological zircon types suggest anatectic granites. The first U-Pb ages on zircon for this massif have been obtained concurrently through conventional multigrain and ion microprobe dating. Two metavolcanic rocks at 471LJ and 468ᆪ Ma could be slightly older than the porphyritic augen gneisses at 465ᆟ and 460lj Ma. Regional data from the other Internal basement massifs suggest that the Variscan event is poorly recorded, except in Ruitor-type units. Ruitor and Sapey gneisses belonged to the same unit (Nappe des Pontis), which was affected by a 480-450-Ma event including volcanism and anatexis and ended with a late calc-alkaline granite emplacement at 460-450 Ma. The distribution of Variscan basement units roughly parallels Alpine zonation.     

Enigmatic diamonds in Archean calc-alkaline lamprophyres of Wawa, southern Ontario, Canada

A suite of 80 macrodiamonds recovered from volcaniclastic breccia of Wawa (southern Ontario) was characterized on the basis of morphology, nitrogen content and aggregation, cathodoluminescence (CL), and mineral inclusions. The host calc-alkaline lamprophyric breccias were emplaced at 2.68–2.74 Ga, contemporaneously with voluminous bimodal volcanism of the Michipicoten greenstone belt. The studied suite of diamonds differs from the vast majority of diamond suites found worldwide. First, the suite is hosted by calc-alkaline lamprophyric volcanics rather than by kimberlite or lamproite. Second, the host volcanic rock is amongst the oldest known diamondiferous rocks on Earth, and has experienced regional metamorphism and deformation. Finally, most diamonds show yellow-orange-red CL and contain mineral inclusions not in equilibrium with each other or their host diamond. The majority of the diamonds in the Wawa suite are colorless, weakly resorbed, octahedral single crystals and aggregates. The diamonds contain 0–740 ppm N and show two modes of N aggregation at 0–30 and 60–95% B-centers suggesting mantle storage at 1,100–1,170°C. Cathodoluminescence and FTIR spectroscopy shows that emission peaks present in orange CL stones do not likely result from irradiation or single substitutional N, in contrast to other diamonds with red CL. The diamonds contain primary inclusions of olivine (Fo₉₂ and Fo₈₉), omphacite, orthopyroxene (En₉₃), pentlandite, albite, and An-rich plagioclase. These peridotitic and eclogitic minerals are commonly found within single diamonds in a mixed paragenesis which also combines shallow and deep phases. This apparent disequilibrium can be explained by effective small-scale mixing of subducted oceanic crust and mantle rocks in fast “cold” plumes ascending from the top of the slabs in convergent margins. Alternatively, the diamonds could have formed in the pre-2.7–2.9 Ga cratonic mantle and experienced subsequent alteration of syngenetic inclusions related to host magmatism and ensuing metamorphism. Neither orogenic nor cratonic model of the diamond origin fully explains all of the observed characteristics of the diamonds and their host rocks. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

In situ and laboratory investigations of fluid flow through an argillaceous formation at different scales of space and time, Tournemire tunnel, southern France

In the context of a research and development program on waste disposal, an experimental site (Tournemire tunnel, Aveyron, France) was selected by the French Institute for Nuclear Protection and Safety (IPSN) in order to undertake studies on potential fluid flow at different scales of space and time within a 250-m-thick argillaceous formation. The argillite has a low natural water content (~3–5%) and very low radii access porosity. Diffusion (tritiated water) coefficients (1×10^–12 to 2×10^–11 m²/s) and hydraulic conductivities derived from different types of laboratory tests (10^–14 to 10^–13 m/s) are characteristics of a very low-permeable rock. In situ hydraulic tests (including long-term hydraulic-head measurements) were used to obtain values for hydraulic head and hydraulic conductivity at a scale of 1–10 m (10^–13 to 10^–11 m/s). Despite uncertainties on these data (due to a scale factor, presence of fissures, and possible artefacts due to hydro-chemo-mechanical coupling), it is expected that fluid flow is essentially governed by diffusion processes. Identification of possible natural flows at larger scales of time and space was investigated using natural isotopic tracers from interstitial fluids. Modelling, based on the deuterium profile along the clay formation and assuming pure diffusion processes, provides estimations of possible flow times. However, lack of knowledge concerning the past geological evolution of the site and the possible role of a fracture network do not permit reduction of uncertainties on these estimations at this stage. Electronic Publication     

Coupled penetrometer, MBES and ADCP assessments of tidal variations in surface sediment layer characteristics along active subaqueous dunes, Danish Wadden Sea

In-situ geotechnical measurements of surface sediments were carried out along large subaqueous dunes in the Knudedyb tidal inlet channel in the Danish Wadden Sea using a small free-falling penetrometer. Vertical profiles showed a typical stratification pattern with a resolution of ∼1 cm depicting a thin surface layer of low sediment strength and a stiffer substratum below (quasi-static bearing capacity equivalent: 1–3 kPa in the top layer, 20–140 kPa in the underlying sediment; thickness of the top layer ca. 5–8 cm). Observed variations in the thickness and strength of the surface layer during a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter intensity). The results revealed an ebb dominance in sediment remobilization, and a general accretion of the bed towards low water. A loose top layer occurred throughout the tidal cycle, likely influenced by bedload transport and small events of suspended sediment resettlement (thickness: 6 ± 2 cm). Furthermore, this layer showed a significant increase in thickness (e.g. from 8 cm to 16 cm) related to periods of overall deposition. These findings imply that dynamic penetrometers can conveniently serve to (1) quantify potentially mobile sediments by determining the thickness of a loose sediment surface layer, (2) unravel sediment strength development in potentially mobile sediments and (3) identify sediment accumulation. Such data are an important complement and add a new geotechnical perspective during investigations of sediment remobilization processes in highly dynamic coastal environments.     

The stability of sapphirine-quartz and hypersthene-sillimanite-quartz assemblages: an experimental investigation in the system FeO−MgO−Al2O3−SiO2 under H2O and CO2 conditions

Phase relations and mineral chemistry involving the phases garnet (Gt), spinel (Sp), hypersthene (Hy), sapphirine (Sa), cordierite (Cd), sillimanite (Sil) and quartz (Qz) have been experimentally determined in the system FMAS (FeO−MgO−Al₂O₂−SiO₂) under low fO₂ and for various H₂O/CO₂ conditions. Several compositions were studied with 100 (Mg/Mg+Fe) ratio ranging from 64 to 87 with excess quartz and sillimanite. Our data do not show any differences in Gt−Cd stability and composition as a function of H₂O, CO₂ and H₂O−CO₂ (±CH₄) content, in good agreement with a previous experimental study at lower temperature (Aranovich and Podlesskii 1983). At 1,000° C and 11 kbar, under CO₂-saturated conditions, cordierite grew from a crystalline mix unseeded with cordierite. Thus, under water-absent conditions, cordierite will have a high-P stability field in the presence of CO₂. If water has a pressure stabilizing effect on cordierite, then our results would indicate that the effects of H₂O and CO₂ are of the same magnitude at high temperature. Our data support the theoretical P-T grid proposed by Hensen (1986) for high-T metapelites and are largely consistent with the high-temperature experimental data of Hensen and Green (1973). The univariant boundary Gt+Cd=Hy+Sil+Qz, which marks the disappearance of Hy−Sil−Qz assemblages, has a negative dP/dT slope above 1,000° C and a positive one below this temperature. Extrapolation of our data to iron-free systems shows that the high-P breakdown limit of Mg-cordierite has a negative slope in the range 1,025–1,300° C and probably positive below 1,000° C. This indicates a maximum of stability for Mg-cordierite at around 1,000° C and 13 kbar. Because of the curvature of the univariant reactions En+Sil=Py+Qz, Mg−Cd=En+Sil+Qz and Gt+Cd=Hy+Sil+Qz, the iron-free invariant point involving the phases Py, En, Cd, Sil and Qz probably does not exist. Sapphirine—Qz-bearing assemblages are stable only at temperatures above 1,050° C. At 1,075° C, the joint Gt−Sa is stable up to 11 kbar. At higher pressure, garnet, sapphirine and quartz react according to the reaction Gt+Sa+Qz=Hy+Sil. Reequilibrated sapphirines are more aluminous than the theoretical endmember Mg₂Al₄SiO₁₀ due to AlAl=MgSi substitutions [100(Al₂O₃/Al₂O₃+FeO+MgO) in experimental sapphirines ranges from 50.5 to 52.2]. Sapphirine in the assemblage Sa−Cd−Sil−Qz shows a decrease in Al content with decreasing temperature and pressure, such that the alumina isopleths for sapphirine have a slight negative dP/dT slope. A similar decrease in Al content of sapphirine with temperature is also observed in Sa−Sil−Qz assemblages.     

Temporal evolution of sediment supply in Lago Puyehue (Southern Chile) during the last 600 yr and its climatic significance

Short-term climate changes in Southern Chile are investigated by a multi-proxy analysis of a 53-cm-long sedimentary sequence selected among eight short cores retrieved in Lago Puyehue (Chile, 40°S). This core contains a 600-yr-long undisturbed record of paleo-precipitation changes. Two measurement methods for sediment density, organic matter and biogenic silica contents are compared and the most appropriate techniques are selected. Together with aluminium and titanium concentrations, grain size and geochemical properties of the organic matter, these proxies are used to demonstrate paleo-precipitation changes around 40°S. Increase of terrigenous particle supply between A.D. 1490 and A.D. 1700 suggests a humid period. Contemporaneously, δ¹³C data show increasing lake productivity, in response to the high nutrient supply. The A.D. 1700-1900 interval is characterized by a decreasing terrigenous supply and increasing δ¹³C values, interpreted as a drying period. The magnetic susceptibility signal, reflecting the terrigenous/biogenic ratio, demonstrates that similar variations occur in all the undisturbed sedimentary environments of Lago Puyehue. The A.D. 1490-1700 wet period is associated with the onset of the European Little Ice Age (LIA) and interpreted as its local signature. This work supports the fact that the LIA was a global event, not only restricted to the Northern Hemisphere.     

High‐resolution conceptual hydrogeological model of complex basaltic volcanic islands: a Mayotte,Comoros, case study

We present a high‐resolution conceptual hydrogeological model for complex basaltic volcanic islands based on Mayotte Island in the Comoros. Its geological structure and hydrogeological functioning are deduced from a large dataset: geological mapping, geophysics, some forty new boreholes, piezometric data, hydraulic conductivity, hydrochemical data, etc. We describe previously unknown deep cut‐and‐fill palaeovalleys. The resulting conceptual geological and hydrogeological model of the island is very different from the Hawaiian model, in that it lacks a low‐elevation basal aquifer and dyke‐impounded high‐level aquifers. It is closer to the Canary Islands model, which has, however, not yet been described at a high‐resolution scale. It does not have a continuous aquifer, but rather a discontinuous succession of perched aquifers separated by aquicludes and aquitards. This results more from the complex geological structure of the island, which has experienced several phases of volcanism, erosion and weathering, than from its age, but is also a result of the high‐resolution scale of the model. High‐resolution conceptual modelling is now necessary to solve problems of applied geology and hydrogeology.