Analysis of the solid phase stress tensor in multiphase porous media

Conservation equations for mass, momentum, energy, and entropy are formulated for the phases and interfaces of a three‐phase system consisting of a solid and two immiscible fluids. The microscale equations are averaged to the macroscale by integration over a representative elementary volume. Thermodynamic statements for each of the phases and interface entities are also formulated at the microscale and then averaged to the macroscale. This departure from most uses of thermodynamics in macroscale analysis ensures consistency between models and parameters at the two scales. The expressions for the macroscale rates of change of internal energy are obtained by differentiating the derived forms for energy and making use of averaging theorems. These thermodynamic expressions, along with the conservation equations, serve as constraints on the entropy inequality. A linearization of the resulting equations is employed to investigate the theoretical origins of the Biot coefficient that relates the hydrostatic part of the total stress tensor to the normal force applied at the solid surface by the pore fluids. The results here are placed in the context of other formulations and expressions that appear in the literature. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of bed load supply on sediment transport in mountain streams

Mountain streams with their tributary torrents build the upper part of the fluvial network. They are important regarding the transfer of sediment from headwaters to lower basins. Channels are typically steep with wide grain size distributions, ranging from fine sand up to large boulders, and a stabilized bed surface. Mountain streams often are supply-limited with respect to mobile bed load, which needs to be addressed when bed load transport equations are applied to such streams. To better understand supply limitation, laboratory experiments highlighting the effect of bed load supply on incipient motion and bed load transport rate are discussed. Experimental tests were done in which fine bed load was supplied to a previously armored channel bed, with flow conditions ranging from one-third to twice the critical dis-charge for the bed surface. At flows not exceeding the critical discharge, the time series of the bed load transport rate at the downstream model boundary featured consistent patterns which are attributed to distinct phases: (i) a temporal lag, (ii) an equilibrium state, and (iii) a post-supply phase. Bed load transport occurred even at flows distinctly below that for incipient motion of the bed surface. But, with the mass of total bed load outflow approaching the supply amount, the mass did not exclusively consist of supplied grains. The coarser the supplied bed load, the more sediment was mobilized from the bed surface. At higher flows, processes differed. Total bed load outflow exceeded the supply amount and the break-up of the armor layer caused a refining of the bed surface.     

Multitemporal terrestrial laser scanning point clouds for thaw subsidence observation at Arctic permafrost monitoring sites

This paper investigates different methods for quantifying thaw subsidence using terrestrial laser scanning (TLS) point clouds. Thaw subsidence is a slow (millimetre to centimetre per year) vertical displacement of the ground surface common in ice-rich permafrost-underlain landscapes. It is difficult to quantify thaw subsidence in tundra areas as they often lack stable reference frames. Also, there is no solid ground surface to serve as a basis for elevation measurements, due to a continuous moss–lichen cover. We investigate how an expert-driven method improves the accuracy of benchmark measurements at discrete locations within two sites using multitemporal TLS data of a 1-year period. Our method aggregates multiple experts’ determination of the ground surface in 3D point clouds, collected in a web-based tool. We then compare this to the performance of a fully automated ground surface determination method. Lastly, we quantify ground surface displacement by directly computing multitemporal point cloud distances, thereby extending thaw subsidence observation to an area-based assessment. Using the expert-driven quantification as reference, we validate the other methods, including in-situ benchmark measurements from a conventional field survey. This study demonstrates that quantifying the ground surface using 3D point clouds is more accurate than the field survey method. The expert-driven method achieves an accuracy of 0.1 ± 0.1 cm. Compared to this, in-situ benchmark measurements by single surveyors yield an accuracy of 0.4 ± 1.5 cm. This difference between the two methods is important, considering an observed displacement of 1.4 cm at the sites. Thaw subsidence quantification with the fully automatic benchmark-based method achieves an accuracy of 0.2 ± 0.5 cm and direct point cloud distance computation an accuracy of 0.2 ± 0.9 cm. The range in accuracy is largely influenced by properties of vegetation structure at locations within the sites. The developed methods enable a link of automated quantification and expert judgement for transparent long-term monitoring of permafrost subsidence. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

On High-Frequency Topography-Implied Gravity Signals for a Height System Unification Using GOCE-Based Global Geopotential Models

National height reference systems have conventionally been linked to the local mean sea level, observed at individual tide gauges. Due to variations in the sea surface topography, the reference levels of these systems are inconsistent, causing height datum offsets of up to ±1–2 m. For the unification of height systems, a satellite-based method is presented that utilizes global geopotential models (GGMs) derived from ESA’s satellite mission Gravity field and steady-state Ocean Circulation Explorer (GOCE). In this context, height datum offsets are estimated within a least squares adjustment by comparing the GGM information with measured GNSS/leveling data. While the GNSS/leveling data comprises the full spectral information, GOCE GGMs are restricted to long wavelengths according to the maximum degree of their spherical harmonic representation. To provide accurate height datum offsets, it is indispensable to account for the remaining signal above this maximum degree, known as the omission error of the GGM. Therefore, a combination of the GOCE information with the high-resolution Earth Gravitational Model 2008 (EGM2008) is performed. The main contribution of this paper is to analyze the benefit, when high-frequency topography-implied gravity signals are additionally used to reduce the remaining omission error of EGM2008. In terms of a spectral extension, a new method is proposed that does not rely on an assumed spectral consistency of topographic heights and implied gravity as is the case for the residual terrain modeling (RTM) technique. In the first step of this new approach, gravity forward modeling based on tesseroid mass bodies is performed according to the Rock–Water–Ice (RWI) approach. In a second step, the resulting full spectral RWI-based topographic potential values are reduced by the effect of the topographic gravity field model RWI_TOPO_2015, thus, removing the long to medium wavelengths. By using the latest GOCE GGMs, the impact of topography-implied gravity signals on the estimation of height datum offsets is analyzed in detail for representative GNSS/leveling data sets in Germany, Austria, and Brazil. Besides considerable changes in the estimated offset of up to 3 cm, the conducted analyses show that significant improvements of 30–40% can be achieved in terms of a reduced standard deviation and range of the least squares adjusted residuals.     

Making the ecosystem approach operational—Can regime shifts in ecological- and governance systems facilitate the transition?

Effectively reducing cumulative impacts on marine ecosystems requires co-evolution between science, policy and practice. Here, long-term social–ecological changes in the Baltic Sea are described, illustrating how the process of making the ecosystem approach operational in a large marine ecosystem can be stimulated. The existing multi-level governance institutions are specifically set up for dealing with individual sectors, but do not adequately support an operational application of the ecosystem approach. The review of ecosystem services in relation to regime shifts and resilience of the Baltic Sea sub-basins, and their driving forces, points to a number of challenges. There is however a movement towards a new governance regime. Bottom-up pilot initiatives can lead to a diffusion of innovation within the existing governance framework. Top-down, enabling EU legislation, can help stimulating innovations and re-organizing governance structures at drainage basin level to the Baltic Sea catchment as a whole. Experimentation and innovation at local to the regional levels is critical for a transition to ecosystem-based management. Establishing science-based learning platforms at sub-basin scales could facilitate this process.     

Geochemistry and origin of metal,olivine clasts,and matrix in the Dong Ujimqin Qi mesosiderite

Abstract— The Dong Ujimqin Qi mesosiderite is the first recorded fall of a stony‐iron meteorite in China. According to silicate textures and metal composition, this meteorite is classified as a member of subgroup IB. Instrumental neutron activation analyses (INAA) of metals show that the matrix metal has lower concentrations of Os, Ir, Re, and Pt, but higher concentrations of Ni and Au than the 7.5 cm metal nodule present in the meteorite. We attribute these compositional differences to fractional crystallization of molten metal. Studies of olivine clasts show that FeO contents are uniform in individual olivine crystals but are variable for different olivine clasts. Although concentrations of rare earth elements (REEs) change within olivine clasts, they all exhibit a vee‐shaped pattern relative to CI chondrites. The relatively high concentrations of REEs in olivine and the shape of REE patterns require a liquid high in REEs and especially in light REEs. As such a liquid was absent from the region where basaltic and gabbroic clasts formed, mesosiderite olivine must have formed in a part of the differentiated asteroid that is different from the location where other mesosiderite silicate clasts formed.     

Comment on “Glory phenomenon informs of presence and phase state of liquid water in cold clouds” by Anatoly N. Nevzorov

In a recent publication “Glory phenomenon informs of presence and phase state of liquid water in cold clouds” Nevzorov [Nevzorov, A., 2006. Glory phenomenon informs of presence and phase state of liquid water in cold clouds. Atmospheric Research 82, 367–378] claims that “the convincing evidence has been provided that this sort of glory forms as a first-order bow from spherical particles with a refractive index of 1.81–1.82 and diameter over 20 μm”. This is a highly unusual finding because the refractive index of liquid water and ice is between 1.30 and 1.35 in the visible spectral range. The author concludes that “once more corroboration is gained […] of droplets of liquid water in specific phase state referred to amorphous water, or A-water”. Here we show that the phenomena described by the author are easily explained assuming liquid water with a refractive index of 1.33 and a realistic droplet size distribution with an effective radius of around 10 μm. We conclude that this type of observations does not corroborate the existence of amorphous water in the atmosphere. In a recent publication we showed how to quantitatively derive cloud optical thickness, effective droplet radius, and even the width of the size distribution from observations of the glory [Mayer, B., Schröder, M., Preusker, R., Schüller, L., 2004. Remote sensing of water cloud droplet size distributions using the backscatter glory: a case study. Atmospheric Chemistry and Physics 4, 1255–1263].     

Estimating the Impact of Global Change on Flood and Drought Risks in Europe: A Continental, Integrated Analysis

Most studies on the impact of climate change on regional water resources focus on long-term average flows or mean water availability, and they rarely take the effects of altered human water use into account. When analyzing extreme events such as floods and droughts, the assessments are typically confined to smaller areas and case studies. At the same time it is acknowledged that climate change may severely alter the risk of hydrological extremes over large regional scales, and that human water use will put additional pressure on future water resources. In an attempt to bridge these various aspects, this paper presents a first-time continental, integrated analysis of possible impacts of global change (here defined as climate and water use change) on future flood and drought frequencies for the selected study area of Europe. The global integrated water model WaterGAP is evaluated regarding its capability to simulate high and low-flow regimes and is then applied to calculate relative changes in flood and drought frequencies. The results indicate large ‘critical regions’ for which significant changes in flood or drought risks are expected under the proposed global change scenarios. The regions most prone to a rise in flood frequencies are northern to northeastern Europe, while southern and southeastern Europe show significant increases in drought frequencies. In the critical regions, events with an intensity of today's 100-year floods and droughts may recur every 10–50 years by the 2070s. Though interim and preliminary, and despite the inherent uncertainties in the presented approach, the results underpin the importance of developing mitigation and adaptation strategies for global change impacts on a continental scale.