Analysis of the Major Fe Bearing Mineral Phases in Recent Lake Sediments by EXAFS Spectroscopy

Extended X-ray absorption fine structure (EXAFS) spectroscopy and chemical analyses were combined to determine the Fe bearing minerals in recent lake sediments from Baldeggersee (Switzerland). The upper section of a laminated sediment core, deposited under eutrophic conditions, was compared to the lower part from an oligotrophic period. Qualitative analysis of FeK EXAFS agreed well with chemical data: In the oligotrophic section Fe(II)–O and Fe(III)–O specieswere present, whereas a significant fraction of Fe(II)–S sulfides was strongly indicated in the eutrophic part. A statistical analysis was performed by least square fitting of normalized reference spectra. The set of reference minerals included Fe(III) oxides and Fe(II) sulfides, carbonates and phosphates. In the oligotrophic regime no satisfying fit was obtained using the set of reference spectra, indicating that siderite (FeCO₃) was not present in a significant amount in these carbonate-rich sediments. Simulated EXAFS spectra for a(Ca_x, Fe_1-x)CO₃solid solution allowed reconstructing the specificfeatures of the experimental spectra, suggesting that this phase was the dominant Fe carrier in the oligotrophic section of the core. In the eutrophic part, mackinawite was positively identified and represented the dominant Fe(II) sulfide phase. This finding agreed with chemical extraction, which indicated that18–40 mol% of Fe was contained in the acid volatile iron sulfide fraction. EXAFS spectra of the eutrophic section were best fitted by considering the admixture of mackinawite and the Fe–Ca carbonate phase inferred to be predominant in the oligotrophic regime.     

Quartz microstructures developed during non-steady state plastic flow at rapidly decaying stress and strain rate

Synseismic loading to very high stresses (>0.5 GPa) and subsequent creep during stress relaxation in the uppermost plastosphere at temperatures of ca. 300–350 °C, near the lower tip of an inferred once seismically active crustal scale fault, was proposed based on peculiar microstructures identified in rocks exposed over >100 km² in the Sesia Zone, European Western Alps. Here we discuss the conspicuous and highly heterogeneous microstructural record of quartz in disseminated small-scale shear zones. Sub-basal deformation lamellae and arrays of elongate subgrains on the TEM-scale indicate an early stage of glide-controlled deformation at high stresses. Distributed brittle failure is indicated by healed microcracks. Very fine-grained recrystallised aggregates with a pronounced crystallographic preferred orientation reflect intense plastic flow by dislocation creep. Locally, a fine-grained foam microstructure indicates a final stage of static grain growth at low differential stress. For the previously inferred peak stresses of about 0.5 GPa and given temperatures, initial strain rates on the order of 10⁻¹⁰ s⁻¹ are predicted by available flow laws for dislocation creep of quartz. We emphasise the importance of short-term non-steady state deformation in the uppermost plastosphere underlying seismically active upper crust. The related heterogeneous record of quartz is governed by the local stress history at constant temperature.     

A map-view restoration of the Alpine-Carpathian-Dinaridic system for the Early Miocene

A map-view palinspastic restoration of tectonic units in the Alps, Carpathians and Dinarides reveals the plate tectonic configuration before the onset of Miocene to recent deformations. Estimates of shortening and extension from the entire orogenic system allow for a semi-quantitative restoration of translations and rotations of tectonic units during the last 20 Ma. Our restoration yielded the following results: (1) The Balaton Fault and its eastern extension along the northern margin of the Mid-Hungarian Fault Zone align with the Periadriatic Fault, a geometry that allows for the eastward lateral extrusion of the Alpine-Carpathian-Pannonian (ALCAPA) Mega-Unit. The Mid-Hungarian Fault Zone accommodated simultaneous strike-perpendicular shortening and strike-slip movements, concomitant with strike-parallel extension. (2) The Mid-Hungarian Fault Zone is also the locus of a former plate boundary transforming opposed subduction polarities between Alps (including Western Carpathians) and Dinarides. (3) The ALCAPA Mega-Unit was affected by 290 km extension and fits into an area W of present-day Budapest in its restored position, while the Tisza-Dacia Mega-Unit was affected by up to 180 km extension during its emplacement into the Carpathian embayment. (4) The external Dinarides experienced Neogene shortening of over 200 km in the south, contemporaneous with dextral wrench movements in the internal Dinarides and the easterly adjacent Carpatho-Balkan orogen. (5) N–S convergence between the European and Adriatic plates amounts to some 200 km at a longitude of 14° E, in line with post-20 Ma subduction of Adriatic lithosphere underneath the Eastern Alps, corroborating the discussion of results based on high-resolution teleseismic tomography.The displacement of the Adriatic Plate indenter led to a change in subduction polarity along a transect through the easternmost Alps and to substantial Neogene shortening in the eastern Southern Alps and external Dinarides. While we confirm that slab-pull and rollback of oceanic lithosphere subducted beneath the Carpathians triggered back-arc extension in the Pannonian Basin and much of the concomitant folding and thrusting in the Carpathians, we propose that the rotational displacement of this indenter provided a second important driving force for the severe Neogene modifications of the Alpine-Carpathian-Dinaridic orogenic system.     

Postglacial to Holocene landscape evolution and process rates in steep alpine catchments

Climate change and high magnitude mass wasting events pose adverse societal effects and hazards, especially in alpine regions. Quantification of such geomorphic processes and their rates is therefore critical but is often hampered by the lack of appropriate techniques and the various spatiotemporal scales involved in these studies. Here we exploit both in situ cosmogenic beryllium-10 (¹⁰Be) and carbon-14 (¹⁴C) nuclide concentrations for deducing exposure ages and tracing of sediment through small alpine debris flow catchments in central Switzerland. The sediment cascade and modern processes we track from the source areas, through debris flow torrents to their final export out into sink regions with cosmogenic nuclides over an unprecedented five-year time series with seasonal resolution. Data from a seismic survey and a 90 m core revealed a glacially overdeepened basin, filled with glacial and paraglacial sediments. Surface exposure dating of fan boulders and radiocarbon ages constrain the valley fill from the last deglaciation until the Holocene and show that most of the fan existed in early Holocene times already. Current fan processes are controlled by episodic debris flow activity, snow (firn) and rock avalanches. Field investigations, digital elevation models (DEMs) of difference and geomorphic analysis agree with sediment fingerprinting with cosmogenic nuclides, highlighting that the bulk of material exported today at the outlet of the subcatchments derives from the lower fans. Cosmogenic nuclide concentrations steadily decrease from headwater sources to distal fan channels due to the incorporation of material with lower nuclide concentrations. Further downstream the admixture of sediment from catchments with less frequent debris flow activity can dilute the cosmogenic nuclide signals from debris flow dominated catchments but may also reach thresholds where buffering is limited. Consequently, careful assessment of boundary conditions and driving forces is required when apparent denudation rates derived from cosmogenic nuclide analysis are upscaled to larger regions. © 2018 John Wiley & Sons, Ltd.     

Buildings in GI: How to deal with building models in the GIS domain

Digital building information is important during a building's lifecycle, it is needed from first design until demolition. The two domains that mainly contribute are AEC (architecture, engineering, and construction) during design, construction, and operation, and GIS as a supporting discipline for analysis and further integration of the building's environment. However, there is a challenge in information exchange between the two domains, resulting in the remodeling of digital building information in GIS. In this article, we identify three major data sources from the AEC domain and show transformation processes to enable the integration of such models into the geographical environment in the form of one transition model. Furthermore, we show that this model can either be used directly or exported in the form of de facto standards that allow for further analysis.     

Automated placement of supplementary contour lines

Supplementary contour lines are placed between regular contour lines to visualize small but important forms that regular contour lines are unable to show. On topographic maps, typical forms are hillcrests, depressions, saddles, terraces, banks, and levees. No automated method for the selection of supplementary contour lines has been described so far. We document cartographic design principles for the selection of supplementary contour lines for topographic maps, and present an automated method for their placement. Results of the automated method are similar to manually placed supplementary contour lines. Our method helps map authors to create contour line maps that more effectively illustrate relevant small details in maps showing terrain elevation or other scalar fields.