On the Differences Between Odd and Even Solar Cycles

It is proposed that the observed differences between odd and even solar cycles are a consequence of the nonlinear interactions that provide the stabilizing mechanism for the cycle's amplitude. If, for example, the magnetic field is larger than average for a given cycle (say odd), the nonlinear feedback mechanism can generate a magnetic field that is smaller than average for the next cycle (even), and then one that is larger than average for the following cycle (odd), etc. As a consequence the odd cycles have larger amplitudes than even cycles. A very simply model having a nonlinear interaction that reproduces this behavior is discussed.     

Groundwater Defluoridation with Raw Bauxite,Gypsum, Magnesite,and Their Composites

Breakthrough characteristics, kinetics, and dose‐effect in defluoridation with bauxite, gypsum, magnesite, and their composites were determined. The aim was to identify optimum filter and configuration viable for groundwater defluoridation. Bed depth service time (BDST) design model and empty bed residence time (EBRT) optimization model were employed to characterize breakthrough. Higher doses obtained lower loading capacities but higher sorption percentages and breakthrough times. Breakthrough times obtained were 50 400, 32 400, 25 200, and 19 800 s for 150, 120, 75, and 45 g, respectively. The equation ? = 1.0 × 10^?4 δ² ?0.022 δ + 1.5053 defined the operating line with ?, adsorbent exhaustion rate, in g L^?1 and δ, EBRT, in seconds. A critical bed depth (Z_o) of 6.56 cm was obtained. Second order kinetic rate constants were 0.73, 1.17, and 1.81 g mg^?1 s^?1 for magnesite, gypsum, and bauxite, respectively. The composite, gypsum and bauxite decreased water pH but magnesite increased pH in water defluoridation. Experimental data did not fit the two‐parameter logistics model; model values were significantly different from experimental values. Optimum defluoridation characteristics were obtained in fixed bed. Despite high residual sulphates and apparent color, fixed‐bed defluoridation with raw composites of these materials, treated in this manner, is viable.     

Geostatistical traveltime tomography in elliptically anisotropic media

In geological materials, anisotropy may arise due to different mechanisms and can be found at different scales. Neglecting anisotropy in traveltime tomographic reconstruction leads to artefacts that can obscure important subsurface features. In this paper, a geostatistical tomography algorithm to invert cross‐hole traveltime data in elliptically anisotropic media is presented. The advantages of geostatistical tomography are that the solution is regularized by the covariance of the model parameters, that known model parameters can be used as constraints and fitted exactly or within a prescribed variance and that stochastic simulations can be performed to appraise the variability of the solution space. The benefits of the algorithm to image anisotropic media are illustrated by two examples using synthetic georadar data and real seismic data. The first example confirms suspected electromagnetic anisotropy in the vadose zone caused by relatively rapid water content variations with respect to wavelength at georadar frequencies. The second presents how sonic log data can be used to constrain the inversion of cross‐well seismic data and how geostatistical simulations can be used to infer parameter uncertainty. Results of both examples show that considering anisotropy yields a better fit to the data at high ray angles and reduces reconstruction artefacts.     

Coastal resource degradation in the tropics: does the tragedy of the commons apply for coral reefs, mangrove forests and seagrass beds

The keynote paper by Garrett Hardin 44 years ago introduced the term 'tragedy of the commons' into our language (Hardin, 1968); this term is now used widely, but it is neither universally accepted nor fully understood. Irrespective, the 'tragedy of the commons' is an increasing reality for more than 500 million people that rely on the biodiversity resources and services of tropical coral reefs, mangrove forests, seagrass beds and associated fisheries. These natural resources continue to decline despite major advances in our scientific understanding of how ecosystems and human populations interact, and the application of considerable conservation and management efforts at scales from local user communities to oceans. Greater effort will be required to avert increasing damage from over-exploitation, pollution and global climate change; all deriving from increasing exploitation driven by poverty and progress i.e. continuing to expand development indefinitely and extraction of resources at industrial scales. However, the 'tragedy' concept has been widely criticized as a simple metaphor for a much larger set of problems and solutions. We argue that the 'tragedy' is essentially real and will continue to threaten the lives of millions of people unless there are some major moral and policy shifts to reverse increasing damage to coastal habitats and resources. We agree with the conclusion by Hardin that the solution to the tragedy will not be through the application of natural sciences, but via implementing exceedingly difficult and controversial moral decisions. An extreme example of a moral and controversial direction suggested by Hardin was in re-examining the 'freedom to breed' as an inherent human value. The need for 'moral decisions' is even greater in 2012.     

Wind direction and complex sediment transport response across a beach–dune system

Evidence from a field study on wind flow and sediment transport across a beach–dune system under onshore and offshore conditions (including oblique approach angles) indicates that sediment transport response on the back‐beach and stoss slope of the foredune can be exceedingly complex. The upper‐air flow – measured by a sonic anemometer at the top of a 3·5 m tower located on the dune crest – is similar to regional wind records obtained from a nearby meteorological station, but quite different from the near‐surface flow field measured locally across the beach–dune profile by sonic anemometers positioned 20 cm above the sand surface. Flow–form interaction at macro and micro scales leads to strong modulation of the near‐surface wind vectors, including wind speed reductions (due to surface roughness drag and adverse pressure effects induced by the dune) and wind speed increases (due to flow compression toward the top of the dune) as well as pronounced topographic steering during oblique wind approach angles. A conceptual model is proposed, building on the ideas of Sweet and Kocurek (Sedimentology 37 : 1023–1038, 1990), Walker and Nickling (Earth Surface Processes and Landforms 28 : 111–1124, 2002), and Lynch et al. (Earth Surface Processes and Landforms 33 : 991–1005, 2008, Geomorphology 105 : 139–146, 2010), which shows how near‐surface wind vectors are altered for four regional wind conditions: (a) onshore, detached; (b) onshore‐oblique, attached and deflected; (c) offshore, detached; and (d) offshore‐oblique, attached and deflected. High‐frequency measurements of sediment transport intensity during these different events demonstrate that predictions of sediment flux using standard equations driven by regional wind statistics would by unreliable and misleading. It is recommended that field studies routinely implement experimental designs that treat the near‐surface wind field as comprising true vector quantities (with speed and direction) in order that a more robust linkage between the regional (upper air) wind field and the sediment transport response across the beach–dune profile be established. Copyright © 2012 John Wiley & Sons, Ltd.     

Design and implementation of an image stabilization device at the THEMIS solar telescope

An image stabilizer has been inserted into the optical path of the THEMIS solar telescope. THEMIS is a Ritchey–Chretien reflector telescope using an altazimuthal mount and closely tied to its spectrograph. The optical and mechanical design, implementation and system tests are described, and emphasis is put on the complexity of situations that this stabilizer must accept, including the scanning of the solar surface while stabilizing. The current closed-loop crossover frequency of the device is 65 Hz at ??3 dB on all typical solar scenes.     

Modelling the Velocity Field in a Regular Grid in the Area of Poland on the Basis of the Velocities of European Permanent Stations

The paper presents the results of testing the various methods of permanent stations’ velocity residua interpolation in a regular grid, which constitutes a continuous model of the velocity field in the territory of Poland. Three packages of software were used in the research from the point of view of interpolation: GMT (The Generic Mapping Tools), Surfer and ArcGIS. The following methods were tested in the softwares: the Nearest Neighbor, Triangulation (TIN), Spline Interpolation, Surface, Inverse Distance to a Power, Minimum Curvature and Kriging. The presented research used the absolute velocities’ values expressed in the ITRF2005 reference frame and the intraplate velocities related to the NUVEL model of over 300 permanent reference stations of the EPN and ASG-EUPOS networks covering the area of Europe. Interpolation for the area of Poland was done using data from the whole area of Europe to make the results at the borders of the interpolation area reliable. As a result of this research, an optimum method of such data interpolation was developed. All the mentioned methods were tested for being local or global, for the possibility to compute errors of the interpolated values, for explicitness and fidelity of the interpolation functions or the smoothing mode. In the authors’ opinion, the best data interpolation method is Kriging with the linear semivariogram model run in the Surfer programme because it allows for the computation of errors in the interpolated values and it is a global method (it distorts the results in the least way). Alternately, it is acceptable to use the Minimum Curvature method. Empirical analysis of the interpolation results obtained by means of the two methods showed that the results are identical. The tests were conducted using the intraplate velocities of the European sites. Statistics in the form of computing the minimum, maximum and mean values of the interpolated North and East components of the velocity residuum were prepared for all the tested methods, and each of the resulting continuous velocity fields was visualized by means of the GMT programme. The interpolated components of the velocities and their residua are presented in the form of tables and bar diagrams.     

Electrical Resistance Heating of Clay Layers in Water‐Saturated Sand

Electrical resistance heating (ERH) experiments were performed in a two‐dimensional water‐saturated porous medium comprising an electrically conductive, low‐permeability clay lens embedded within a less electrically conductive, higher permeability silica sand. These were compared to experiments performed in homogeneous silica sand. All experiments were performed in the absence of a non‐aqueous phase liquid (NAPL) or dissolved volatile organic compound (VOC). Temperature monitoring showed preferential heating in the clay lens and higher overall heating rates throughout the test cell compared to the homogeneous case. Gas production was localized around the sand–clay interface due to high temperature and low capillary displacement pressure. Above the clay lens, unexpected temperature plateaus were observed, similar to those observed in previous experiments during NAPL–water co‐boiling. A conceptual model based on the consumption of thermal energy as latent heat of vaporization in the highly localized heating and gas production region adjacent to the clay lens is proposed to explain the temperature plateaus. Supporting data is drawn from images of the gas phase and electric current measurements. These results show that the use of co‐boiling plateaus as an indicator of NAPL–water co‐boiling could be misleading during applications of ERH at sites containing electrically conductive, low‐permeability clay lenses embedded within less electrically conductive, higher‐permeability sands.     

Sources of dissolved silica to the fjords of northern Patagonia (44–48°S): the importance of volcanic ash soil distribution and weathering

Dissolved silica (DSi) plays an important biogeochemical role in the fjords of northern Chilean Patagonia (44–48°S), where it drives high biogenic productivity and promotes carbon burial. It is generally believed that the DSi riverine input to lakes and coastal environments is controlled by a combination of factors including lithology, climate, topography, vegetation, and meltwater input. In northern Chilean Patagonia several authors have proposed that the postglacial volcanic ash soils (andosols) may play a significant role in the high supply of DSi to the regional fjords. To assess the influence of andosols on DSi concentrations in north Patagonian rivers, we mapped andosol thickness and compared our results with river chemistry. The mineralogical and geochemical composition of three representative andosol profiles was also examined to evaluate the efficiency of weathering processes. The andosol thickness map clearly demonstrates that volcanic ash was predominantly deposited on the eastern side of the regional volcanoes, reflecting the influence of the prevailing westerly winds on the distribution of pyroclastic material. Mineralogical and geochemical results show that the andosol parent material has the typical andesitic basaltic signature of the regional volcanoes, i.e. high amounts of amorphous material, plagioclase, K‐feldspar, and pyroxene. Down‐profile variations in soil mineralogy and geochemistry indicate increased leaching of silica with depth, resulting from weathering of the volcanic parent material. For the five studied watersheds, a highly positive correlation (R²=0.98) was found between average andosol thickness and DSi concentrations, suggesting that andosol thickness is the main parameter affecting DSi concentrations in north Patagonian river systems. On seasonal timescales, increased precipitation (winter) and glacial meltwater (summer) input can significantly reduce DSi concentrations. We argue that the weathering of andosols constitutes the most important source of DSi to the lakes and fjords of northern Chilean Patagonia, explaining the particularly high regional rates of biogenic silica production. Copyright © 2015 John Wiley & Sons, Ltd.