Correlation of reefal Oxfordian episodes and climatic implications in the eastern Paris Basin (France)

Oxfordian reefal episodes of Lorraine and Burgundy have a long time been considered as contemporaneous. Biostratigraphic data and sequential evolutions peculiar to each region indicate their structural autonomy during Oxfordian times. A north‐south‐oriented well‐logging transect shows that, during the Middle Oxfordian, a shallow reefal platform developed in Lorraine while thin deeper deposits occurred in Burgundy. In spite of their different ages, reefal episodes of Middle Oxfordian in Lorraine and Upper Oxfordian in Burgundy exhibit a broadly similar vertical evolution of coral communities. During the Late Oxfordian, the contemporaneous occurrence of a diversified assemblage in the Burgundy region, a colder coral assemblage characterized by eurytopic genera and the decrease in seawater isotopic temperatures in Lorraine can be explained by a shift in trophic conditions, a climatic change related to structural rearrangements in this strategic place and a modification of oceanic circulations between the arctic and the Tethyan regions.     

Low-degree partial melting trends recorded in upper mantle minerals

The study of glass inclusions inside mantle minerals provides direct information about the chemistry of naturally occurring mantle-derived melts and the fine-scale complexity of the melting process responsible for their genesis. Minerals in a spinel lherzolite nodule from Grande Comore island contain glass inclusions which, after homogenization by heating, exhibit a continuous suite of chemical compositions clearly distinct from that of the host basanitic lava. The compositions range from silicic, with nepheline–olivine normative, 64 wt% SiO₂ and 11 wt% alkali oxides, to almost basaltic, with quartz normative, 50 wt% SiO₂ and 1–2 wt% alkali oxides. Within a single mineral phase, olivine, the inferred primary melt composition varies from 54 to 64 wt% SiO₂ for MgO content ranging from 8 to 0.8 wt%. An experimental study of the glass and fluid inclusions indicates that trapped melts represent liquids that are in equilibrium with their host phases at moderate temperature and pressure (T≈1230°C and P≈1.0 Gpa for melts trapped in olivine). Quantitative modelling of the compositional trends defined in the suite shows that all of the glasses are part of a cogenetic set of melts formed by fractional melting of spinel lherzolite, with F varying between 0.2 and 5%. The initial highly silicic, alkali-rich melts preserved in Mg-rich olivine become richer in FeO, MgO, CaO and Cr₂O₃ and poorer in SiO₂, K₂O, Na₂O, Al₂O₃ and Cl with increasing melt fractions, evolving toward the basaltic melts found in clinopyroxene. These results confirm the connection between glass inclusions inside mantle minerals and partial mantle melts, and indicate that primary melts with SiO₂ >60 wt%, alkali oxides >11%, FeO <1 wt% and MgO <1 wt% are generated during incipient melting of spinel peridotite. The composition of the primary melts is inferred to be dependent on pressure, and to reflect both the speciation of dissolved CO₂ and the effect of alkali oxides on the silica activity coefficient in the melt. At pressures around 1 GPa, low-degree melts are characterized by alkali and silica-rich compositions, with a limited effect of dissolved CO₂ and a decreased silica activity coefficient caused by the presence of alkali oxides, whereas at higher pressures alkali oxides form complexes with carbonates and, consequently, alkali-rich silica-poor melts will be generated.     

The Okavango giant mafic dyke swarm (NE Botswana): its structural significance within the Karoo Large Igneous Province

The structural organization of a giant mafic dyke swarm, the Okavango complex, in the northern Karoo Large Igneous Province (LIP) of NE Botswana is detailed. This N110°E-oriented dyke swarm extends for 1500 km with a maximum width of 100 km through Archaean basement terranes and Permo-Jurassic sedimentary sequences. The cornerstone of the study is the quantitative analysis of N>170 (exposed) and N>420 (detected by ground magnetics) dykes evidenced on a ca. 80-km-long section lying in crystalline host-rocks, at high-angle to the densest zone of the swarm (Shashe area). Individual dykes are generally sub-vertical and parallel to the entire swarm. Statistical analysis of width data indicates anomalous dyke frequency (few data <5.0 m) and mean dyke thickness (high value of 17 m) with respect to values classically obtained from other giant swarms. Variations of mean dyke thicknesses from 17 (N110°E swarm) to 27 m (adjoining and coeval N70°E giant swarm) are assigned to the conditions hosting fracture networks dilated as either shear or pure extensional structures, respectively, in response to an inferred NNW–SSE extension. Both fracture patterns are regarded as inherited brittle basement fabrics associated with a previous (Proterozoic) dyking event. The Okavango N110°E dyke swarm is thus a polyphase intrusive system in which total dilation caused by Karoo dykes (estimated frequency of 87%) is 12.2% (6315 m of cumulative dyke width) throughout the 52-km-long projected Shashe section. Assuming that Karoo mafic dyke swarms in NE Botswana follow inherited Proterozoic fractures, as similarly applied for most of the nearly synchronous giant dyke complexes converging towards the Nuanetsi area, leads us to consider that the resulting triple junction-like dyke/fracture pattern is not a definitive proof for a deep mantle plume in the Karoo LIP.     

Pyroclastic Flow Hazard at Volcán Citlaltépetl

Volcán Citlaltépetl (Pico de Orizaba) with an elevation of 5,675 m is the highest volcano in North America. Its most recent catastrophic events involved the production of pyroclastic flows that erupted approximately 4,000, 8,500, and 13,000 years ago. The distribution of mapped deposits from these eruptions gives an approximate guide to the extent of products from potential future eruptions. Because the topography of this volcano is constantly changing computer simulations were made on the present topography using three computer algorithms: energy cone, FLOW2D, and FLOW3D. The Heim Coefficient (), used as a code parameter for frictional sliding in all our algorithms, is the ratio of the assumed drop in elevation (H) divided by the lateral extent of the mapped deposits (L). The viscosity parameter for the FLOW2D and FLOW3D codes was adjusted so that the paths of the flows mimicked those inferred from the mapped deposits. We modeled two categories of pyroclastic flows modeled for the level I and level II events. Level I pyroclastic flows correspond to small but more frequent block-and-ash flows that remain on the main cone. Level II flows correspond to more widespread flows from catastrophic eruptions with an approximate 4,000-year repose period. We developed hazard maps from simulations based on a National Imagery and Mapping Agency (NIMA) DTED-1 DEM with a 90 m grid and a vertical accuracy of ±30 m. Because realistic visualization is an important aid to understanding the risks related to volcanic hazards we present the DEM as modeled by FLOW3D. The model shows that the pyroclastic flows extend for much greater distances to the east of the volcano summit where the topographic relief is nearly 4,300 m. This study was used to plot hazard zones for pyroclastic flows in the official hazard map that was published recently.     

The replacement of anthophyllite by jimthompsonite: a model for hydration reactions in biopyriboles

Anthophyllite crystals found in ultramafic lenses of the Lepontine Alps (Switzerland) contain coherent, submicroscopic intergrowths of ordered and disordered biopyribole polysomes. The chain width distributions of disordered polysomes were analyzed using high resolution transmission electron microscopy (HRTEM). Chains wider than triple were interpreted as intermediate products in the transformation of anthophyllite to the triple chain silicate jimthompsonite. The concentration of individual chain types is strongly correlated with the reaction progress. Based on observed zipper terminations and the transformation rules given by Veblen and Buseck (1980) a scheme of possible reaction paths leading from anthophyllite to jimthomp sonite is proposed. The reaction scheme and a simple kinetic model for elementary reactions allow modeling of the observed chain width distributions. The model suggests that the complex reaction paths involving steps with increasing and decreasing chain width are more important in the formation of jimthompsonite than the direct transformation from anthophyllite. The wide chains (>triple) occurring as intermediate products of the multi-step paths are structurally closer to talc than jimthompsonite. The back-transformation of these wide chains to triple chains is, therefore, a strong argument that jimthompsonite is a stable phase and not only a metastable intermediate product in the transformation of anthophyllite to talc. Received: 8 July 1996 / Accepted: 13 December 1996     

Isotope and trace element geochemistry of sediments from the Barbados Ridge-Demerara Plain region,Atlantic Ocean

Twenty-four piston core sediment samples and 13 sediments and 3 basalts from DSDP Leg 78 Site 543 were analyzed for Sr, Nd and Pb isotopic compositions. The results show sediment with highly radiogenic Pb${}^{206}\text{Pb}{}^{204}\text{Pb}$ up to 19.8) and rather radiogenic Sr and unradiogenic Nd has been deposited in the region since the Cretaceous. The source of this sediment is probably the Archean Guiana Highland, which is drained by the Orinoco River. Pb and Sr isotopic compositions and sediment thickness decrease and${}^{143}\text{Nd}{}^{144}\text{Nd}$ increases northward due to a decrease in turbiditic component. This decrease is partly due to the damming action of basement ridges. Rare earth concentrations in the sediments are somewhat low, due to the abundance of detrital and biogenic components in the sediment and rapid sedimentation rates. Both positive and negative Ce anomalies occur in the surface sediments, but only positive Ce anomalies occur in the Site 543 sediments. It is unlikely that sediment subducted to the source region of Lesser Antilles arc magmas could be the cause of negative Ce anomalies in those magmas.Isotopic compositions of Site 543 basalts show some effect of contamination by seawater-basalt reaction products and sediments. Beyond this, however, they are typical of “normal” depleted MORB.     

A review of the NEMURO and NEMURO.FISH models and their application to marine ecosystem investigations

The evolution of the North Pacific Ecosystem Model for Understanding Regional Oceanography (NEMURO) family of models to study marine ecosystems is reviewed. Applications throughout the North Pacific have shown the models to be robust and to be able to reproduce 1D, 2D and 3D components of nutrient, carbon cycle and biogeochemical cycles as well as aspects of the lower trophic levels ecosystem (phyto- and zooplankton). NEMURO For Including Saury and Herring, an extension that includes higher trophic levels, can be run uncoupled or coupled to NEMURO. In the uncoupled mode, the growth and weight of an individual fish is computed using plankton densities simulated by NEMURO but with no feedback between fish consumption and plankton mortality. In the coupled mode, the feeding, growth and weight of a representative fish are computed, and prey removals due to feeding by fish appear as mortality terms on the prey. The NEMURO family of models continues to evolve, including effects of the microbial loop and iron limitation at lower trophic levels, and full life cycle, multi-species and multi-generational simulations at higher trophic levels. We outline perspectives for future end-to-end modeling efforts that can be used to study marine ecosystems in response to global environmental change.     

A new method for sampling and analyzing volcanic sublimates — application to Merapi volcano, Java

A new method for the sampling of sublimates from high-temperature volcanic gases has been used at Merapi volcano, Java, in 1978. The sublimates were collected on the inner walls of silica tubes introduced into fumarolic vents. Volcanic gases were allowed to move freely through the tubes and as they cooled, a fraction of the volatile components condensed on the inner walls of the tubes along the temperature gradient. The sublimates were then analyzed by a combination of light microscopy, scanning electron microscopy, electron microprobe and X-ray diffraction.Six successive zones of different compositions and mineralogical associations have been identified along the covered range of temperatures (900° to around 400°C). From the high to the low temperatures, these zones are composed of: (1) cristobalite, magnetite, hercynite; (2) molybdenite; (3) acmite; (4) halite, sylvite; (5) sphalerite, pyrite; and (6) galena. Equilibrium calculations show that these crystalline phases are stable for pS₂, pC₁, and pO₂, values typical of magma-buffered gases that have not been contaminated by atmospheric oxygen.The deposits observed in the tubes may be useful in aiding the understanding of the mechanisms acting during the cooling of the gaseous phase on its way to the surface and before its emission into the atmosphere.     

Development of a soil moisture‐based distributed hydrologic model for determining hydrologically based critical source areas

A simple grid cell‐based distributed hydrologic model was developed to provide spatial information on hydrologic components for determining hydrologically based critical source areas. The model represents the critical process (soil moisture variation) to run‐off generation accounting for both local and global water balance. In this way, it simulates both infiltration excess run‐off and saturation excess run‐off. The model was tested by multisite and multivariable evaluation on the 50‐km² Little River Experimental Watershed I in Georgia, U.S. and 2 smaller nested subwatersheds. Water balance, hydrograph, and soil moisture were simulated and compared to observed data. For streamflow calibration, the daily Nash‐Sutcliffe coefficient was 0.78 at the watershed outlet and 0.56 and 0.75 at the 2 nested subwatersheds. For the validation period, the Nash‐Sutcliffe coefficients were 0.79 at the watershed outlet and 0.85 and 0.83 at the 2 subwatersheds. The per cent bias was less than 15% for all sites. For soil moisture, the model also predicted the rising and declining trends at 4 of the 5 measurement sites. The spatial distribution of surface run‐off simulated by the model was mainly controlled by local characteristics (precipitation, soil properties, and land cover) on dry days and by global watershed characteristics (relative position within the watershed and hydrologic connectivity) on wet days when saturation excess run‐off was simulated. The spatial details of run‐off generation and travel time along flow paths provided by the model are helpful for watershed managers to further identify critical source areas of non‐point source pollution and develop best management practices.