Volcanic vents rooted on extension fractures and their geodynamic implications in the Ethiopian Rift

Most of the extension fractures located in the Ethiopian rift are related to rift dynamics, and they have consistently similar orientations for hundreds of kilometers. The orientation of extension fracture gives the local extension direction which is perpendicular to its horns (end segments of an extension fracture). We have established clear geometrical relationships between tectonics and volcanism in the Main Ethiopian Rift by interpreting high-resolution images obtained from Landsat-TM and SPOT satellites and by quantitatively analyzing the geometry of extension fractures, elongated vents and linear volcanic clusters. Applying the relationships obtained, we show that extension fractures in the rift served as channels for magma rising to the surface, and that extension fractures underlie most of the elongated volcanic vents and linear volcanic clusters. The geometry of extension fractures beneath volcanic edifices can be deduced from the shape of elongated vents and pattern of linear volcanic clusters rooted on them. Utilizing the orientations of extension fractures directly observed and those inferred from elongated volcanic vents and linear clusters, we found that the extension direction of the Main Ethiopian Rift is northwest–southeast and that the direction has been rotated clockwise for about 20° in the time interval 2.83 to 0.023 Ma. The Recent axis of rift opening is oriented N40° and located closer to the southeastern escarpment giving an asymmetric geometry to the Main Ethiopian Rift (MER).     

Wind direction and complex sediment transport response across a beach–dune system

Evidence from a field study on wind flow and sediment transport across a beach–dune system under onshore and offshore conditions (including oblique approach angles) indicates that sediment transport response on the back‐beach and stoss slope of the foredune can be exceedingly complex. The upper‐air flow – measured by a sonic anemometer at the top of a 3·5 m tower located on the dune crest – is similar to regional wind records obtained from a nearby meteorological station, but quite different from the near‐surface flow field measured locally across the beach–dune profile by sonic anemometers positioned 20 cm above the sand surface. Flow–form interaction at macro and micro scales leads to strong modulation of the near‐surface wind vectors, including wind speed reductions (due to surface roughness drag and adverse pressure effects induced by the dune) and wind speed increases (due to flow compression toward the top of the dune) as well as pronounced topographic steering during oblique wind approach angles. A conceptual model is proposed, building on the ideas of Sweet and Kocurek (Sedimentology 37 : 1023–1038, 1990), Walker and Nickling (Earth Surface Processes and Landforms 28 : 111–1124, 2002), and Lynch et al. (Earth Surface Processes and Landforms 33 : 991–1005, 2008, Geomorphology 105 : 139–146, 2010), which shows how near‐surface wind vectors are altered for four regional wind conditions: (a) onshore, detached; (b) onshore‐oblique, attached and deflected; (c) offshore, detached; and (d) offshore‐oblique, attached and deflected. High‐frequency measurements of sediment transport intensity during these different events demonstrate that predictions of sediment flux using standard equations driven by regional wind statistics would by unreliable and misleading. It is recommended that field studies routinely implement experimental designs that treat the near‐surface wind field as comprising true vector quantities (with speed and direction) in order that a more robust linkage between the regional (upper air) wind field and the sediment transport response across the beach–dune profile be established. Copyright © 2012 John Wiley & Sons, Ltd.     

Geostatistical analysis in weathering studies: case study for Stanton Moor building sandstone

Geostatistical techniques for spatial prediction and spatial simulation have been used in an innovative application to the study of weathering of natural building stone. The study investigates the differences in the spatial variation of permeability characteristics between fine‐ and coarse‐grained Stanton Moor building sandstone. Non‐destructive permeability measurements, using an unsteady‐state Portable Probe Permeameter, were made on three adjacent faces of two cubic blocks representative of fine‐ to medium‐grained and medium‐ to coarse‐grained Stanton Moor Sandstone. The findings provide greater understanding in the investigation of the durability characteristics of the Stanton Moor Sandstone and show that the spatial distribution and variability of permeability is more important in predicting the overall strength and weathering properties than mean permeability and absolute minimum and maximum values. The results suggest that both primary textural characteristics (such as grain size) and extent of cementation appear to be important factors in determining the overall durability properties of Stanton Moor Sandstone as a building stone. Geostatistical analysis has been shown to be an important tool in the characterization of spatial variation for the investigation of weathering of building stones. Copyright © 2006 John Wiley & Sons, Ltd.     

Compressive tectonism along the eastern margin of Malaita Island (Solomon Islands)

New bathymetric and geophysical data were collected in the region east of the island of Malaita during the SOPACMAPS II cruise of the French research vessel L'ATALANTE. This region, part of the Malaita Anticlinorium was interpreted as a piece of oceanic crust from the Ontong Java Plateau obducted over the old Solomon Islands arc during collision between the Pacific and Australian plates. It has been generally accepted that convergent motion between the Australia and Pacific plates since the Late Miocene was absorbed exclusively along the San Cristobal trench, southwest of the Solomon Islands Arc.Bathymetry, imagery, and geophysical data (magnetism, gravity, seismic) acquired during the SOPACMAPS II survey allow us to classify the successive parallel ridges mapped within the region as being recent volcanic, oceanic crust, or deformed sedimentary ridges.Seismic profiling provides evidence of successive compressive events along the Malaita margin caused by the relative motion between the Solomon Islands and the Pacific plate. The main phase of convergence probably occurred during Oligocene-early Miocene time, but some relative motion between the two domains are still being absorbed along the East Malaita boundary. The existence of active faulting in the sedimentary cover throughout the region and the present-day deformation of the outer sedimentary ridge is a good illustration of this phenomenon.     

Coarse cliff-top aeolian sedimentation in northern Gaspésie,Québec (Canada)

This paper deals with the effects of wind on rockwall dynamics. On 5 and 6 January, 1988 very strong northwest winds (blizzard) were blowing onto the rockwall of Mount Saint-Pierre (alt.: 424 m), Gaspésie, Québec (Canada). The most violent recorded squall reached 99·4 km h^?1. During this event, the summit plateau received a large amount of aeolian sediments originating from the shale rockwall that forms the mountain's northwest side. In the 15 to 20 m wide by 75 m long belt located along the top of the rockwall, over a 1200 m² area, a continuous layer of debris completely covered the snow. This layer of debris had a mean thickness of 11·4 mm, which represents an accumulated volume in the order of 13 m³. Largely dominated by sand and granules (2–4 mm), the 28 samples collected for grain-size analysis also contained numerous thin shale flakes, many of which were longer than 10 mm. The largest flake measured had a width of 134 mm and a weight of 164·3 g. Six available ¹⁴C dates provide information concerning mean cliff-top aeolian sedimentation rate for the last thousand years (c. 1·8 mmyr^?1).     

A Practical Approach for Collecting Large‐n Detrital Zircon U‐Pb Data sets by Quadrupole LA‐ICP‐MS

A measurement procedure for the rapid acquisition of U‐Pb dates for detrital zircons by quadrupole LA‐ICP‐MS was developed. The procedure achieves a threefold increase in measurement efficiency compared with the most commonly used methods. Utilising reduced background counting times and a shortened ablation period, a throughput of ~ 130 measurements/h can be achieved. The measurement procedure was characterised and validated using data from thirty‐nine sessions acquired over a twelve‐month period. Systematic measurement error in ²⁰⁶Pb/²³⁸U dates for reference materials used for quality control with ages between 28.2 and 2672 Ma was < 1.5%. Average measurement uncertainty, including both random and systematic components, was 1–4% (2s). Interrogation of time‐resolved calculated dates and signal intensities for each measurement allows for the detection and elimination of portions of measurements exhibiting age heterogeneities, zoning, lead loss and contamination by common lead. The measurement procedure diminishes the need to acquire cathodoluminescence imagery for routine detrital zircon applications further increasing throughput and reducing cost. The utility of the measurement procedure is demonstrated by the measurement of samples previously characterised by LA‐MC‐ICP‐MS.     

Internal and forced variability along a section between Greenland and Portugal in the CLIPPER Atlantic model

Numerical models are used to estimate the meridional overturning and transports along the paths of two hydrographic cruises, carried out in 1997 and 2002 from Greenland to Portugal. We have examined the influence of the different paths of the two cruises and found that it could explain 0.4 to 2 Sv of difference in overturning (the precise value is model-dependent). Models show a decrease in the overturning circulation between 1997 and 2002, with different amplitudes. The CLIPPER ATL6 model reproduces well the observed weakening of the overturning in density coordinates between the cruises; in the model, the change is due to the combination of interannual and high-frequency forcing and internal variability associated with eddies and meanders. Examination of the -coordinate overturning reveals model–data discrepancies: the vertical structure in the models does not change as much as the observed one. The East Greenland current variability is mainly wind-forced in the ATL6 model, while fluctuations due to eddies and instabilities explain a large part of the North Atlantic Current variability. The time-residual transport of dense water and heat due to eddy correlations between currents and properties is small across this section, which is normal to the direction of the main current.     

REDD+ projects and national-level Readiness processes: a case study from Kenya

The Bali Action Plan and Cancun agreements on Reducing Emissions from Deforestation and forest Degradation, plus forest conservation, sustainable management of forests and enhancement of forest carbon stocks (REDD+) have encouraged demonstration activities as part of Readiness and a step towards national approaches. This has enabled important growth in pilot and demonstration projects. Yet an understanding about how these projects are connected and contribute to national-level technical, policy, and institutional preparedness (Readiness) for REDD+ is lacking. This article examines the linkages between national processes and the private-sector-driven Kasigau Corridor REDD+ project in Kenya. The study reveals interesting cross-scale interactions that have increased over time and have high potential for harnessing national-level processes through lessons from the project level. Key innovations from the Kasigau Corridor Project include the implementation of REDD+ in dry forests, operationalization of conservation easements in the context of REDD+, and demonstration of potential ways of obtaining upfront finance for REDD+. The study also provides a number of key recommendations for Kenya and REDD+ in general, including official endorsement of stand-alone REDD+ projects under national Readiness schemes and exploring jurisdictional and nested REDD+ approaches. Additionally, more accommodating national-level frameworks for attracting private-sector engagement and investments, and for integrating, scaling-out, or scaling-up lessons from such projects, would be needed to enhance national REDD+ Readiness.     

A Compilation of Silicon and Thirty One Trace Elements Measured in the Natural River Water Reference Material SLRS-4 (NRC-CNRC)

The natural river water certified reference material SLRS-4 (NRC-CNRC, National Research Council-Conseil National de Recherches Canada) has been routinely analysed for major and trace elements by six French laboratories. Most measurements were made using inductively coupled plasma-mass spectrometry. For silicon and thirty one trace elements (rare earth elements, Ag, B, Br, Cs, Ga, Ge, Li, P, Pd, Rb, Se, Th, Ti, Tl, W, Y and Zr), no certified values are assigned by NRC-CNRC. We propose some compilation values and related uncertainties according to the results obtained by the different laboratories.     

Extinction, survival and recovery of corals from the Triassic to Middle Jurassic time

Recognizing extinction events and determining their cause at the Triassic/Jurassic (T/J) transition and near the Pliensbachian–Toarcian (Lower Jurassic) boundary is a field of growing interest. We provide arguments for these events through a literature based new evaluation of coral diversity from Triassic to Dogger and a new palaeobiogeographical map. The T/J extinction of corals is clearly related to the breakdown of reef environments. Origination curves show that Hettangian (the lowest Jurassic stage) was not only a survival phase but already rather a recovery phase. Post-extinction evolution of reefs and their survival only in the northernmost margin of the Tethys support the hothouse hypothesis for the T/J extinction event. During Pliensbachian, many new taxa appear, but mostly solitary corals, not really framebuilders. Many of these taxa do not occur anymore during the following stages. The new increase in diversity is related to the development of Bajocian (Middle Jurassic) reefs.