Interannual Sea Level Variations in the South China Sea Over 1950–2009

Spatial patterns of interannual sea level variations in the South China Sea (SCS) are investigated by analyzing an EOF-based 2-dimensional past sea level reconstruction from 1950 to 2009 and satellite altimetry data from 1993 to 2009. Long-term tide gauge records from 14 selected stations in this region are also used to assess the quality of reconstructed sea levels and determine the rate of sea level along the coastal area. We found that the rising rate of sea levels derived from merged satellite altimetry data during 1993–2009 and past sea level reconstruction over 1950–2009 is about 3.9 ± 0.6 mm/yr and 1.7 ± 0.1 mm/yr, respectively. For the longer period, this rate is not significantly different from the global mean rate (of 1.8 ± 0.3 mm/yr). The interannual mean sea level of the SCS region appears highly correlated with Niño 4 indices (a proxy of El Niño-Southern Oscillation/ENSO), suggesting that the interannual sea level variations over the SCS region is driven by ENSO events. Interpolation of the reconstructed sea level data for 1950–2009 at sites where tide gauge records are of poor quality (either short or gapped) show that sea level along the Chinese coastal area is rising faster than the global mean rate of 1.8 mm/yr. At some sites, the rate is up to 2.5 mm/yr.     

Spatial and temporal variability of groundwater quality of an Algerian aquifer: the case of Soummam Wadi

ABSTRACT

Five-year monitoring of physicochemical parameters was performed with two campaigns in low and high water periods of the Lower Soummam catchment. Data from 18 wells were processed by multivariate statistical tools in order to identify the principal factors influencing groundwater chemistry. Two matrices of 14 and 8 physicochemical parameters with 18 groundwater samples collected in wells were obtained. The correlation matrix showed strong associations between nine variables: K⁺, Ca²⁺, Na⁺, SO₄^2?, Cl^?, Mg²⁺, NO₂^?, Zn²⁺ and Sr²⁺. Principal component analysis and factor analysis showed that the cumulated variance of high and low water periods was of 83.19% and 78.55%, respectively. The variables assigned to the mineralization effect or to pollution indicators were presented by the factor analysis. The bivariate plots confirmed a mineralization model, ascribed to dissolution of geological materials, and to high levels of saline contamination attributed to leakages from sanitary systems. They also showed an increase “upstream to downstream” of the mineralization, visualization of temporal variations, and a dilution process identification of the natural mineralization during the recharge of the aquifer.

EDITOR D. Koutsoyiannis; ASSOCIATE EDITOR X. Chen     

Magma expansion and fragmentation in a propagating dyke

The influence of magma expansion due to volatile exsolution and gas dilation on dyke propagation is studied using a new numerical code. Many natural magmas contain sufficient amounts of volatiles for fragmentation to occur well below Earth's surface. Magma fragmentation has been studied for volcanic flows through open conduits but it should also occur within dykes that rise towards Earth's surface. The characteristics of volatile-rich magma flow within a hydraulic fracture are studied numerically. The mixture of melt and gas is treated as a compressible viscous fluid below the fragmentation level and as a gas phase carrying melt droplets above it. The numerical code solves for elastic deformation of host rocks, the flow of the magmatic mixture and fracturing at the dyke tip. With volatile-free magma, a dyke fed at a constant rate in a uniform medium adopts a constant shape and width and rises at a constant velocity. With volatiles involved, magma expands and hence the volume flux of magma increases. With no fragmentation, this enhanced flux leads to acceleration and thinning of the dyke. Simple scaling laws allow accurate predictions of dyke width and ascent rate for a wide range of conditions. With fragmentation, dyke behaviour is markedly different. Due to the sharp drop of head loss that occurs in gas-rich fragmented material, large internal overpressures develop below the dyke tip and induce swelling of the nose region, leading to deceleration of the dyke. These results are applied to the two-month long period of volcanic unrest that preceded the May 1980 eruption of Mount St Helens. An initial phase of rapid earthquake migration from the 7–8 km deep reservoir to shallow levels was followed by very slow progression of magma within the edifice. Such behaviour can be accounted for by magma fragmentation at the top of a dyke.     

Reionization and the Cosmic Dawn with the Square Kilometre Array

The Square Kilometre Array (SKA) will have a low frequency component (SKA-low) which has as one of its main science goals the study of the redshifted 21 cm line from the earliest phases of star and galaxy formation in the Universe. This 21 cm signal provides a new and unique window both on the time of the formation of the first stars and accreting black holes and the subsequent period of substantial ionization of the intergalactic medium. The signal will teach us fundamental new things about the earliest phases of structure formation, cosmology and even has the potential to lead to the discovery of new physical phenomena. Here we present a white paper with an overview of the science questions that SKA-low can address, how we plan to tackle these questions and what this implies for the basic design of the telescope.     

Seismic wave velocity and anisotropy of serpentinized peridotite in the Oman ophiolite

Shallow seismic measurements in harzburgite from the Oman ophiolite performed in a zone where the maximum horizontal anisotropy is expected (vertical foliation and horizontal lineation) point to a dominant dependence of seismic properties on fracturing.

Optical microscopy studies show that microcracks are guided by the serpentine (lizardite) penetrative network oriented subparallel to the harzburgite foliation and subperpendicular to the mineral lineation, and that serpentine (lizardite) vein filling has a maximum concentration of (001) planes parallel to the veins walls. The calculated elastic properties of the oriented alteration veins filled with serpentine in an anisotropic matrix formed by oriented crystals of olivine and orthopyroxene are compared with seismic velocities measured on hand specimens.

Laboratory ultrasonic data indicate that open microcracks are closed at 100 MPa pressure, e.g. (J. Geophys. Res. 65, (1960) 1083) and (Proc. ODP Sci. Results Leg 118, (1990) 227). Above this pressure, laboratory measurements and modeling show that P-compressional and S-shear wave velocities are mainly controlled by the mineral preferred orientation. Veins sealed with serpentine are effective in slightly lowering P and S velocities and increasing anisotropy. The penetrative lizardite network does not affect directly the geometry of seismic anisotropy, but contributes indirectly in the fact that this network controls the microcrack orientations.

Comparison between seismic measurements of peridotite and gabbro in the same conditions suggest that P- and S-waves anisotropies are a possible discriminating factor between the two lithologies in the suboceanic lithosphere.     

Determination of Rare Earth Elements, Sc, Y, Zr, Ba, Hf and Th in Geological Samples by ICP-MS after Tm Addition and Alkaline Fusion

We present a revised method for the determination of concentrations of rare earth (REE) and other trace elements (Y, Sc, Zr, Ba, Hf, Th) in geological samples. Our analytical procedure involves sample digestion using alkaline fusion (NaOH-Na₂O₂) after addition of a Tm spike, co-precipitation on iron hydroxides, and measurement by sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS). The procedure was tested successfully for various rock types (i.e., basalt, ultramafic rock, sediment, soil, granite), including rocks with low trace element abundances (sub ng g⁻¹). Results obtained for a series of nine geological reference materials (BIR-1, BCR-2, UB-N, JP-1, AC-E, MA-N, MAG-1, GSMS-2, GSS-4) are in reasonable agreement with published working values.     

A stepwise screening system to select storm-sensitive stalagmites: Taking a targeted approach to speleothem sampling methodology

A stepwise stalagmite sample screening process was applied in order to select a stalagmite as a sensitive recorder of recent tropical cyclone rainfall events near Belize. Field and laboratory criteria were combined in series, to screen out candidate stalagmites whose characteristics indicated lower sensitivity to stormwater infiltration. The approach described here was designed to increase the likelihood that selected stalagmites would increase the signal:noise ratio of the target phenomenon in the resulting proxy records. This four-stage method for sample selection may be an important methodological consideration for researchers attempting to use speleothems for stable isotope paleotempestology. Hallmarks of this approach include: (1) establishing a priori scientific targets, (2) applying sample criteria in the form of contra-indicators, and (3) organizing the sample screening protocol into a series of practical stages. The overall approach to stalagmite selection presented here supports cave conservation, and can be adapted readily by others in support of different scientific goals. It is hoped that other investigators will also publish field and laboratory sample selection schemes, as increased transparency will provide new information invaluable to replication efforts and to advancing the field of speleothem paleo-environmental studies.     

Regional VS30 model for the St. Lawrence Lowlands,Eastern Canada

Shear-wave velocity of the top 30?m, V_S30, is commonly used for prediction of the seismic site response. This paper presents development, validation and uncertainty assessment of a regional V_S30 model based on a combination of simplified 3D geology and statistically representative velocity values. Results identify soft marine sediments in deep sedimentary basins as zones most susceptible to seismic shaking. Compared to the available urban-scale seismic zonation studies, the regional model showed a success rate of roughly 64% in predicting local site category. The standard deviation was in average 30% of the expected V_S30 value.     

Putting the principles of the Sustainable Livelihoods Approach into fisheries development policy and practice

The Sustainable Livelihoods Approach (SLA) combines a conceptual framework with a set of operational principles to provide guidance on policy formulation and development practice. The SLA has been widely used in coastal and fisheries development research and has informed the design of development programmes but experience of operationalising it remains largely undocumented. In the Sustainable Fisheries Livelihoods Programme, which involves 25 West African countries, the SLA has helped to align fisheries policy with wider poverty reduction initiatives and to identify means of contributing to poverty reduction that do not directly increase pressure on fully or over-exploited fish resources.