Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Long-Term Changes in Water Quality and Productivity in the Patuxent River Estuary: 1985 to 2003

We conducted a quantitative assessment of estuarine ecosystem responses to reduced phosphorus and nitrogen loading from sewage treatment facilities and to variability in freshwater flow and nonpoint nutrient inputs to the Patuxent River estuary. We analyzed a 19-year dataset of water quality conditions, nutrient loading, and climatic forcing for three estuarine regions and also computed monthly rates of net production of dissolved O₂ and physical transport of dissolved inorganic nitrogen (DIN) and phosphorus (DIP) using a salt- and water-balance model. Point-source loading of DIN and DIP to the estuary declined by 40–60% following upgrades to sewage treatment plants and correlated with parallel decreases in DIN and DIP concentrations throughout the Patuxent. Reduced point-source nutrient loading and concentration resulted in declines in phytoplankton chlorophyll-a (chl-a) and light-saturated carbon fixation, as well as in bottom-layer O₂ consumption for upper regions of the estuary. Despite significant reductions in seaward N transport from the middle to lower estuary, chl-a, turbidity, and surface-layer net O₂ production increased in the lower estuary, especially during summer. This degradation of water quality in the lower estuary appears to be linked to a trend of increasing net inputs of DIN into the estuary from Chesapeake Bay and to above-average river flow during the mid-1990s. In addition, increased abundance of Mnemiopsis leidyi significantly reduced copepod abundance during summer from 1990 to 2002, which favored increases in chl-a and allowed a shift in total N partitioning from DIN to particulate organic nitrogen. These analyses illustrate (1) the value of long-term monitoring data, (2) the need for regional scale nutrient management that includes integrated estuarine systems, and (3) the potential water quality impacts of altered coastal food webs.     

Tracing the exhumation of the Eclogite Zone (Tauern Window,Eastern Alps) by <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of white mica in eclogites

New radiometric ages from the Subpenninic nappes (Eclogite Zone and Rote Wand – Modereck Nappe, Tauern Window) show that phengites formed under eclogite-facies metamorphic conditions retain their initial isotopic signature, even when associated lithologies were overprinted by greenschist- to amphibolite-facies metamorphism. Different stages of the eclogite-facies evolution can be dated provided ⁴⁰Ar/³⁹Ar dating is combined with micro-structural analyses. An age of 39 Ma from the Rote Wand – Modereck Nappe is interpreted to be close to the burial age of this unit. Eclogite deformation within the Eclogite Zone started at the pressure peak along distinct shear zones, and prevailed along the exhumation path. An age of ca. 38 Ma is only observed for eclogites not affected by subsequent deformation and is interpreted as maximum age due to the possible influence of homogenously distributed excess argon. During exhumation deformation was localised along distinct mylonitic shear zones. This stage is mainly characterised by the formation of dynamically recrystallized omphacite2 and phengite. Deformation resulted in the resetting of the Ar isotopic system within the recrystallized white mica. Flat argon release spectra showing ages of 32 Ma within mylonites record the timing of cooling along the exhumation path, and the emplacement onto the Venediger Nappe. Ar-release patterns and ³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar isotope correlation analyses indicate no significant ⁴⁰Ar-loss after initial closure, and only a negligible incorporation of excess argon. From the pressure peak onwards, eclogitic conditions prevailed for almost 8–10 Ma.     

Probabilistic modeling of seismically triggered landslides using Monte Carlo simulations

The 2004 Chuetsu earthquakes of Niigata (Japan) triggered numerous landslides, and the most widespread types of landslides were highly disrupted, relatively shallow slides and soil (debris) flows. This paper presented a method to evaluate slope instability using Newmark displacement on a pixel-by-pixel basis in a given area. The proposed method was able to integrate Newmark displacement modeling and Monte Carlo simulations within geographical information systems. In the modeling, an empirical attenuation relationship was utilized to calculate Arias intensity over this study area, and the variability of geotechnical parameters was taken into account to calculate coseismic landslide displacement. Before deriving the displacement from related inputs, the Monte Carlo simulations ran 1,500 times and generated 1,500 displacement values for each grid cell, and then means and standard deviations of displacement were calculated and probabilistic distributions can be obtained. Finally, given 10 cm as a threshold value of displacement, estimated probabilities of displacement exceeding 10 cm were shown as a map of seismic landslide hazards. The resulting hazard map was classified into four categories from very low to high level.     

Slope inclinometers for landslides

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.     

Effect of volatiles erupted from Mesozoic and Cenozoic volcanic activities on paleo-environmental changes in China

Based on the determination of composition of volcanic volatiles and petrologic estimation of the total mass of volatiles erupted, we showed important advances in the study of the impact of Mesozoic and Cenozoic volcanic activities on paleo-environmental changes in China. The volcanic activities include western Liaoning and Zhangjiakou Mesozoic intermediate-acidic explosive eruptions, southern Tibet and Shanwang Cenozoic volcanism, and Mt. Changbai volcanic eruption around one thousand years ago. The paper predominantly discusses the earth’s surface temperature changes, ozone depletion, acidic rain formation and mass mortalities of vertebrate induced by the Mesozoic and Cenozoic volcanism in China. __________ Translated from Bulletin of Mineralogy, Petrology and Geochemistry, 2007, 26(4): 319–322 [译自: 矿物岩石地球化学通报]     

抚顺煤层气赋存特征及资源评价研究

抚顺矿区城市下压煤面积6km^2,煤炭储量23901．5万t。通过对矿区地质特征、煤储层特征分析．认为区内煤层气含量高（9．81～24．53m^3／t）,煤层中大空隙多,透气性好,渗透率较高（0．24～3．60mD）。煤层直接顶板为厚100m左右的致密油页岩,底板为泥岩、凝灰岩,具有良好的封闭条件。根据矿区多年测试资料,采用容积法得出区内煤层气资源量为30．53亿m^3。综合开发煤层气资源符合东北老矿区的实际,其将为复苏东北重工业基地提供有效的洁净能源。     

煤层气固井声幅测井方法探讨

影响煤层气固井声幅测井的因素较多,如地层软硬变化大、套管内径或壁厚不均、仪器不居中、发射能量不足、接收灵敏度不够等,这些因素的存在将会导致首波丢失、时差曲线产生周波跳跃或波动现象。为提高煤层气固井声幅测井质量,要尽量保证所用仪器外径接近套管内径,以减少无效传播和能量损失,另外需提高仪器的发射能量及接收灵敏度;在自由套管和声波强吸收地层,必须保证自由套管首波不限幅、声波强吸收地层首波不丢失。在现场解释时,一般以＂自由套管＂处的偏转幅度值A为标准,将固井声幅曲线幅度的20%A和40%A作为分界点,评价固井效果。     

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.     

The Tau Model for Data Redundancy and Information Combination in Earth Sciences: Theory and Application

Many decision-making processes in the Earth sciences require the combination of multiple data originating from diverse sources. These data are often indirect and uncertain, and their combination would call for a probabilistic approach. These data are also partially redundant with each other or with all others taken jointly. This overlap in information arises due to a variety of reasons—because the data arises from the same geology, because they originate from the same location or the same measurement device, etc. The proposed tau model combines partially redundant data, each taking the form of a prior probability for the event being assessed to occur given that single datum. The parameters of that tau model measure the additional contribution brought by any single datum over that of all previously considered data; they are data sequence-dependent and also data value-dependent. Data redundancy depends on the sequence in which the data is considered and also on the data values themselves. However, for a given sequence, averaging the tau model parameters over all possible data values leads to exact analytical expressions and corresponding approximations and inference avenues. Information on multiple-point connectivity of permeability arrives from core data, well-test data and seismic data which are defined over varying supports with complex redundancy between these information sources. In order to compute these tau weights for determining connectivity, one needs a model of data redundancy, here expressed as a vectorial training image (Ti) constructed using a prior conceptual knowledge of geology and the physics of data measurement. From such a vectorial Ti, the tau weights can be computed exactly. Neglecting data redundancy leads to an over-compounding of individual data information and the possible risk of making extreme decisions.