A multiple linear statistical model for estimating the mean maximum urban heat island

Summary ¶This study examines the spatial and quantitative influence of urban factors on the surface air temperature field of the medium-sized of Szeged, Hungary, using mobile measurements under different weather conditions in the periods of March 1999–February 2000 and April–October 2002. Efforts have been concentrated on the development of the urban heat island (UHI) in its peak development during the diurnal cycle. Tasks included: (1) determination of spatial distribution of mean maximum UHI intensity and some urban surface parameters (built-up and water surface ratios, sky view factor, building height) using the standard Kriging procedure, as well as (2) development of a statistical model in the so-called heating and non-heating seasons using the above mentioned parameters and their areal extensions. In both seasons the spatial distribution of the mean maximum UHI intensity fields had a concentric shape with some local irregularities. The intensity reaches more than 2.1°C (heating season) and 3.1°C (non-heating season) in the centre of the city. For both seasons statistical model equations were determined by means of stepwise multiple linear regression analysis. As the measured and calculated mean maximum UHI intensity patterns show, there is a clear connection between the spatial distribution of the urban thermal excess and the examined land-use parameters, so these parameters play an important role in the evolution of the strong UHI intensity field. From the above mentioned parameters the sky-view factor and the building height were the most determining factors which are in line with the urban surface energy balance. Therefore in the future, using our model it will be possible to predict mean maximum UHI intensity in other cities, which have land-use features similar to Szeged.Received September 26, 2002; revised February 25, 2003; accepted March 22, 2003 Published online July 30, 2003     

Alkaline fluid circulation in ultramafic rocks and formation of nucleotide constituents: a hypothesis

Seawater is constantly circulating through oceanic basement as a low-temperature hydrothermal fluid (<150°C). In cases when ultramafic rocks are exposed to the fluids, for instance during the initial phase of subduction, ferromagnesian minerals are altered in contact with the water, leading to high pH and formation of secondary magnesium hydroxide, among other – brucite, that may scavenge borate and phosphate from seawater. The high pH may promote abiotic formation of pentoses, particularly ribose. Pentoses are stabilized by borate, since cyclic pentoses form a less reactive complex with borate. Analyses have shown that borate occupies the 2' and 3' positions of ribose, thus leaving the 5' position available for reactions like phosphorylation. The purine coding elements (adenine, in particular) of RNA may be formed in the same general hydrothermal environments of the seafloor.     

LABORATORIES DE MÉCANIQUE DES FLUIDES DOMAINE UNIVERSITAIRE—38—SAINT-MARTIN d'HERES

Abstract

Artificial recharge is a very suitable approach in the overall water resources management of a given area. What are the matter, the purposes and the past of recharge, the factors and the problems to be taken into account, the methods and the economics of this practice? Those are some questions to which the paper tries to give answers. Several examples are quoted as well as two projects in the Middle-East and North Africa.     

From nappe stacking to exhumation: Cretaceous tectonics in the Apuseni Mountains (Romania)

International Journal of Earth Sciences - New Ar–Ar muscovite and Rb–Sr biotite age data in combination with structural analyses from the Apuseni Mountains provide new constraints on...     

Small-strain behaviour of unsaturated silty clay: experiments and model interpretation

Acta Geotechnica - The experimental data dealing with the so-called small strain stiffness of soils are indispensable in developing and calibrating advanced numerical models. A literature review...     

Controls on the morphological evolution of embayed beaches: Morphometry versus external forcing

The morphological evolution of embayed beaches on a microtidal coast is assumed to largely respond to the degree of exposure to wave conditions, decreasing the mobility with increasing beach indentation (and vice versa). However, the number of sediment arrivals at the beach or the impact of extreme storms can modify this relationship. Here, we present an analysis of 10 embayed beaches along the Catalan coast with different morphometric and sedimentary characteristics to identify the most relevant parameters controlling the morphological evolution of these embayed beaches at the inter-annual and decadal scales. The study was mostly based on LiDAR topographic data collected from 2012 to 2017, aerial photographs from 1945 to 2021, sediment sampling and a long-term series analysis of the forcing parameters (waves, sea level, precipitation and land-use changes). The results show a net loss of volume on all the studied beaches at an inter-annual scale and a general shoreline retreat during the last few decades, suggesting the influence of common processes on the evolution of the studied beaches. Smaller pocket beaches with medium-to-high indentations are more sensitive to changes induced by local factors and show higher variability in the volume of the emerged beach and shoreline position than larger beaches. The most relevant factors influencing the evolution of the studied beaches on a decadal scale were identified as changes in sea level and the reduction in sediment inputs provided by streams due to land-use changes in the drainage basin. At the inter-annual scale, the impact of extreme events is the main factor controlling beach behaviour. These general trends can be opposite locally for beaches that receive large amounts of sediment via longshore transport from adjacent beaches.     

An Open,Object-Based Framework for Generating Anisotropy in Sedimentary Subsurface Models

The spatial distribution of hydraulic properties in the subsurface controls groundwater flow and solute transport. However, many approaches to modeling these distributions do not produce geologically realistic results and/or do not model the anisotropy of hydraulic conductivity caused by bedding structures in sedimentary deposits. We have developed a flexible object-based package for simulating hydraulic properties in the subsurface—the Hydrogeological Virtual Realities (HyVR) simulation package. This implements a hierarchical modeling framework that takes into account geological rules about stratigraphic bounding surfaces and the geometry of specific sedimentary structures to generate realistic aquifer models, including full hydraulic-conductivity tensors. The HyVR simulation package can create outputs suitable for standard groundwater modeling tools (e.g., MODFLOW), is written in Python, an open-source programming language, and is openly available at an online repository. This paper presents an overview of the underlying modeling principles and computational methods, as well as an example simulation based on the Macrodispersion Experiment site in Columbus, Mississippi. Our simulation package can currently simulate porous media that mimic geological conceptual models in fluvial depositional environments, and that include fine-scale heterogeneity in distributed hydraulic parameter fields. The simulation results allow qualitative geological conceptual models to be converted into digital subsurface models that can be used in quantitative numerical flow-and-transport simulations, with the aim of improving our understanding of the influence of geological realism on groundwater flow and solute transport.     

Nd and Sr isotope study of hydrothermal scheelite and host rocks at Omai, Guiana Shield: implications for ore fluid source and flow path during the formation of orogenic gold deposits

Omai is a high tonnage, low-grade, world-class gold deposit located in the Paleoproterozoic Guiana Shield. It is the second most important gold deposit in the Guiana Shield (after Las Cristinas, Venezuela), and one of the largest in South America (4.0 million oz.). Sm-Nd and Sr isotope data are presented for host rocks and for scheelite from auriferous quartz-carbonate-scheelite-sulfide-telluride veins from the Omai deposit. Gold-bearing veins are hosted by the Paleoproterozoic Barama-Mazaruni Supergroup, a greenstone belt sequence consisting of mafic volcanic rocks interbedded with sedimentary rocks that are intruded by quartz-feldspar porphyry and rhyolite dikes. This lithologic sequence was folded and metamorphosed to lower greenschist facies during the Paleoproterozoic Trans-Amazonian orogeny. The volcano-sedimentary unit was intruded by a post-tectonic quartz monzodiorite-diorite-hornblendite stock. Initial Nd isotope ratios for the Omai volcanic rocks range from ɛ_Nd=+2.1 to +4.2. These values suggest that this part of the Guiana Shield was a site of new crust formation during the Paleoproterozoic and was not contaminated by older (Archean), reworked continental crust. Initial Nd isotope ratios for the Omai stock range between +0.5 and +2.3, which suggest limited contamination with previously formed continental crust. Although the Nd isotopic ratios of gold-related scheelites overlap with those of the host rocks, particularly the tholeiitic basalts at the interpreted time of vein emplacement, the lack of both isotopic mixing and significant Nd movement during the hydrothermal process suggest that the Nd isotope composition can be used to determine the isotopic characteristics of the ore fluid source area. At Omai, the ore fluid is largely derived from a radiogenic Nd source, represented by mantle or lower crustal reservoirs. Strontium isotope ratios for the scheelites cluster tightly between 0.7019 and 0.7021. The Sr isotope data suggest that unlike Nd, Sr was significantly mobile during the hydrothermal process. The fluids responsible for the Omai deposit may have picked up Sr along the flow path. The constant low Sr isotope values of scheelites probably reflect the key role that the local tholeiitic basalts played as the main source of Sr in the fluids. Whereas Nd isotopes identify the fluid source area, the Sr isotopes map the fluid flow paths. Received: 11 February 1999 / Accepted: 1 November 1999