太湖MS岩芯重金属元素地球化学形态研究

采用BCR三步提取法对太湖MS岩芯沉积物中Cu、Fe、Mn、Ni、Pb和Zn等6种重金属元素的化学形态进行了研究.结果表明,有效结合态的Cu、Ni和Pb主要以有机物及硫化物结合态、Fe-Mn氧化物结合态存在,Fe和Zn主要以Fe-Mn氧化物结合态存在,Mn主要以可交换态及碳酸盐结合态存在;Fe-Mn氧化物结合态的Ni、Pb和Zn与可还原态的Mn有较好的正相关关系,有机物及硫化物结合态的Cu、Mn、Ni、Pb和Zn与有机碳含量有较好的正相关关系;重金属形态分布体现了重金属元素地球化学性质的差异,以及重金属形态含量与沉积物理化性质的关系.沉积岩芯重金属元素形态垂向变化规律及次生相富集系数表明,Cu、Mn、Ni、Pb和Zn在沉积岩芯13～4 cm有效结合态含量较稳定,为自然沉积;4～0 cm有效结合态含量明显升高,存在一定程度的人为污染.根据137Cs测年结果判断,沉积岩芯Cu、Mn、Ni、Pb和Zn等重金属污染开始于20世纪70年代末期,主要污染元素及污染历史与太湖流域污染工业类型及经济发展阶段相吻合.     

太湖沉积物中重金属的地球化学形态及特征分析

用连续提取法分析了太湖沉积物5种重金属的地球化学形态,对地球化学形态的组成和地理特征进行了分析研究.重金属地球化学形态配分的共同特点是可交换态最低,残渣态最高.两种形态中Cd的可交换态最高,Cr的残渣态最高,可交换态最低.Cd的碳酸盐态较高,Cr的最低;Pb、Cd的Fe-Mn氧化态较高,Cu的偏低;Cu的有机态最高,Cd的最低;Zn的地球化学形态比例大都处于中间.地域上变化较大的元素是Cd和Cu,变化不明显的元素有Pb和Zn.化学成分中Fe2O3、MnO与重金属地球化学形态的相关性最好,TOC与Cu的形态相关系数最高.综合对比分析表明,太湖沉积物重金属的生物有效性以Cd为最高,其次为Pb.     

辽河油田稠油中贵金属分布和赋存状态研究

以辽河油田稠油为研究对象,通过原子吸收光谱、实沸点蒸馏等手段,研究了辽河油田稠油中Au、Ag、Pt和Pb等贵金属在不同馏分中的分布特征.结果表明,经过实沸点蒸馏后,贵金属不同沸程温度的原油馏分中含量和分布存在很大差异,Au、Ag、Pt、Pd主要集中在渣油馏分中,在沸点》508℃的渣油馏分中Au、Ag、Pt、Pd的比例分别是93.4%、76.9%、73.4%和68.0%;采用选择性萃取的方法对金在稠油中的存在形态的初步研究发现,金在稠油中主要以有机配合物和少量无机配合物形式存在.     

SWAT-based runoff and sediment simulation in a small watershed,the loessial hilly-gullied region of China:capabilities and challenges

Model calibration and validation are necessary before applying it for scenario assessment and watershed management.This study presented the methodology of evaluating Soil and Water Assessment Tool(SWAT) and tested the feasibility of SWAT on runoff and sediment load simulation in the Zhifanggou watershed located in hilly-gullied region of China.Daily runoff and sediment event data from 1998-2008 were used in this study;data from 1998-2003 were used for calibration and 2004-2008 for validation.The evaluation statistics for the daily runoff simulation showed that the model results were acceptable,but the model underestimated the runoff for high-flow events.For sediment load simulation,the SWAT performed well in capturing the trend of sediment load,while the model tended to underestimate sediment load during both the calibration and validation periods. The disparity between observed and simulated data most likely resulted from limitations of the existing SCS-CN and MUSLE methods in the model.This study indicated that the modification of SWAT components is needed to take rainfall intensity and its duration into account to enhance the model performance on peak flow and sediment load simulation during heavy rainfall season.     

Design principle for parameters and interferences of tungsten carbide insert interface on roller bits

The lifetime of roll-bits with inserted tooth will be obviously decreased while drilling in strata and the tungsten carbide can be integrally separated from the roll-cone,which will need more trip out time to replace the roller bit.This study provides an entire analysis on stress as well as strength for teeth and tooth holes in loaded conditions.Qualities of tooth drop from matrix within roller bit.The optimized interferences of teeth inserted into the bit can be reasonably obtained by the critical interference derived from some relevant influence factors on the tooth-fixing quality of roller bits.     

Design and development of safety evaluation system of buildings on a seismic field based on the network platform

This paper describes a set of on-site earthquake safety evaluation systems for buildings, which were developed based on a network platform. The system embedded into the quantitative research results which were completed in accordance with the provisions from Post-earthquake Field Works, Part 2: Safety Assessment of Buildings, GB18208.2-2001, and was further developed into an easy-to-use software platform. The system is aimed at allowing engineering professionals, civil engineeing technicists or earthquake-affected victims on site to assess damaged buildings through a network after earthquakes. The authors studied the function structure, process design of the safety evaluation module, and hierarchical analysis algorithm module of the system in depth, and developed the general architecture design, development technology and database design of the system. Technologies such as hierarchical architecture design and Java EE were used in the system development, and My SQL5 was adopted in the database development. The result is a complete evaluation process of information collection, safety evaluation, and output of damage and safety degrees, as well as query and statistical analysis of identified buildings. The system can play a positive role in sharing expert post-earthquake experience and promoting safety evaluation of buildings on a seismic field.     

中国地质学会第八届“黄汲清青年地质科学技术奖”评选揭晓

<正>2016年12月,中国地质学会"黄汲清青年地质科学技术奖"基金管理委员会召开第八届"黄汲清青年地质科学技术奖"终评会议。经审议候选人材料、无记名投票,评选产生了中国地质学会第八届"黄汲清青年地质科学技术奖",共计14名获奖者。其中,科研奖5人、野外奖7人、教师奖2人。黄汲清青年地质科学技术奖已在社会上产生良好声望,并在地质界成为最有影响力的面向广大青年地质科技工作     

激光雷达测量技术在地学中的若干应用

对激光雷达测量技术在全球冰川监测、局部断裂带提取、滑坡监测和稳定性评价以及海岸线提取和海岸侵蚀等方面的应用做了较为全面的综述.作为一种新型的对地观测手段,激光雷达(含星载、机载、车载和地面)的应用已经从传统的测绘扩大到包括文物保护在内的诸多其他应用领域.所综述的激光雷达技术在地学研究中的4个应用方面,是传统地学研究中与全球变化和人居环境最为密切的方向.分析表明,激光雷达技术在这些研究方向中的应用大有作为.      

基于二维经验模态分解的重磁异常分离

由于地质过程的复杂性及成矿过程的多期次叠加性,原始重磁异常往往是多种地质因素的混合信息,既包含区域背景异常信息,也包含与矿床(体)、矿化蚀变带以及隐伏岩体等与找矿密切相关的地质要素所引起的局部重磁异常.如何从复杂的叠加重磁异常中分离出具有找矿意义的局部异常,是当前矿产勘查和资源潜力评价工作中面临的难题之一.采用经验模态分解(EMD)方法来分解重磁异常,为提高分解的稳健性提出了用双调和样条插值(BSI)进行包罗面插值的新方法,并以云南个旧地区重磁数据为例,对其进行非线性多尺度分解,实现对区域异常与局部重磁异常的分离,揭示了深层次找矿信息并拓宽了经验模态分解方法的应用领域.