Numerically quantifying energy loss caused by squirt flow

In interconnected microcracks, or in microcracks connected to spherical pores, the deformation associated with the passage of mechanical waves can induce fluid flow parallel to the crack walls, which is known as squirt flow. This phenomenon can also occur at larger scales in hydraulically interconnected mesoscopic cracks or fractures. The associated viscous friction causes the waves to experience attenuation and velocity dispersion. We present a simple hydromechanical numerical scheme, based on the interface-coupled Lamé–Navier and Navier–Stokes equations, to simulate squirt flow in the frequency domain. The linearized, quasi-static Navier–Stokes equations describe the laminar flow of a compressible viscous fluid in conduits embedded in a linear elastic solid background described by the quasi-static Lamé–Navier equations. Assuming that the heterogeneous model behaves effectively like a homogeneous viscoelastic medium at a larger spatial scale, the resulting attenuation and stiffness modulus dispersion are computed from spatial averages of the complex-valued, frequency-dependent stress and strain fields. An energy-based approach is implemented to calculate the local contributions to attenuation that, when integrated over the entire model, yield results that are identical to those based on the viscoelastic assumption. In addition to thus validating this assumption, the energy-based approach allows for analyses of the spatial dissipation patterns in squirt flow models. We perform simulations for a series of numerical models to illustrate the viability and versatility of the proposed method. For a 3D model consisting of a spherical crack embedded in a solid background, the characteristic frequency of the resulting P-wave attenuation agrees with that of a corresponding analytical solution, indicating that the dissipative viscous flow problem is appropriately handled in our numerical solution of the linearized, quasi-static Navier–Stokes equations. For 2D models containing either interconnected cracks or cracks connected to a circular pore, the results are compared with those based on Biot's poroelastic equations of consolidation, which are solved through an equivalent approach. Overall, our numerical simulations and the associated analyses demonstrate the suitability of the coupled Lamé–Navier and Navier–Stokes equations and of Biot's equations for quantifying attenuation and dispersion for a range of squirt flow scenarios. These analyses also allow for delineating numerical and physical limitations associated with each set of equations.     

A high-resolution operational forecast system for oil spill response in Belfast Lough

This paper presents a high-resolution operational forecast system for providing support to oil spill response in Belfast Lough. The system comprises an operational oceanographic module coupled to an oil spill forecast module that is integrated in a user-friendly web application. The oceanographic module is based on Delft3D model which uses daily boundary conditions and meteorological forcing obtained from COPERNICUS and from the UK Meteorological Office. Downscaled currents and meteorological forecasts are used to provide short-term oil spill fate and trajectory predictions at local scales. Both components of the system are calibrated and validated with observational data, including ADCP data, sea level, temperature and salinity measurements and drifting buoys released in the study area. The transport model is calibrated using a novel methodology to obtain the model coefficients that optimize the numerical simulations. The results obtained show the good performance of the system and its capability for oil spill forecast.     

Laboratory measurements of seismic attenuation and Young's modulus dispersion in a partially and fully water‐saturated porous sample made of sintered borosilicate glass

We measured the extensional‐mode attenuation and Young's modulus in a porous sample made of sintered borosilicate glass at microseismic to seismic frequencies (0.05–50 Hz) using the forced oscillation method. Partial saturation was achieved by water imbibition, varying the water saturation from an initial dry state up to ～99%, and by gas exsolution from an initially fully water‐saturated state down to ～99%. During forced oscillations of the sample effective stresses up to 10 MPa were applied. We observe frequency‐dependent attenuation, with a peak at 1–5 Hz, for ～99% water saturation achieved both by imbibition and by gas exsolution. The magnitude of this attenuation peak is consistently reduced with increasing fluid pressure and is largely insensitive to changes in effective stress. Similar observations have recently been attributed to wave‐induced gas exsolution–dissolution. At full water saturation, the left‐hand side of an attenuation curve, with a peak beyond the highest measured frequency, is observed at 3 MPa effective stress, while at 10 MPa effective stress the measured attenuation is negligible. This observation is consistent with wave‐induced fluid flow associated with mesoscopic compressibility contrasts in the sample's frame. These variations in compressibility could be due to fractures and/or compaction bands that formed between separate sets of forced‐oscillation experiments in response to the applied stresses. The agreement of the measured frequency‐dependent attenuation and Young's modulus with the Kramers–Kronig relations and additional data analyses indicate the good quality of the measurements. Our observations point to the complex interplay between structural and fluid heterogeneities on the measured seismic attenuation and they illustrate how these heterogeneities can facilitate the dominance of one attenuation mechanism over another.     

Polarimetric receiver in the forty gigahertz band: new instrument for the Q-U-I joint Tenerife experiment

This paper describes the analysis, design and characterization of a polarimetric receiver developed for covering the 35 to 47 GHz frequency band in the new instrument aimed at completing the ground-based Q-U-I Joint Tenerife Experiment. This experiment is designed to measure polarization in the Cosmic Microwave Background. The described high frequency instrument is a HEMT-based array composed of 29 pixels. A thorough analysis of the behaviour of the proposed receiver, based on electronic phase switching, is presented for a noise-like linearly polarized input signal, obtaining simultaneously I, Q and U Stokes parameters of the input signal. Wideband subsystems are designed, assembled and characterized for the polarimeter. Their performances are described showing appropriate results within the 35-to-47 GHz frequency band. Functionality tests are performed at room and cryogenic temperatures with adequate results for both temperature conditions, which validate the receiver concept and performance.     

Volcanic emissions and atmospheric pollution:A study of nanoparticles

The influence of emissions of an active volcano on the composition of nanoparticles and ultrafine road dust was identified in an urban area of the Andes.Although many cities are close to active volcanoes,few studies have evaluated their influence in road dust composition.Air quality in urban areas is significantly affected by nonexhaust emissions(e.g.road dust,brake wear,tire wear),however,natural sources such as volcanoes also impact the chemical composition of the particles.In this study,elements from volcanic emissions such as Si>Al>Fe>Ca>K>Mg,and Si-Al with K were identified as complex hydrates.Similarly,As,Hg,Cd,Pb,As,H,Cd,Pb,V,and salammoniac were observed in nanoparticles and ultrafine material.Mineral composition was detected in the order of quartz>mullite>calcite>kaolinite>illite>goethite>magnetite>zircon>monazite,in addition to salammoniac,a tracer of volcanic sources.The foregoing analysis reflects the importance of carrying out more studies relating the influence of volcanic emissions in road dust in order to protect human health.The road dust load(RD₁₀)ranged between 0.8 and 26.8 mg m^?2in the city.     

Complementary use of dating and hydrochemical tools to assess mixing processes involving centenarian groundwater in a geologically complex alpine karst aquifer

Environmental dating tracers (³H, ³He, ⁴He, CFC-12, CFC-11, and SF₆) and the natural spring response (hydrochemistry, water temperature, and hydrodynamics) were jointly used to assess mixing processes and to characterize groundwater flow in a relatively small carbonate aquifer with complex geology in southern Spain. Results evidence a marked karst behaviour of some temporary outlets, with sharp and rapid responses to precipitation events, while some perennial springs show buffer and delayed variations with respect to recharge periods. The general geochemical evolution shows a pattern, from higher to lower altitudes, in which mineralization and the Mg/Ca ratio rise, evidencing longer water–rock interaction. The large SF₆ concentrations in groundwater suggest terrigenic production, whereas CFC-11 values are affected by sorption or degradation. The groundwater age in the perennial springs—as deduced from CFC-12 and ³H/³He—points to mean residence times of several decades, although the large amount of radiogenic ⁴He in samples indicate a contribution of old groundwater (free of ³H and CFC-12). Lumped parameter models and shape-free models were created based on ³H, tritiogenic ³He, CFC-12, and radiogenic ⁴He data in order to interpret the age distribution of the samples. Results evidence the existence of two mixing components, with an old fraction ranging between 160 and 220 years in age. The correlation of physicochemical parameters with some dating parameters, derived from the mixing models, serves to explain the hydrogeochemical processes occurring within the system. Altogether, long residence times are shown to be possible in small alpine systems with a clearly karst behaviour if the geological setting features highly tectonized media including units with diverse hydrogeological characteristics. These findings highlight the importance of applying different approaches, including groundwater dating techniques, when studying such groundwater flow regimes.     

Chemical defenses against generalist fish predators and fouling organisms in two invasive ahermatypic corals in the genus Tubastraea

The introduction of exotic marine species has caused considerable economic and ecological damage around the world. Some of these species possess adaptations such as secondary metabolites which facilitate their successful invasion into new areas. In this study we tested two hypotheses: (i) crude extracts produced by two invasive hard corals Tubastraea coccinea and Tubastraea tagusensis, introduced to the southwest Atlantic, inhibit predation by generalist fish; (ii) substances found in the crude extracts of both species reduce or enhance the settlement of other organisms. In an in situ palatability bioassay the extract of T. tagusensis reduced predation by generalist fish. The extracts of both species of coral showed species‐specific effects on fouling organisms in in situ gel plate bioassays. Control and extract plates had similar total cover, although plates with extracts had significantly fewer Cladophora sp., and Lithophyllum sp. was only detected on control gels. In contrast, a hydrozoan was only found on plates with extracts and overall community ordination demonstrated clear differences in the fouling communities between treatments. These results demonstrate that both coral species have chemical substances which can bring about a negative interaction with potential fish predators and competitors such as algal and invertebrate foulers and the advantage gained could explain their success in invading new regions to the detriment of local fauna and flora.     

Can climate variability information constrain a hydrological model for an ungauged Costa Rican catchment?

Long‐term hydrological data are key to understanding catchment behaviour and for decision making within water management and planning. Given the lack of observed data in many regions worldwide, such as Central America, hydrological models are an alternative for reproducing historical streamflow series. Additional types of information—to locally observed discharge—can be used to constrain model parameter uncertainty for ungauged catchments. Given the strong influence that climatic large‐scale processes exert on streamflow variability in the Central American region, we explored the use of climate variability knowledge as process constraints to constrain the simulated discharge uncertainty for a Costa Rican catchment, assumed to be ungauged. To reduce model uncertainty, we first rejected parameter relationships that disagreed with our understanding of the system. Then, based on this reduced parameter space, we applied the climate‐based process constraints at long‐term, inter‐annual, and intra‐annual timescales. In the first step, we reduced the initial number of parameters by 52%, and then, we further reduced the number of parameters by 3% with the climate constraints. Finally, we compared the climate‐based constraints with a constraint based on global maps of low‐flow statistics. This latter constraint proved to be more restrictive than those based on climate variability (further reducing the number of parameters by 66% compared with 3%). Even so, the climate‐based constraints rejected inconsistent model simulations that were not rejected by the low‐flow statistics constraint. When taken all together, the constraints produced constrained simulation uncertainty bands, and the median simulated discharge followed the observed time series to a similar level as an optimized model. All the constraints were found useful in constraining model uncertainty for an—assumed to be—ungauged basin. This shows that our method is promising for modelling long‐term flow data for ungauged catchments on the Pacific side of Central America and that similar methods can be developed for ungauged basins in other regions where climate variability exerts a strong control on streamflow variability.     

Assessing rheological properties of fluid mud samples through tuning fork data

Ocean Dynamics - At the nautical bottom approach, part of the fluid mud layers can be included in the available depth if they present favorable rheology. As it is difficult to perform in situ...