Workshop summary on physical and chemical properties of potential Earth impactors

Abstract— From 2001 June 17 to 25, we held the first international workshop in Erice, Italy, dedicated to the determination of geological and geophysical properties of near‐Earth objects (NEOs). The goal was to develop a roadmap for determining the physical and chemical properties of NEOs in the coming decades to meet the scientific requirements for development of Earth collision avoidance technology. We identified many properties that are desired, but four measurements are needed most critically for any potentially hazardous NEO: (1) its mass, (2) its mass distribution, (3) its material strengths, and (4) its internal structure. Global (whole‐body) properties, such as material strengths and internal structure, can be determined best from the analyses of permeating waves: artificially initiated seismology and multifrequency reflection and transmission radio tomography. Seismology provides the best geophysical (material strengths) data of NEOs composed of consolidated materials while radio tomography provides the best geological data (e.g., the state of fracture) of electrically nonconducting media. Thus, the two methods are complementary: seismology is most suitable for stony and metallic asteroids, while radio tomography is most appropriate for comet nuclei and carbonaceous asteroids. The three main conclusions are (1) remote sensing for physical characterization should be increased, (2) several dedicated NEO missions should be prepared for geophysical and geological investigations, and (3) that it is prudent to develop and prove the technology to make geophysical measurements on NEOs now.     

Mapping of Ozone and Water in the Atmosphere of Mars near the 1997 Aphelion

We present absolute abundances and latitudinal variations of ozone and water in the atmosphere of Mars during its late northern spring (L_s=67.3°) shortly before aphelion. Long-slit maps of the a¹Δ_g state of molecular oxygen (O₂) and HDO, an isotopic form of water, were acquired on UT January 21.6 1997 using a high-resolution infrared spectrometer (CSHELL) at the NASA Infrared Telescope Facility. O₂(a¹Δ_g) is produced by ozone photolysis, and the ensuing dayglow emission at 1.27 μm is used as a tracer for ozone. Retrieved vertical column densities for ozone above ∼20 km ranged between 1.5 and 2.8 μm-atm at mid- to low latitudes (30°S-60°N) and decreased outside that region. A significant decrease in ozone density is seen near 30°N (close to the subsolar latitude of 23.5°N). The rotational temperatures retrieved from O₂(a-X) emissions show a mean of 172±2.5 K, confirming that the sensed ozone lies in the middle atmosphere (∼24 km). The ν₁ fundamental band of HDO near 3.67 μm was used as a proxy for H₂O. The retrieved vertical column abundance of water varies from 3 precipitable microns (pr-μm) at ∼30°S to 24 pr-μm at ∼60°N. We compare these results with current photochemical models and with measurements obtained by other methods.     

Regeneration and utilization of nutrients during collapse of a <Emphasis Type="Italic">Mesodinium rubrum</Emphasis> red tide and its influence on phytoplankton species composition

High-biomass red tides occur frequently in some semi-enclosed bays of Hong Kong where ambient nutrients are not high enough to support such a high phytoplankton biomass. These high-biomass red tides release massive inorganic nutrients into local waters during their collapse. We hypothesized that the massive inorganic nutrients released from the collapse of red tides would fuel growth of other phytoplankton species. This could influence phytoplankton species composition. We tested the hypothesis using a red tide event caused by Mesodinium rubrum (M. rubrum) in a semi-enclosed bay, Port Shelter. The red tide patch had a cell density as high as 5.0×10⁵ cells L^?1, and high chlorophyll a (63.71 μg L^?1). Ambient inorganic nutrients (nitrate: \(\rm{NO}_3^-\), ammonium: \(\rm{NH}_4^+\), phosphate: \(\rm{PO}_4^{3-}\), silicate: \(\rm{SiO}_4^{3-}\)) were low both in the red tide patch and the non-red-tide patch (clear waters outside the red tide patch). Nutrient addition experiments were conducted by adding all the inorganic nutrients to water samples from the two patches followed by incubation for 9 days. The results showed that the addition of inorganic nutrients did not sustain high M. rubrum cell density, which collapsed after day 1, and did not drive M. rubrum in the non-red-tide patch sample to the same high-cell density in the red tide patch sample. This confirmed that nutrients were not the driving factor for the formation of this red tide event, or for its collapse. The death of M. rubrum after day 1 released high concentrations of \(\rm{NO}_3^-\), \(\rm{PO}_4^{3-}\), \(\rm{SiO}_4^{3-}\), \(\rm{NH}_4^+\), and urea. Bacterial abundance and heterotrophic activity increased, reaching the highest on day 3 or 4, and decreased as cell density of M. rubrum declined. The released nutrients stimulated growth of diatoms, such as Chaetoceros affinis var. circinalis, Thalassiothrix frauenfeldii, and Nitzschia sp., particularly with additions of \(\rm{SiO}_4^{3-}\) treatments, and other species. These results demonstrated that initiation of M. rubrum red tides in the bay was not directly driven by nutrients. However, the massive inorganic nutrients released from the collapse of the red tide could induce a second bloom in low-ambient nutrient water, influencing phytoplankton species composition.     

OSL and ESR studies of Aeolian quartz from the Upper Pleistocene loess sequence of Nussloch (Germany)

As part of a chronological study of the famous Upper Pleistocene Nussloch (Germany) loess sequence, three samples were collected to check the applicability of palaeodosimetric dating methods (OSL and ESR) to quartz grains. The ESR-multicentre method showed a partial bleaching of the ESR centers in aeolian sands. This partial bleaching was also observed by OSL. Laminated loess seemed to be sufficiently bleached but showed a large scatter of the doses, which we ascribed to heterogeneous responses of the luminescent grains to the SAR protocol. Ages could nevertheless be calculated for the three samples and were found to be somewhat older than the IRSL and ¹⁴C ages obtained for the same layers of the laminated loess.     

Improved Determination of the Location of the Temperature Maximum in the Corona

The most used method to calculate the coronal electron temperature [\(T_{\mathrm{e}} (r)\)] from a coronal density distribution [\(n_{\mathrm{e}} (r)\)] is the scale-height method (SHM). We introduce a novel method that is a generalization of a method introduced by Alfvén (Ark. Mat. Astron. Fys. 27, 1, 1941) to calculate \(T_{\mathrm{e}}(r)\) for a corona in hydrostatic equilibrium: the “HST” method. All of the methods discussed here require given electron-density distributions [\(n_{\mathrm{e}} (r)\)] which can be derived from white-light (WL) eclipse observations. The new “DYN” method determines the unique solution of \(T_{\mathrm{e}}(r)\) for which \(T_{\mathrm{e}}(r \rightarrow \infty) \rightarrow 0\) when the solar corona expands radially as realized in hydrodynamical solar-wind models. The applications of the SHM method and DYN method give comparable distributions for \(T_{\mathrm{e}}(r)\). Both have a maximum [\(T_{\max}\)] whose value ranges between 1?–?3 MK. However, the peak of temperature is located at a different altitude in both cases. Close to the Sun where the expansion velocity is subsonic (\(r < 1.3\,\mathrm{R}_{\odot}\)) the DYN method gives the same results as the HST method. The effects of the other free parameters on the DYN temperature distribution are presented in the last part of this study. Our DYN method is a new tool to evaluate the range of altitudes where the heating rate is maximum in the solar corona when the electron-density distribution is obtained from WL coronal observations.     

Dynamics of the Jupiter Trojans with Saturn’s perturbation when the two planets are in migration

In a previous paper (Hou et al. in Celest Mech Dyn Astron 119:119–142, 2014a), the problem of dynamical symmetry between two Jupiter triangular libration points (TLPs) with Saturn’s perturbation in the present configuration of the two planets was studied. A small short-time scale spatial asymmetry exists but gradually disappears with the time going, so the planar stable regions around the two Jupiter TLPs should be dynamically symmetric from a longtime perspective. In this paper, the symmetry problem is studied when the two planets are in migration. Several mechanisms that can cause asymmetries are discussed. Studies show that three important ones are the large short-time scale spatial asymmetry when Jupiter and Saturn are in resonance, the changing orbits of Jupiter and Saturn in the planet migration process, and the chaotic nature of Trojan orbits during the planet migration process. Their joint effects can cause an observable difference to the two Jupiter Trojan swarms. The thermal Yarkovsky effect is also found to be able to cause dynamical differences to the two TLPs, but generally they are too small to be practically observed.     

CCD Photometry of Very Young Open Clusters

We are developing a long term programme to determine abundances of peculiar stars, as a function of age, in open clusters with ages ≤ 5 × 10⁷ yr. A fundamental part will be to deduce the ages and physical properties of these clusters with higher accuracy than in previous studies. As part of this effort we present here CCD uvbyβ photometry of two open clusters, NGC 884 and NGC 869. This revised version was published online in July 2006 with corrections to the Cover Date.     

Character of the O–C Variation of Four W UMa Type Stars: AW UMa, AP Leo, AG Vir and AH Vir

An analysis was carried out of the secular period variation of four WU Ma type stars (AW UMa, AP Leo, AG Vir and AH Vir) using some newly determined times of minima as well as others reported in the literature. It was found that two stars show period increases, one a period decrease and the remaining shows no variation in period. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Mars oxidant experiment (MOx) for Mars '96

The MOx instrument was developed to characterize the reactive nature of the martian soil. The objectives of MOx were: (1) to measure the rate of degradation of organics in the martian environment; (2) to determine if the reactions seen by the Viking biology experiments were caused by a soil oxidant and measure the reactivity of the soil and atmosphere: (3) to monitor the degradation, when exposed to the martian environment, of materials of potential use in future missions; and, finally, (4) to develop technologies and approaches that can be part of future soil analysis instrumentation. The basic approach taken in the MOx instrument was to place a variety of materials composed as thin films in contact with the soil and monitor the physical and chemical changes that result. The optical reflectance of the thin films was the primary sensing-mode. Thin films of organic materials, metals, and semiconductors were prepared. Laboratory simulations demonstrated the response of thin films to active oxidants.