Elasticity of tetragonal end-member majorite and solid solutions in the system Mg4Si4O12-Mg3Al2Si3O12

 The adiabatic elastic moduli of polycrystalline En₅₀Py₅₀ and En₈₀Py₂₀ majorite-garnet solid solutions (where En=4MgSiO₃, Py=Mg₃Al₂Si₃O₁₂) and the end-member En₁₀₀ tetragonal majorite were determined at ambient conditions using Brillouin spectroscopy. The adiabatic bulk modulus, K, and shear modulus, μ, of En₅₀Py₅₀ were found to be K=173.1 (20) and μ=92.3 (10) GPa, and are indistinguishable from those of the end-member pyrope, Py₁₀₀. The moduli of the more majorite-rich samples are significantly lower and are virtually identical to each other (K=162.6(11) and μ=85.7(7) for En₈₀Py₂₀; K=166(5) and μ=88(2) for En₁₀₀). In combination with previously reported moduli for this system, we conclude that both K and μ are constant over the compositional range from Py₁₀₀ to a majorite content of about 70–80%, whereupon the moduli decrease substantially. For compositions ranging from En₈₀Py₂₀ to the end-member majorite, the moduli are also approximately independent of composition, but at a lower value. An alternative model with a continuous decrease in moduli with increasing majorite content cannot be excluded, within the uncertainties of existing measurements. The contrast in moduli between aluminous pyrope garnet and Al-free majorite are small compared with the modulus changes accompanying the pyroxene – majorite phase transformation. Received August 16, 1995 /Revised, accepted January 12, 1996     

Byproduct Formation During the Reduction of TCE by Zero-Valence Iron and Palladized Iron

Trichloroethene (TCE) was reduced with zero-valence iron and palladized iron in zero-head-space extractors. Progress of the reaction in these batch studies was monitored with purge-and-trap gas chromatography and a flame ionization detector. When a 5 ppm initial concentration of TCF. reacts with zero-valence iron, approximately 140 ppb of vinyl chloride persists for as long as 73 days. The concentration of vinyl chloride (approximately If) ppb) remaining with palladized iron is approximately an order of magnitude less than when zero-valence iron is the reductant. These data suggest that volatile byproducts may be under-represented in oilier published data regarding reduction with zero-valence metals. These results also demonstrate that the reduction of TCE with palladized iron (0.05 percent palladium) is more than an order of magnitude faster than with zero-valence iron. Wilh a 5:1 solution-to-solid ratio the TCE half-life with zero-valence iron is 7.41 hours. but is only 0.59 hours with the palladized iron.     

Simulations of a coupled hydro-chemo-mechanical system in rocks

A coupled hydro-chemo-mechanical numerical model is developed for these coupled phenomena in many engineering fields. The model has been applied to predicting the response of a stressed rockmass column to an injected reactive fluid (reagent) flow. The response includes evolutions of porosity, permeability, reagent and mineral concentrations during dissolution. In the model, the progress of dissolution is defined by the change in porosity ratio and the porosity increases with dissolution assuming there is no precipitation. The numerical evolutions of porosity, permeability, reagent and mineral concentrations during dissolution are validated against steady state solutions. The model results show that these evolutions are regulated to a certain extent by the applied external loadings: an applied extensional stress enhances the progress of the dissolution process while an applied compression stress slows the progress of the dissolution process. This revised version was published online in July 2006 with corrections to the Cover Date.     

The causes and environmental effects of land use conversion during agricultural restructuring in Northeast China

During the last decade of the 20th century, extensive conversion in agricultural land use took place in Northeast China. The goal of this study is to ascertain its spatial distribution and regional differentiation, determine its causes, and analyze its environmental impact. Especially we attempt to elucidate how institutional constraints have facilitated the change at a time of agrarian restructuring when newly emerging free market was hybridized with the former planned economy. Information on six categories of land use was mapped from interpretation of Landsat TM images recorded in 1990, 1995 and 2000. Most of land use changes took place during the first half of the decade, coinciding with abrupt and chaotic changes in government directives. Farmland was changed mainly to woodland, water body and built-up areas while woodland and grassland were converted chiefly to farmland. Spatially, the change from farmland to woodland was restricted to the west of the study area. The change from grassland to farmland took place in the grazing and farming interlocked west. These chaotic and occasionally conflicting changes were largely caused by lack of stability and consistency in agricultural land use policies promulgated. They have exerted adverse impacts on the local environment, including land degradation, increased flooding, and modified climate regime.     

Grassland productivity in an alpine environment in response to climate change

Situated in a climatically stressful environment, alpine grassland is sensitive to subtle climate changes in its productivity. We remedy the current deficiency in studying grassland productivity by taking the integrated effect of all relevant factors into consideration. The relative importance of temperature, rainfall and evaporation to the alpine grassland productivity in western China was determined through analysis of their relationship with the normalized difference vegetation index (NDVI) between 1981 and 2000. Climate warming stimulated grassland productivity in the 1980s, but hampered it in the 1990s. Temperature is more important than rainfall to grassland productivity early in the growing season. However, their relative importance is reversed late in the growing season. Monthly summer month rainfall modified by maximum monthly temperature is a good predictor of alpine grassland productivity at 62.0 per cent. However, the best predictor is water deficiency, which is able to improve the estimation accuracy to 78.3 per cent. Hence, the impact of temperature on grassland productivity is better studied indirectly through evaporation.     

Isotopic variability in the aragonite shells of freshwater gastropods living in springs with nearly constant temperature and isotopic composition

We conducted a year-long, intensive monitoring program of live aquatic gastropods (Helisoma duryi, Melanoides tuberculata, Physa virgata, Pyrgulopsis sp., and Tyronia sp.) and their host springs in the Ash Meadows National Wildlife Refuge of southern Nevada. Our purpose was to constrain the degree of natural variation in the isotopic values of shell aragonite for gastropods living in near-constant conditions. Inter- and intraspecies variations, as well as within-shell variations, of δ¹⁸O and δ¹³C values for all taxa were larger than predicted based on variations in environmental conditions alone. This result suggests that different organisms growing in identical or nearly identical environmental conditions may not produce shells with equilibrium isotopic compositions and that these offsets from equilibrium may differ by small, but statistically significant amounts. For the gill-breathing, fully aquatic gastropods M. tuberculata, Pyrgulopsis sp., and Tyronia sp., the deviation of measured isotopic values compared to predicted values based on average environmental conditions were consistent with differences between taxa in the seasonal timing of shell growth. Measured values for the lung-breathing gastropods H. duryi and P. virgata were higher for δ¹⁸O and lower for δ¹³C than predicted at isotopic equilibrium, even when accounting for seasonality effects. We suggest that explaining the differences between the shell isotopic composition of lung- and gill-breathing snails requires a combination of both behavioral and physiologic factors. Our results illustrate the potential complexities of interpreting stable isotopic data from fossil gastropod shells even when environmental conditions are nearly constant, and place limitations on the paleoenvironmental deductions that can be made from the isotopic measurements on fossil gastropods.     

A modelling framework for evaluation of the hydrological impacts of nature‐based approaches to flood risk management,with application to in‐channel interventions across a 29‐km2 scale catchment in the United Kingdom

Nature‐based approaches to flood risk management are increasing in popularity. Evidence for the effectiveness at the catchment scale of such spatially distributed upstream measures is inconclusive. However, it also remains an open question whether, under certain conditions, the individual impacts of a collection of flood mitigation interventions could combine to produce a detrimental effect on runoff response. A modelling framework is presented for evaluation of the impacts of hillslope and in‐channel natural flood management interventions. It couples an existing semidistributed hydrological model with a new, spatially explicit, hydraulic channel network routing model. The model is applied to assess a potential flood mitigation scheme in an agricultural catchment in North Yorkshire, United Kingdom, comprising various configurations of a single variety of in‐channel feature. The hydrological model is used to generate subsurface and surface fluxes for a flood event in 2012. The network routing model is then applied to evaluate the response to the addition of up to 59 features. Additional channel and floodplain storage of approximately 70,000 m³ is seen with a reduction of around 11% in peak discharge. Although this might be sufficient to reduce flooding in moderate events, it is inadequate to prevent flooding in the double‐peaked storm of the magnitude that caused damage within the catchment in 2012. Some strategies using features specific to this catchment are suggested in order to improve the attenuation that could be achieved by applying a nature‐based approach.     

Influence of a coarse interlayer on seawater intrusion and contaminant migration in coastal aquifers

Vertical 2D slice laboratory experiments were carried out in homogenous and layered sand tanks to elucidate the effects of a highly permeable (coarse‐grained sand) interlayer on seawater intrusion and transport of contaminants to a coastal sea. Tidal fluctuations produced oscillations in the seawater–freshwater transition zone, fluctuations of the contaminant infiltration rate and a zigzag contaminant plume outline. The seawater wedge became discontinuous at the (vertical) edges of the interlayer because of increased lateral movement of the seawater–freshwater interface within the interlayer. The contaminant plume formed a tail within the interlayer depending on the tidal stage, and similar to the wedge, its movement was accentuated. A simple analytical model that neglected vertical flow reliably predicted steady‐state seawater intrusion into the coastal aquifer. Numerical modeling was used to gain insight into the groundwater hydrodynamics and contaminant migration. The numerical results confirmed the experimental findings, i.e. that a highly permeable interlayer can provide a rapid transit path for contaminants to reach the seaward boundary and that the interlayer amplifies the effects of tidal fluctuations, resulting in wider transition zones for the seawater wedge and contaminant plume. Numerical simulations further showed that, with increasing interlayer hydraulic conductivity, the maximum seawater intrusion distance inside the interlayer increases approximately linearly. For the fixed‐head contaminant injection condition used, the model showed that contaminant infiltration increases approximately logarithmically with increasing interlayer hydraulic conductivity (other factors held fixed). Copyright © 2013 John Wiley & Sons, Ltd.