Microbial populations in contaminant plumes

Received, May 1999/Revised, October 1999/Accepted, October 1999     

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).     

Orbitolinidae and Alveolinidae (Foraminiferida) from the uppermost Albian-lower Cenomanian of Monti d'Ocre (Abruzzi, Italy)

A biostratigraphic study carried out in the Monti d'Ocre area, Abruzzi, Central Apennines, allowed us to recognize Orbitolina (Conicorbitolina) moulladei ‘Strata 5 (1985) 1’, Praealveolina iberica Reichel and Praealveolina simplex Reichel in uppermost Albian–lower Cenomanian shelf-edge deposits of the Fossato Machè succession. These foraminifers have now been found for the first time in the Apennines of central Italy; their finding is quite important from a palaeobiogeographic viewpoint, as it contributes to the improvement of our knowledge on facies distribution in the circum-Mediterranean regions during the Cretaceous Period. In the study area, the coeval Monte Rotondo and Monte Orsello sections also crop out; these are characterized by bauxite deposits and stratigraphic gaps reflecting episodes of emergence on the carbonate platform. The Monte Rotondo and Monte Orsello sections accumulated in a platform back-reef environment; consequently, in this sector of the Monti d'Ocre area, the depositional environment shifted from a back-reef westward and southward to a shelf-edge northward, during the latest Albian–early Cenomanian. Owing to synsedimentary tectonics, the area investigated underwent differential subsidence: westward and southward, wide areas were uplifted and subjected to emergence, karstification and bauxite accumulation, whereas sedimentation continued in a shelf-edge environment in the north-eastern area.     

Addressing Scottish rural fuel poverty through a regional industrial symbiosis strategy for the Scottish forest industries sector

Tackling fuel poverty is central to the delivery of the Scottish Executive’s commitment to social justice. Many Scottish rural households are not linked into the mains gas network and rely on expensive alternatives, despite being surrounded by plentiful supplies of low-cost renewable wood biomass. A regional study was undertaken to establish the potential market for pelletised wood fuel, available as a low-value by-product from the rapidly expanding Scottish forest industry sector. The wider implications of the research findings are analysed by extending the principles of industrial symbiosis from a site-specific to a regional scale. Promoting an indigenous pellet-based wood fuel market for rural Scotland would fulfil important Scottish Executive economic, social and environmental sustainability objectives. Adding off-site social symbiotic elements increases the potential for on-site technical symbiosis in nascent Scottish forest industry clusters. At present, market failure is preventing the realisation of these benefits, and the paper concludes by identifying ways in which market intermediation, through wood fuel energy service companies, might overcome the current barriers to exploiting such symbiosis.     

Feldspathic clast populations in polymict ureilites: Stalking the missing basalts from the ureilite parent body

Polymict ureilites DaG 164/165, DaG 319, DaG 665, and EET 83309 are regolith breccias composed mainly of monomict ureilite-like material, but containing ∼2 vol% of feldspathic components. We characterized 171 feldspathic clasts in these meteorites in terms of texture, mineralogy, and mineral compositions. Based on this characterization we identified three populations of clasts, each of which appears to represent a common igneous (generally basaltic) lithology and whose mafic minerals show a normal igneous fractionation trend of near-constant Fe/Mn ratio over a range of Fe/Mg ratios that extend to much higher values than those in monomict ureilites. The melts represented by these populations are unlikely to be impact melts, because the ubiquitous presence of carbon in polymict ureilites (the regolith of the ureilite parent body) implies that impact melts would have crystallized under conditions of carbon redox control and therefore have highly magnesian mafic mineral compositions with constant Mn/Mg ratio. Therefore, these melts appear to be indigenous products of igneous differentiation on the ureilite parent body (UPB), complementary to the olivine-pigeonite residues represented by the majority of monomict ureilites.The most abundant population is characterized by albitic plagioclase in association with pyroxenes, phosphates, ilmenite, silica, and incompatible-element enriched glass. Model calculations suggest that it formed by extensive fractional crystallization of the earliest melt(s) of precursor materials from which the most magnesian (shallowest) olivine-pigeonite ureilites formed. A less abundant population, characterized by labradoritic plagioclase, may have formed from melts complementary to more ferroan olivine-pigeonite ureilites, and derived from deeper in the UPB. The third population, characterized by the presence of olivine and augite, could only have formed from melts produced at greater depths in the UPB than the olivine-pigeonite ureilites. Many other feldspathic clasts cannot be positively associated with any of these three populations, because their mafic mineral compositions exhibit carbon redox control. However, they may be products of early crystallization of basaltic melts produced on the UPB, before carbon was exhausted by reduction.Partial melting on the ureilite parent body was a fractional (or incremental) process. Melts were produced early in UPB history, and most likely extracted rapidly, thus preserving primitive chemical and oxygen isotopic signatures in the residues.     

Structure of Réunion Island (Indian Ocean) inferred from the interpretation of gravity anomalies

Réunion is a volcanic edifice whose origin is related to a hot spot in the Indian Ocean. Only 3% of its volume is emergent. Many geological and geophysical studies were carried out on Réunion Island during the 1980's but few of them allow study of the internal structure of the edifice. Several gravity surveys have been carried out on the island since 1976 and we have compiled the available data set. The lack of data on the western side of the island led us to conduct a regional survey in 1993 to obtain a more homogeneous distribution of the stations. Computation of Bouguer anomalies for different correction densities accounts for the variable density of the rocks constituting the edifice and provides a distribution of gravity anomalies interpreted as dense bodies of intrusive rocks inside the edifice. Two very large intrusive complexes can be unambiguously recognised: one beneath Piton des Neiges and one beneath the Grand Brûlé area. Both have been penetrated by geothermal exploration drill holes and the first is also known from outcrop observations. 2.5D simple models were constructed to reveal the geometry and extent of the buried intrusives. They are deeply rooted, extending several kilometres below sea level, and extensive (20–25 km long and 10–13 km wide for the Piton des Neiges complex, 12–15 km long and some kilometres wide for the Grand Brûlé complex). The development of such complexes implies that the activity of the two volcanic centres was long lasting and remained stable while the volcanoes were growing. The Grand Brûlé complex has been interpreted as relics of an old volcano named Alizés Volcano. The interpretation of the gravity maps suggests the presence of a ridge of dense rocks to the North of the axis joining the centres of Piton des Neiges and Piton de la Fournaise volcanoes. By analogy with the other structures, 2.5D models show that this structure would culminate between 0 and 1 km below sea level and be 15 km wide. This complex induces a maximum anomaly in Takamaka Valley and we thus propose to name it Takamaka Volcano. No geological evidence of the nature of these dense rocks is available but the ridge coincides with structures revealed by magnetic and seismic data. Interpretation of the Bouguer anomaly maps suggests that the inner gravity structure of Piton de la Fournaise is not characterised by the presence of a voluminous dense body but probably by more restricted concentrations of dense rocks. Some structures can be recognised: along the present NE and SE rift zones and in the previous central part of Piton de la Fournaise to the West of the present summit. The recent eastward migration of the centre of activity of Piton de la Fournaise accounts for the lack of a large positive anomaly beneath the active craters.     

Abundance, diversity and succession of aquatic Coleoptera and Heteroptera in a cluster of artificial ponds in the North German Lowlands

Our study describes and evaluates environmental influences on assemblages of aquatic Coleoptera and Heteroptera in artificial ponds situated near Lake Steinhude in Lower Saxony (Germany). We determined temporal dynamics and colonization patterns for 14 ponds of different age. In total, we recorded 4941 individuals that represented 87 species of aquatic beetles and bugs. Between 30 and 40 species were found in most of the ponds. Heteropteran species of the families Corixidae and Notonectidae acted as pioneer species in new ponds, while aquatic coleopterans predominated in older ponds. The results of Canonical Correspondence Analyses (CCA) showed that among the key factors affecting community structure were land use, vegetation cover, water chemistry and the age of the ponds. We found that the distribution of adjacent ponds on areas with different land use has a positive influence on the diversity and abundance of the aquatic insect fauna.     

Vulnerabilities,competition and rights in a context of climate change toward equitable water governance in Peru's Rio Santa Valley

As glacial retreat changes the hydrology of Peru's Rio Santa, water demand is growing, pollution is worsening, and competition for water among economic sectors, political jurisdictions and upstream and downstream water users is intensifying. The vulnerability of highland communities, food producers, and poor urban neighborhoods in the Santa watershed in the face of these changes is magnified by inequities in water governance, giving rise to water conflict. Peru's new water regime defines water as an economic good and seeks to centralize control over water. This article analyzes implications of this regime for ensuring equity and managing conflict. It concludes that Peru's water regime is more likely to address equity issues when faced with concerted citizen action.     

A simple method for calculating growth rates of petroleum hydrocarbon plumes

Consumption of aquifer Fe(III) during biodegradation of ground water contaminants may result in expansion of a contaminant plume, changing the outlook for monitored natural attenuation. Data from two research sites contaminated with petroleum hydrocarbons show that toluene and xylenes degrade under methanogenic conditions, but the benzene and ethylbenzene plumes grow as aquifer Fe(III) supplies are depleted. By considering a one-dimensional reaction front in a constant unidirectional flow field, it is possible to derive a simple expression for the growth rate of a benzene plume. The method balances the mass flux of benzene with the Fe(III) content of the aquifer, assuming that the biodegradation reaction is instantaneous. The resulting expression shows that the benzene front migration is retarded relative to the ground water velocity by a factor that depends on the concentrations of hydrocarbon and bioavailable Fe(III). The method provides good agreement with benzene plumes at a crude oil study site in Minnesota and a gasoline site in South Carolina. Compared to the South Carolina site, the Minnesota site has 25% higher benzene flux but eight times the Fe(III), leading to about one-sixth the expansion rate. Although it was developed for benzene, toluene, ethylbenzene, and xylenes, the growth-rate estimation method may have applications to contaminant plumes from other persistent contaminant sources.