基于GIS的煤矿技术信息管理系统的研究与实现

为了全面提高和改善煤矿企业的安全管理水平,针对煤矿空间数据较多的实际情况,本文提出了基于GIS的煤矿技术信息管理系统开发的思路。通过对煤矿地理信息数据进行分类并对其进行分析,提出了系统数据库以及系统功能设计,通过系统专题图功能可进行储量统计分析和地质构造分析等。最后,实践证明该系统运行可靠性较高、稳定性好。     

A constrained LAMBDA method for GPS attitude determination

An improved method to obtain fixed integer ambiguity in GPS attitude determination is presented. Known conditions are utilized as constraints to acquire attitude information when the float solution and its variance–covariance matrix are not accurate enough. The searching ellipsoidal region is first expanded to compensate for errors caused by the inaccurate float solution. Then the constraints are used to shrink the region to a proper size, which maintains the true integer ambiguity. Experimental results demonstrate that this scheme gives a fast search time and a higher success rate in determining the fixed integer ambiguity than the unconstrained method. The accuracy of attitude angles is also improved.

土壤剖面的磁学特征及其对交通污染的指示意义——以北京首都机场高速公路为例

对北京首都机场高速公路旁采集的土壤柱状T01剖面的磁学参数和金属元素分析,探讨了研究区内现代交通导致的土壤磁学性质的变化及其对环境污染的响应.结果表明,磁参数(χ,ARM和SIRM)与重金属含量呈同步垂向变化趋势.来源于交通运输排放的污染物是土壤剖面上部(0～8 cm)磁性和金属含量增强的主要原因,8cm以下,土壤基本未受到污染,磁性矿物和重金属含量较低,磁性颗粒变化稳定,基本代表了该地区土壤的自然背景.尽管土壤岩石磁学分析表明剖面上下部受污染和未受污染样品的磁载体均是粒度较粗的多畴磁铁矿,但是结合磁参数比值曲线,说明底部样品的磁颗粒的粒度较顶部偏细.磁性矿物的含量变化没有影响磁颗粒的粒度特征.指标聚类等相关分析表明,土壤磁参数(χ,ARM和SIRM)与重金属元素(Pb,Zn和Cu)含量显著相关;结合模糊聚类分析,磁参数可用于追踪、识别交通污染物质在土壤剖面中的富集、迁移状态,揭示不同深度土壤的污染程度.     

青藏高原东南缘次林错岩体晚白垩世—早新生代快速剥蚀

青藏高原东南缘是研究构造、地貌演化和气候变化相互作用的理想场所,前人研究主要揭示了晚始新世—早中新世和晚中新世以来的快速剥蚀事件,缺乏晚白垩世—早新生代时期地貌演化过程的研究。次林错花岗岩已有的低温热年代学数据覆盖了整个新生代时期,为探索该区域新生代早期的剥露演化历史提供了重要资料。该岩体新生代早期冷却事件是岩浆冷却单一作用的结果,还是受快速剥蚀作用的影响,目前仍然存疑,需要定量研究。因此,本文结合已有的岩石地化和年代学数据,对次林错花岗岩开展了锆石饱和温度和一维岩浆冷却模拟研究。锆石饱和温度计算结果表明次林错花岗岩的岩浆结晶温度介于647～705℃之间,属低温花岗岩。一维岩浆冷却模拟结果显示岩体侵位时的最小围岩温度为160～120℃,对应深度约为3.7～5.0 km。结合锆石和磷灰石(U-Th)/He年代学数据,本文认为该岩体在晚白垩世—早新生代时期(67～40 Ma)经历了一期剥蚀量至少为2 km的快速剥蚀事件。已发表成果的综合分析表明,此次快速剥露事件可能是整个青藏高原地区广泛存在的构造剥蚀事件,新特提斯洋的俯冲闭合与印亚板块的初始碰撞可能是触发此次大规模区域剥蚀的主要原因。     

全球不同构造环境蛇纹岩全岩和矿物微量元素组成及非传统稳定同位素(Fe-Zn-Cu同位素)特征

蛇纹岩对地球深部和浅部的元素循环以及氧化还原状态调节具有非常重要的作用。蛇纹岩中的流体活动性元素(fluid-mobile element, FME)是揭示地幔岩石水化、脱水以及元素循环的关键。本文系统收集和分析了前人报道的不同构造环境的蛇纹岩矿物化学、全岩微量元素和非传统稳定同位素(Fe、Zn、Cu)的组成特征,试图从多个角度总结蛇纹岩脱水过程的元素迁移规律及流体性质。蛇纹岩主要矿物蛇纹石微量元素含量具有以下主要特征：(1)不同变质程度的蛇纹岩中的蛇纹石既包含轻稀土元素(light rare earth element, LREE)富集,又包含LREE亏损的特征;(2)纤蛇纹石的REE和微量元素分布在利蛇纹石和叶蛇纹石的范围内,利蛇纹石重稀土元素(heavy rare earth element, HREE)整体上略高于叶蛇纹石且更加富集FME;(3)通过中度不相容元素与REE含量相结合,能够较好地区分橄榄石和辉石蛇纹石化所形成的蛇纹石,即辉石形成的蛇纹石富集相容元素(如Sc、Zn、Cr、Y和Ti等)并具有较高的HREE,而橄榄石形成的蛇纹石则表现为平坦且整体较低的REE分布型式。在...     

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.     

Selection of sand models and identification of parameters using an enhanced genetic algorithm

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.     

Characterising deep vadose zone water movement and solute transport under typical irrigated cropland in the North China Plain

Understanding the dynamics and mechanisms of soil water movement and solute transport is essential for accurately estimating recharge rates and evaluating the impacts of agricultural activities on groundwater resources. In a thick vadose zone (0–15 m) under irrigated cropland in the piedmont region of the North China Plain, soil water content, matric potential, and solute concentrations were measured. Based on these data, the dynamics of soil water and solutes were analysed to investigate the mechanisms of soil water and solute transport. The study showed that the 0–15‐m vadose zone can be divided into three layers: an infiltration and evaporation layer (0–2 m), an unsteady infiltration layer (2–6 m), and a quasi‐steady infiltration layer (6–15 m). The chloride, nitrate, and sulphate concentrations all showed greater variations in the upper soil layer (0–1 m) compared to values in the deep vadose zone (below 2 m). The average concentrations of these three anions in the deep vadose zone varied insignificantly with depth and approached values of 125, 242, and 116 mg/L. The accumulated chloride, sulphate, and nitrate were 2,179 ± 113, 1,760 ± 383, and 4,074 ± 421 kg/ha, respectively. The soil water potential and solute concentrations indicated that uniform flow and preferential flow both occurred in the deep vadose zone, and uniform flow was the dominant mechanism of soil water movement in this study. The piston‐like flow velocity of solute transport was 1.14 m per year, and the average value of calculated leached nitrate nitrogen was 107 kg/ha?year below the root zone. The results can be used to better understand recharge processes and improve groundwater resources management.     

冀东迁西—迁安地区紫苏花岗岩的地球化学特征及其成因

本文根据地质和地球化学的研究提出本区紫苏花岗岩主要是由英云闪长质、花岗闪长质岩浆侵位之后经麻粒岩相变质而形成的。根据地球化学特征,本区的紫苏花岗岩可分为大离子亲石元素亏损的北区(太平寨—三屯营)和大离子亲石元素较富集的南区(水厂—松汀),它们的地球化学差异反映了其形成时构造条件的不同。     

上海及其邻区潜在地质灾害的构造背景与成因机理

本文基于上海及其邻区活动断裂构造及有关地区潜在地质灾害特点的研究,论证了上海及其邻区潜在地质灾害的三种基本类型及其构造背景与成因机理;指出:上海及其邻区楔形断裂系统的存在与活动是诱发有关地区潜在地质灾害的主导因素。文中明确指出了上海及其邻区楔形断裂系统的研究在相关地区进行潜在地质灾害评价与预测方面的应用前景与发展方向。