Tropospheric methane in the mid-latitudes of the Southern Hemisphere

Results of more than 800 new measurements of methane (CH₄) concentrations in the Southern Hemisphere troposphere (34–41° S, 130–150° E) are reported. These were obtained between September 1980 and March 1983 from the surface at Cape Grim, Tasmania, through the middle (3.5–5.5 km) to the upper troposphere (7–10 km). The concentration of CH₄ increased throughout the entire troposphere over the measurement period, adding further support to the view that CH₄ concentrations are currently increasing on a global scale. For data averaged vertically through the troposphere the rate of increase found was 20 ppbv/yr or 1.3%/yr at December 1981. In the surface CH₄ data a seasonal cycle with a peak to peak amplitude of approximately 28 ppbv is seen, with the minimum concentration occurring in March and the maximum in September–October. A cycle with the same phase as that seen at the surface, but with a significantly decreased amplitude, is apparent in the mid troposphere but no cycle is detected in the upper tropospheric data. The phase and amplitude of the cycle are qualitatively in agreement with the concept that the major sink for methane is oxidation by hydroxyl radicals. Also presented is evidence of a positive vertical gradient in methane, with a suggestion that the magnitude of this gradient has changed over the period of measurements.     

Estimating Model Parameters from Self-Potential Anomaly of 2D Inclined Sheet Using Whale Optimization Algorithm: Applications to Mineral Exploration and Tracing Shear Zones

The use of spontaneous potential (SP) anomalies is well known in the geophysical literatures because of its effectiveness and significance in solving many complex problems in mineral exploration. The inverse problem of self-potential data interpretation is generally ill-posed and nonlinear. Methods based on derivative analysis usually fail to reach the optimal solution (global minimum) and trapped in a local minimum. A new simple heuristic solution to SP anomalies due to 2D inclined sheet of infinite horizontal length is investigated in this study to solve these problems. This method is based on utilizing whale optimization algorithm (WOA) as an effective heuristic solution to the inverse problem of self-potential field due to a 2D inclined sheet. In this context, the WOA was applied first to synthetic example, where the effect of the random noise was examined and the method revealed good results using proper MATLAB code. The technique was then applied on several real field profiles from different localities aiming to determine the parameters of mineralized zones or the associated shear zones. The inversion parameters revealed that WOA detected accurately the unknown parameters and showed a good validation when compared with the published inversion methods.

     

Hydrogeologic Units Of Lebanon

Based on geomorphologic and hydrogeologic characteristics of its territory, Lebanon is divided into three provinces: the West Lebanon province, the Bekaa province, and the East Anti-Lebanon province. These provinces are subdivided into smaller hydrogeologic units, the basins and subbasins. Significant features used in the subdivision are faults, relief, anticlinal axes, river channels, and water divides. Recharge to groundwater is a percentage of the intake area, the percipitation rate over this area, and the infiltration rate of outcropping rocks. The amounts of recharged water over the three provinces are 1609, 914, and 19 Mm³, respectively. Discharge is surface water from springs and water wells along the Lebanese coast. The discharge from the Lebanese rivers exceeds 3700 Mm³/year, an appreciable amount of which comes from natural springs. The quantity of groundwater pumped by wells or flowing into neighboring countries and to the sea as submarine springs, may exceed 800 Mm³/year.     

3D Gravity Inversion of Northern Sinai Peninsula: A Case Study

The Sinai Peninsula has attracted the attention of many geological and geophysical studies as it is influenced and bounded by major tectonic events. Those are (1) the Mesozoic to Early Cenozoic tectonically active opening of the Tethys, (2) the Late Cretaceous to Early Tertiary (Laramide) Syrian arc system, due to closing of the Tethys (3) the Oligo-Miocene Gulf of Suez rifted basin, and (4) the Late Miocene to Recent transform Dead Sea–Gulf of Aqaba rift. Additionally, the shear zones inside Sinai such as the Ragabet El-Naam and Minsherah-Abu Kandu Shear Zones. Each of these major tectonic events has affected dramatically the structure evolution of the northern Sinai area. The present paper estimates the 3D density contrast model using the gravity data of northern Sinai. The estimated 3D density contrast model elucidated the peculiarities of the main structural elements in the region. The estimated 3D density contrast model showed the high and low gravity anomalies that form the main mountains and main valleys in northern Sinai. The estimated low density zones are in agreement with the inferred faults resulting from the first horizontal derivative. Comparing the 3D model with the tectonic history of the region and the results of the first horizontal derivative and least square separation increased the reliability of the model.     

Water availability for the greening of Kuwait

Water resources for agricultural development and landscape enhancement in Kuwait are very scarce; the quality is saline (brackish), and the soil texture is sandy, incapable of holding nutrients and moisture. Most of the rainfall in Kuwait either evaporates due to the high temperatures or percolates through the soil. The rainfall is not sufficient to recharge the underground water supply. A variety of alternative water sources have been studied, including seawater desalination and wastewater treatment. Wastewater treatment proved to be convenient due to the relatively low salinity detected in the treated water. Furthermore, the amount of wastewater is expected to increase as more residential areas are connected to the sewage system as the population increases.

The development of a greenery plan for Kuwait requires intensive water management. This goal can be achieved through manpower training in landscape development, selection of plants tolerant to arid environments, usage of appropriate irrigation and drainage systems, promotion of greenery programs within public and the governmental agencies for their direct participation in urban area beautification, and extension of wastewater treatment techniques.     

Multiobjective analysis of chaotic dynamic systems with sparse learning machines

Sparse learning machines provide a viable framework for modeling chaotic time-series systems. A powerful state-space reconstruction methodology using both support vector machines (SVM) and relevance vector machines (RVM) within a multiobjective optimization framework is presented in this paper. The utility and practicality of the proposed approaches have been demonstrated on the time series of the Great Salt Lake (GSL) biweekly volumes from 1848 to 2004. A comparison of the two methods is made based on their predictive power and robustness. The reconstruction of the dynamics of the Great Salt Lake volume time series is attained using the most relevant feature subset of the training data. In this paper, efforts are also made to assess the uncertainty and robustness of the machines in learning and forecasting as a function of model structure, model parameters, and bootstrapping samples. The resulting model will normally have a structure, including parameterization, that suits the information content of the available data, and can be used to develop time series forecasts for multiple lead times ranging from two weeks to several months.     

Offshore sand sources for beach replenishment: Potential borrows on the continental shelf of the Eastern Gulf of Mexico

Erosion of sandy beaches is a worldwide problem that elicits innovative geoengineer‐ing techniques to reduce adverse impacts of shoreline retreat. Beach replenishment has emerged as the “soft”; shore‐stabilization technique of choice for mitigating beach erosion. This method of shore protection involves the addition of sand to the littoral sediment budget for sacrificial purposes. Because inland sand sources are often uneconomical or impractical to use, and known nearshore sources are limited, finding adequate quantities of suitable sand on the inner continental shelf is often vital to beach replenishment projects. The technical studies of survey and materials analysis that identify and delineate usable sand sources are sometimes almost as expensive as small‐project dredging, pumping, and placing the sand on the beach as fill. Inadequate quantity or substandard quality of shelf sand, as well as often‐prohibitive overhead expenses, thus compel shoreline managers to seek suitable sand sources offshore.

In the study area off the central‐west coast of Florida, offshore potential borrow areas (PBAs) were identified on the basis of studies conducted in reconnoitory and detailed phases. Sophisticated state‐of‐the‐art equipment used in this investigation provided more detailed subbottom mapping information than is normally obtained with conventional seismic equipment. An example of sand exploration studies was incorporated in a 215‐km² survey of offshore areas by conducting bathymetric surveys and subbottom seismic profiling, collecting jet probes, grab samples, and vibrocores, and analyzing sediment grading in subsamples from vibrocores. These combined analyses indicated that at least 8.8 ×10⁶ m³ of sand is available in potential borrow areas from 7.0 to 12 km offshore in water depths of 8.0 to 11.5 m. In the PBAs, mean grain size of sand falls into the range 0.13–0.53 mm, sorting averages 0.65–1.31ø, and the overall silt content varies from 3.9–8.5%. High silt contents (13–19%) mapped in some areas make these sedimentary deposits unsuitable as fill for artificial beach renourishment.     

Petrological and mineralogical studies of Pan-African serpentinites at Bir Al-Edeid area, central Eastern Desert, Egypt

The studied serpentinites occur as isolated masses, imbricate slices of variable thicknesses and as small blocks or lenses incorporated in the sedimentary matrix of the mélange. They are thrusted over the associated island arc calc-alkaline metavolcanics and replaced by talc-carbonates along shear zones. Lack of thermal effect of the serpentinites upon the enveloping country rocks, as well as their association with thrust faults indicates their tectonic emplacement as solid bodies. Petrographically, they are composed essentially of antigorite, chrysotile and lizardite with subordinate amounts of carbonates, chromite, magnetite, magnesite, talc, tremolite and chlorite. Chrysotile occurs as cross-fiber veinlets traversing the antigorite matrix, which indicate a late crystallization under static conditions. The predominance of antigorite over other serpentine minerals indicates that the serpentinites have undergone prograde metamorphism or the parent ultramafic rocks were serpentinized under higher pressure. The parent rocks of the studied serpentinites are mainly harzburgite and less commonly dunite and wehrlite due to the prevalence of mesh and bastite textures. The serpentinites have suffered regional metamorphism up to the greenschist facies, which occurred during the collisional stage or back-arc basin closure, followed by thrusting over a continental margin. The microprobe analyses of the serpentine minerals show wide variation in SiO₂, MgO, Al₂O₃, FeO and Cr₂O₃ due to different generations of serpentinization. The clinopyroxene relicts, from the partly serpentinized peridotite, are augite and similar to clinopyroxene in mantle-derived peridotites. The chromitite lenses associated with the serpentinites show common textures and structures typical of magmatic crystallization and podiform chromitites. The present data suggest that the serpentinites and associated chromitite lenses represent an ophiolitic mantle sequence from a supra-subduction zone, which were thrust over the continental margins during the collisional stage of back-arc basin.