Soil erosion susceptibility assessment and validation using a geostatistical multivariate approach: a test in Southern Sicily

A certain number of studies have been carried out in recent years that aim at developing and applying a model capable of assessing water erosion of soil. Some of these have tried to quantitatively evaluate the volumes of soil loss, while others have focused their efforts on the recognition of the areas most prone to water erosion processes. This article presents the results of a research whose objective was that of evaluating water erosion susceptibility in a Sicilian watershed: the Naro river basin. A geomorphological study was carried out to recognize the water erosion landforms and define a set of parameters expressing both the intensity of hydraulic forces and the resistance of rocks/soils. The landforms were mapped and classified according to the dominant process in landsurfaces affected by diffuse or linear water erosion. A GIS layer was obtained by combining six determining factors (bedrock lithology, land use, soil texture, plan curvature, stream power index and slope-length factor) in unique conditions units. A geostatistical multivariate approach was applied by analysing the relationships between the spatial distributions of the erosion landforms and the unique condition units. Particularly, the density of eroded area for each combination of determining factors has been calculated: such function corresponds, in fact, to the conditional probability of erosion landforms to develop, under the same geoenvironmental conditions. In light of the obtained results, a general geomorphologic model for water erosion in the Naro river basin can be depicted: cultivated areas in clayey slopes, having fine-medium soil texture, are the most prone to be eroded; linear or diffuse water erosion processes dominate where the topography is favourable to a convergent or divergent runoff, respectively. For each of the two erosion process types, a susceptibility map was produced and submitted to a validation procedure based on a spatial random partition strategy. Both the success of the validation procedure of the susceptibility models and the geomorphological coherence of the relationships between factors and process that such models suggest, confirm the reliability of the method and the goodness of the predictions.     

Environmental hydrogeology of the southern sector of the Samborombon Bay wetland,Argentina

The Samborombon Bay wetland is located on the west margin of the Rio de la Plata estuary, in the Province of Buenos Aires, Argentina. This paper analyses the geological, geomorphologic, soil and vegetation characteristics of the southernmost sector of this wetland and their influence on surface water and groundwater. The study area presents three hydrologic units: coastal dunes, sand sheets and coastal plain. Coastal dunes and sand sheets are recharge zones of high permeability with well-drained, non-saline soils, and a few surface water flows. Changes in the water table are related to rainfall. Groundwater in coastal dunes is Ca–Mg–HCO₃ to Na–HCO₃, and of low salinity (590 mg/l). Groundwater in sand sheets is mainly Na–HCO₃ with a salinity of about 1,020 mg/l. The coastal plain exhibits medium to low permeability sediments, with submerged saline soils poorly drained. Groundwater is Na–Cl with a mean salinity of 16,502 mg/l. A surface hydrological network develops in the coastal plain. Surface water levels near the shoreline are affected by tidal fluctuations; far from the shoreline water accumulates because of poor drainage. Both sectors have Na–Cl water, but the former is more saline. Human intervention and sea level rise may affect the wetland severely.     

Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.     

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

岩矿显微组构对水银洞金矿成因的指示

黔西南水银洞金矿为产于上二叠统龙潭组中的超大型、高品位金矿床,矿床由多个金矿体组成.工业金矿体顺层产于龙潭组含煤地层所夹的玄武质、硅质、生物碎屑碳酸盐岩中.对水银洞金矿赋矿地层岩石以及矿石显微组构进行了研究,矿石中主要载金矿物为细粒黄铁矿,具再生边、粒内孔隙、铸模孔隙结构及镶边生物矿化构造、铸模式生物矿化构造,是一典型的具沉积一成岩组构.金矿化与硅化有密切的成因联系,金与SiO2来源于峨嵋山玄武岩的喷溢活动,主要金矿体更多显示与峨嵋山玄武岩准同生特征.矿床为沉积一成岩弱改造成囚金矿床.     

秦山核电站邻近水域环境化学要素特征

本文根据1989年4、7、10月和1990年1月(春、夏、秋、冬)秦山核电站邻近水域零点生态调查和水质监测结果的资料整理而成。经研究证明,该海域是河-海混合水域,盐度从小于3至12之间变化,受杭州湾的涌潮、风浪的影响,水体混合比较强烈,悬浮颗粒物质的含量比长江口高。由于该测区所处的海岸、海底地形,生态系统、径流输入以及水体交换状况不同,故其海洋学特征也不相同。     

海水中234Th的超低水平液闪谱仪测定

本文提出了利用超低水平液闪谱仪测定海水中234Th的方法.海水经氢氧化铁吸附共沉淀富集后,接着用阴离子交换和TBP/煤油萃取进行Th同位素的分离与纯化.对一系列测定条件进行了详细的研究,提出了测定海水中234Th的适宜程序,即在含有234Th和产额示踪剂230Th的纯化后的5mol/dm3HNO3溶液中加入TBP/煤油进行萃取,然后用0.1mol/dm3HNO3反萃取,后者是先用契伦柯夫计数法测量234Th(通过234mPa),后加入闪烁液Hisafe 3用α/β模式测量α放射体230Th.对于α和β放射体液闪谱仪的计数效率分别为100%和55.7%±2.7%.234Th的化学回收率和总探测效率分别为70%～80%和30%～45%.该法测定海水中的234Th快速、简便和高效.     

合浦珠母贝26S蛋白酶体S4,S7亚基基因片段的分离与分析

26S蛋白酶体是真核生物中一种具有ATP依赖性的蛋白酶复合体,主要通过泛肽途径选择性降解细胞内与代谢调控、细胞周期有关的功能蛋白及异常蛋白,参与多种细胞活动的调控过程。26S蛋白酶体由具有催化活性的20S亚复合体和一个具有调节作用的19S亚复合体组成,其中19S亚复合体中的ATP酶亚基是调节26S蛋白酶体活性的重要组件。本通过简并引物PCR手段,从软体动物合浦珠母贝(Pinctada fucata)中扩增到参与构成19S亚复合体的S4和S7(MSS1)两个亚基的基因片段。这两个基因片段所编码的ATP酶组件包含有Gx4GKT,DEID,SAT和H／QRxGRxxR等26S蛋白酶体ATP酶亚基的共同功能基序。这是首次在软体动物中报道26S蛋白酶体的ATP酶亚基基因序列,为研究软体动物中26S蛋白酶体的结构与功能奠定了分子基础。