Geophysical response of filled sinkholes,soil pipes and associated bedrock fractures in thinly mantled karst,east-central Illinois

Karst aquifers are often protected by a thin mantle of unconsolidated sediment. Soil pipes and sinkholes may breach this natural protective barrier and open pathways for contaminants to quickly reach bedrock aquifers. Geophysical surveys offer a quick and noninvasive way to identify these features; such surveys may also be sequenced to reveal increasing detail in critical areas. At a study site in east-central Illinois, electromagnetic (EM) surveys mapped high conductivity anomalies over filled sinkholes and soil pipes that penetrated the unconsolidated cover. Two-dimensional inverted resistivity sections, made over these anomalies, depict filled sinkholes and soil pipes as conductive zones above deeply weathered bedrock fractures. Borings verified the geophysical models and suggest high conductivities associated with the filled sinkholes are the result of enhanced moisture near active soil pipes. EM surveys also identified conductive zones in the overburden above a probable bedrock fracture linking sinkhole areas 0.5 km apart. Resistivity and EM methods, used in a phased and sequential manner, thus proved useful in mapping filled sinkholes and in delineating the vertical and lateral connections between soil pipes and hydraulically active bedrock fractures.     

Modeling Biogeochemistry,the Key for Understanding Environmental Chemistry of a Semi－Arid Soil in Egypt

1IntroductionThecomponentsoftheenvironmentaredamagedbyagriculturalpractices.Soilslosstheirfer tilityandwaterdeterioratesduetopollution .Chemicalweatheringofmineralandsoiloccursattheinterfacesbetweentheliquidandsolidphases;consequentlythesurfaceareaandcompositionofthemineralsplayanimportantroleinthisprocess.GarrelsandMackenzie ( 1 96 7)suggestedthatincon gruentweatheringreactionswouldproducedissolvedspeciesandnewsolidsthataremorestableintheweatheringenvironmentthantheoriginalbedrockminerals.Ro…     

Transient analysis of wave propagation in non‐homogeneous elastic unbounded domains by using the scaled boundary finite‐element method

The scaled boundary finite‐element method has been developed for the dynamic analysis of unbounded domains. In this method only the boundary is discretized resulting in a reduction of the spatial dimension by one. Like the finite‐element method no fundamental solution is required. This paper extends the scaled boundary finite‐element method to simulate the transient response of non‐homogeneous unbounded domains with the elasticity modulus and mass density varying as power functions of spatial coordinates. To reduce the number of degrees of freedom and the computational cost, the technique of reduced set of base functions is applied. The scaled boundary finite‐element equation for an unbounded domain is reformulated in generalized coordinates. The resulting acceleration unit‐impulse response matrix is obtained and assembled with the equation of motion of standard finite elements. Numerical examples of non‐homogeneous isotropic and transversely isotropic unbounded domains demonstrate the accuracy of the scaled boundary finite‐element method. Copyright © 2006 John Wiley & Sons, Ltd.     

Ground viscosity and stiffness measurements for near surface seismic velocity

In land surveys, the weathering layer can often distort the seismic signal due to it passing through rapid velocity and density changes, dispersion, scattering and inelastic absorption. In a simple spring‐dashpot model for the earth response, an equivalent medium groups these complex phenomena into two parameters only; these are called ground viscosity and ground stiffness. The most recent controllers for vibrators can estimate both parameters. To validate these measurements, Saudi Aramco conducted an experiment measuring ground viscosity and stiffness from two different vibrator control systems over an area of varying terrain conditions, including unconsolidated sand and limestone outcrop. The two systems measured different values, but detected similar trends that correlated well with weathering conditions and surface geology, e.g. lower viscosity values on the outcrop than on the sand. The ratio of ground viscosity to ground stiffness can approximate the shallow S‐wave velocity, which we converted into P‐wave velocity through calibration with sparse uphole data. Static corrections incorporating this velocity information somewhat improved the focusing of seismic time sections. This new approach does not require additional acquisition efforts, and can model shallow complex formations in arid areas where classical static methods often fail.     

Controlling factors of groundwater hydrochemistry in a small island’s aquifer

Factor analysis was applied to the hydrochemical data set of Manukan Island in order to extract the principal factors corresponding to the different sources of variation in the hydrochemistry. The application of varimax rotation was to ensure the clear definition of the main sources of variation in the hydrochemistry. The geochemical data of dissolved major, minor and trace constituents in the groundwater samples indicates the main processes responsible for the geochemistry evolution. By using Kaiser normalization, principal factors were extracted from the data for each location. The analysis reveals that there are four sources of solutes: (1) seawater intrusion; (2) leaching process of underlying rock mediated by pH; (3) minerals weathering process and (4) dissolution of carbonate minerals characterized by high loadings of Ca, Zn and Mg. Such processes are dominated by the significant role of anthropogenic impact from the over abstraction of fresh water from the aquifer. Those factors contributed to the changes of the groundwater geochemistry behavior explain the effect of rising extraction of freshwater from the aquifer.     

Evaluation of Electro-Oxidation of Textile Effluent Using Response Surface Methods

In the present investigation, treatment of textile effluent using an electrochemical technique was designed and analyzed using the Box-Behnken method. The influence of individual parameters on electro-oxidation of textile effluent has been critically examined using the response surface method (RSM), and a quadratic model for chemical oxygen demand (COD) reduction has been developed. It has been observed from the present analysis that the predicted values are in good agreement with experimental data with a correlation coefficient of 0.945.     

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.     

Longitudinal vibration of non-homogeneous earth dams

Two-dimensional analytical elastic models are developed for evaluating dynamic characteristics, namely natural frequencies and modes of vibration of a wide class of earth dams in a direction parallel to the dam axis. In these models the non-homogeneity of the dam materials is taken into account by assuming a specific variation of the stiffness properties along the depth (due to the continuous increase in confining pressure). In addition, both shear and normal (axial) deformations are considered. Cases having constant elastic moduli, linear and trapezoidal variations of elastic moduli, and elastic moduli increasing as the one-half, one-third, two fifths, and a general (l/m)th powers of the depth are studied. Dynamic properties of three real earth dams in a seismically active area (Southern California) estimated from their earthquake records (input ground motion and crest response in the longitudinal direction) as well as results from full-scale dynamic tests on one of these dams (including ambient and forced vibration tests) are compared with those from the suggested models. It was found that the models in which the shear modulus and the modulus of elasticity of the dam material vary along the depth are the most appropriate representations for predicting the dynamic characteristics. The agreement between the experimental and earthquake data and the theoretical results from some of the models is reasonably good.     

Electrochemical studies of sulphides,I. The electrocatalytic activity of galena,pyrite and cobalt sulphide for oxygen reduction in relation to xanthate adsorption and flotation

The electrocatalytic activity of galena, pyrite and Co₃S₄ for oxygen reduction has been studied by potentiostatic methods. Open circuit potentials of the sulphide electrodes have also been measured as a function of pH in nitrogen, air and oxygen atmospheres and also in the presence of H₂O₂ and ethyl xanthate. The adsorption of xanthate on sulphides was followed by observing bubble attachment to the electrodes.The catalytic activity for oxygen (or H₂O₂) reduction (the cathodic currents), the electrode potentials and the xanthate adsorption as shown by bubble attachment within certain pH limits, all varied as $\text{Co}{}_3\text{S}{}_4\text{> pyrite (≈ PbS in H}{}_2\text{O}{}_2\text{) ? PbS}$ indicating considerable dependence of the redox processes in flotation on the d - electron character of the sulphides.In the absence of oxygen, xanthate is probably bonded to the water structure of the surface through hydrogen-bonding, thus keeping the surface hydrophilic. Such adsorption reduces the electrode potential and inhibits oxygen reduction.     

Evidence of the impacting body of the Ries crater — the discovery of Fe-Cr-Ni veinlets below the crater bottom

Fe-Cr-Ni particles and veinlets have been discovered in the top 15 m of the compressed zone with abundant shatter cones below the bottom of the Ries crater. The metallic particles are less than a few microns across. They occur in various minerals along healed intergranular and locally in intragranular microfractures in quartz diorite, amphibolite and chloritized granite of the basement crystalline rocks.The particles consist of major Fe, Cr, and Ni with minor Si and Ca. Origin due to contamination is absolutely ruled out. We believe that these Fe-Cr-Ni particles are probably condensed from the vaporized impacting body which produced the Ries crater. These particles were injected with high velocity into microfractures near the top of the compressed zone, implanted in and across various minerals before these microfractures were resealed. The presence of Si and Ca as well as the fact that the Cr content is nearly twice that of Ni, led us to conclude that the Ries impacting body is very likely not an iron meteorite but a stony meteorite.