Fluidization of buried mass-wasting deposits in lake sediments and its relevance for paleoseismology: Results from a reflection seismic study of lakes Villarrica and Calafquén (South-Central Chile)

A dense grid of very-high resolution seismic profiles on Lake Villarrica provides a quasi-3D view on intercalated lenses of low-amplitude reflections, which are connected by acoustic wipe-out patches and fractures to an underlying voluminous mass-wasting deposit. The lenses are interpreted as being created by earthquake-triggered liquefaction in this buried mass-wasting deposit and subsequent sediment fluidization and extrusion at the paleo-lake bottom. These sediment volcanoes are mapped in detail. They have a rather uniform circular geometry and show a linear relationship between apparent width and maximum thickness on a seismic section. The largest sediment volcanoes are up to 80 m wide and 1.9 m thick. Their slope angles designate a syn- to post-depositional sagging of most sediment volcanoes. Sediment volcano detection and mapping from nearby Lake Calafquén further strengthen the revealed geometrical relationships. Locally, some of the sediment/fluid escape structures extend to a higher position in the stratigraphy, which points to a polyphase escape process associated with multiple multi-century spaced strong earthquakes. Thickness and morphology of the source layer seem to exert a dominant control in the production of sediment/fluid extrusions. This study shows that reflection seismic profiling allowed recognizing 4 different seismic events in the studied stratigraphic interval, which are evidenced by mass-wasting deposits and/or fluidization features.     

Interpretation and modelling of regional gravity data of the Aveiro Basin (Northwest Portugal)

The gravity map of the Aveiro Basin, North West Portugal was produced in 2000/2001 and some limited two dimensional (2D) interpretation was carried out. It is intended in this article to advance the interpretation and modelling of the original Aveiro basin gravity data. Thus, the data were processed and the horizontal gradient, the second vertical derivative and downward continued field computed. The corresponding maps have been processed and a new interpretation of the basin tectonic features has been proposed. This is compared with the previous geological and tectonic information obtained from former surveys and local boreholes. As the next step a more detailed modelling of the Aveiro Basin took place. Bearing the interpretation of the basin tectonic features in mind, several north–south and east–west gravity profiles were established and modelled. The proposed models were presented and discussed. As a result, a comprehensive mass distribution model for the basin was proposed. Finally, comparison was made between the new gravity model and the previously published tectonic features map. This modelling is particularly useful for groundwater protection, exploration and exploitation and also for the dimensioning of drilling operations. Bearing in mind the geomorphology of the basin the gravity method is a very economical tool for the investigation of basin structures.     

Acid leaching of ash and coal: Time dependence and trace element occurrences

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.     

Formation of iron-containing colloids by the weathering of phyllite

The formation of colloids during the weathering of phyllite was investigated by exposing ground phyllite to Milli-Q water. Secondary mineral colloids of 10¹–10² nm were detected in significant concentrations. At pH of about 8.5, the solution concentration of these colloids reached up to 10 mg/L (however, acidification to pH 4.0 prevented the formation of the colloids). The mineralogical composition of the secondary mineral colloids is assumed to be a mixture of ferrihydrite, manganese oxyhydroxides, aluminosilicates, amorphous Al(OH)₃ and gibbsite with possible additions of iron silicates and␣iron-alumino silicates. The colloids were stable over longer periods of time (at least several weeks), even in the presence of suspended ground rock. Direct formation of iron-containing secondary mineral colloids at the rock–water interface by the weathering of rock material is an alternative to the well-known mechanism of iron colloid formation in the bulk of water bodies by mixing of different waters or by aeration of anoxic waters. This direct mechanism is of relevance for colloid production during the weathering of freshly crushed rock in the unsaturated zone as for instance crushed rock in mine waste rock piles. Colloids produced by this mechanism, too, can influence the transport of contaminants such as actinides because these colloids have a large specific surface area and a high sorption affinity.     

Climatic variability in the Late Copper Age: stable isotope fluctuation of prehistoric Unio pictorum (Unionidae) shells from Lake Balaton (Hungary)

Geochemical records of bivalve shells have been increasingly studied in the last decade to obtain information on climate conditions. In this paper we present stable isotope compositions of living and prehistoric shells of freshwater mussels (Unionidae) and their relationships with climate conditions in a shallow lake environment of Lake Balaton, West-Central Hungary. Physical conditions and stable oxygen isotope compositions of lake water samples were monitored where living bivalves were collected. Comparisons between seasonal variations in ambient temperature, water composition and within-shell isotopic variations indicate that the shells of Unio pictorum do reflect local changes at high resolution and thus can be used to study past conditions. Additionally, shells covering the last two decades were gathered at several locations along the lake in order to determine spatial and temporal variations in the shells’ isotopic compositions as a function of weather conditions. As an application, prehistoric shells collected in archaeological excavations were analysed in order to study past environmental variations. Climate variations during the Late Copper Age (5460–4870 cal. yr BP) have been assumed on the basis of geomorphological and archaeozoological observations at the site Balatonkeresztúr-Réti-dűlő (south of Lake Balaton), that suggested increasing humidity as a cause of changes in settlement location and domestic livestock husbandry. Stable carbon and oxygen isotope compositions of prehistoric bivalve shells were analyzed from excavations representing five archaeological subphases (Boleráz subphase, 5460–5310 cal. yr BP; two transitional subphases around 5310 cal. yr BP; Early Classic subphase, 5310–5060 cal. yr BP; Late Classic subphase, 5040–4870 cal. yr BP). The analyses revealed significant negative C and O isotope shifts in the transitional subphases relative to the earlier and later subphases. The isotopic variations indicate that the local climate became relatively wet and possibly cold around 5310 cal. yr BP, then it returned to drier (and likely warmer) conditions during the Classic subphases. This interpretation is in agreement with previous studies on climate changes related to the “5.3 ky event” in the European continental area and the North Atlantic Region, indicating an Atlantic influence in the Carpathian Basin.     

Sr-isotope stratigraphy of the Upper Jurassic of central Portugal (Lusitanian Basin) based on oyster shells

Strontium isotope stratigraphy was performed on oyster shells from the Late Jurassic of the Lusitanian Basin (central Portugal). This represents the first approach to obtain numerical ages for these strata. The new chronostratigraphic data provide a more precise age determination of several units. After a basin-wide hiatus sedimentation in the Late Jurassic is proven in the Cabo Mondego and Cabaços formations to resume as early as the Middle Oxfordian. The Alcobaça formation can be placed in the latest Late Oxfordian to Late Kimmeridgian, while data from the upper part of the Abadia Formation indicate an Early to Late Kimmeridgian age. The Farta Pao formation ranges from the latest Kimmeridgian to the latest Tithonian. The largely synchronous Sobral, Arranhó I, and Arranhó II members are overlain by the late Early to Late Tithonian Freixial Member. The brief, local carbonate incursion of the Arranhó I member marks the Kimmeridgian–Tithonian boundary. Oysters are shown once more to be suitable for strontium isotope studies. Their calcitic shells are often unaffected by diagenesis. In particular for marginal marine Jurassic and Cretaceous strata, where belemnites are usually absent, oysters may serve as a valuable tool for isotope stratigraphy.     

Parabolic Wave Propagation Modelling in Orthogonal Coordinate Systems

This paper presents a numerical model study of the propagation of water waves using the parabolic approximation of the mild-slope equation in the orthogonal coordinate system. Two types of coordinate systems are studied: (a) a general form of orthogonal coordinate system and (b) the conformal system, a special form of orthogonal coordinate system. Two typical examples, namely, expanded breakwaters and a circular channel, are studied to validate the model. First, the examples are studied by use of the general orthogonal coordinates. Then the same examples are computed by use of the confonnal system. The computational results show that the confonnal coordinate system generally gives better predictions than the general orthogonal system. A numerical technique for generating the conformal grid is combined with the numerical model to improve the practicability of the model. The comparison between the result from the numerical grid system and that from the analytical grid system shows that reliable computational results can be obtained by use of the numerical confonnal grid system.     

Detecting Clay Minerals in Hydrothermal Alteration Areas with Integration of ASTER Image and Spectral Data in Kösedag-Zara (Sivas), Turkey

Remote sensing technology and its terrestrial components are more useful than classical geological investigation in mineral exploration and mapping the hydrothermal alteration areas and help to investigate larger areas in short time. Intrusive and volcanic rocks, namely Kösedag syenite and Karatas volcanics in Kösedag (Zara) area shows argillic alteration zones. Two different test area were chosen and sampled for mineralogical studies. XRD-CF investigations showed that kaolinite and illite are the dominant clay minerals in test areas of A and B respectively. The spectroradiometer measurements were carried out 5 times on different surfaces of clayey samples with self-illuminated contact-probe lens within the wavelength range of 350-2500 nm. The spectroradiometer measurements used as endmember were resampled to ASTER short wave infrared (SWIR) bandwidths. Band ratio, principal component and decorrelation stretching analysis were performed to visualize the distribution of clay minerals. In spectral classification method, matched filtering (MF) was used for integrating the satellite image and spectroradiometer measurement data. It was concluded that co-interpretations of the band ratio, principal component, decorrelation stretching analysis, MF results and geological map are very useful in determining, classifying and mapping of the argillic alteration zones related to hydrothermal processes on ASTER image and they seem to be very useful to identify the target areas for mineral exploration.     

苯并（a）芘诱导下岩虫CYP基因的表达特征

Rapid amplification of cDNA ends(RACE) and real-time polymerase chain reaction(RT-PCR) were carried out to analyze the CYP4 gene expression in polychaete Marphysa sanguinea exposed to benzo[a]pyrene(BaP) in this study. The full length of MsCYP4 cDNA was 2 470 bp, and it encoded 512 amino acids. The deduced amino acid sequence showed 47% identity with CYP4 F from frog Xenopus tropicalis and shared high homology with other known CYP4 sequences. To analyse the role of CYP4 in protecting M. sanguinea from BaP exposure, three BaP groups were established: 0.5, 5 and 50 μg/L. Polychaetes were sampled after 3, 7 and 12 d. At 0.5 μg/L, the effect of BaP on MsCYP4 gene expression increased with time prolonged. MsCYP4 gene expression curve showed Ushaped trend with time in 5 and 50 μg/L BaP groups. Therefore, MsCYP4 gene may play an important role in maintaining the balance of cellular metabolism and protecting M. sanguinea from BaP toxicity.