Spatial distribution features and environment effect of heavy metal in intertidal surface sediments of Guanhe estuary, Northern Jiangsu Province

In northern Jiangsu coastal zone area, Guanhe River is the biggest river and has the best navigation conditions among rivers which flow into the Yellow Sea. The grain sizes show gradual increase from the high intertidal zone to lower intertidal zone. The heavy metal values have slight changes along both sides of the river mouth, but show an evident change perpendicular to the tidal flat. In the latter case, they show a good correlation with grain size fluctuation, that is, the heavy metal values gradually decline when the grain size increases from the high intertidal zone to the lower intra-tidal zone. Analyses of the heavy metal elements show that on the Guanhe estuary surface sediment, the content of the elements Hg, As and Cu is above background values; Pb and Zn contents are rather close to the background values; and Cd content is less than the background values. The element Hg comes out to be harmful in a medium level to ecological environment, while the elements of Cr, As, Cu, Pb, Zn and Cd fall in a safe range of MPL. On the whole, Guanhe estuary tidal flat is not very harmful to the ecology in terms of the heavy metals. __________ Translated from Marine Geology & Quaternary Geology, 2007, 27(5): 23–32 [译自: 海洋地质与第四纪地质]     

贵州糯东井田水文地质条件分析

通过对井田内泉和暗河流量的调查研究,认为永宁镇组一、三段碳酸盐岩裂隙溶洞水为井田的主要含水层,含水层主要接受大气降水及河流的渗透补给;煤层上覆地层飞仙关组为相对隔水层,厚度大于500m,下覆无强含水层,其地下水对煤层的开采影响不大,井田水文地质条件较简单。采用比拟法对井田的涌水量进行了预算,推算该矿井开采设计涌水量为13 238m^3/d。     

基于时空分配组合的消防设施服务范围计算方法探讨

基于时空分配组合方法,综合考虑服务时间在主干道路和街区内分配的各种情形,探讨了符合实际需求的消防站点服务范围计算方法.提出了基于多个独立指标的评价消防设施布局方案的方法,对消防规划方案进行评价.最后以武汉市武昌区为例对所提出方法进行了实验,实验结果也验证了该方法的可行性和合理性.     

江西省九岭区地质灾害危险性区划

对九岭区地质灾害发育的基本特征及其地质环境条件进行了概述,并对其形成条件进行了相关性分析;通过对地质灾害发育的基本规律、控制因素、触发因素与地质灾害关系的分析,采用环境地质学原理,建立区域地质灾害空间预测模型,圈定九岭区地质灾害的危险性分区,为实时地质灾害时间预警预报圈定有效的空间靶区。预测单元采用规则的栅格(500m×500m),共14415个单元;评价指标主要包括地形地貌、工程地质岩类、地质构造、破坏地质环境人类工程活动等四大类26个因子;利用GIS技术,提取出相关的数据信息;信息量预测方程:Ii=-1.164X1-0.999X2-0.681X3 …… 0.203X25-0.135X26(其中X1、X2、X3、…X26取1或0,即某单元中存在某种因素时取1、否则取0),据此计算出各单元格的信息量;根据地质灾害危险性分区临界指标,确定单元格的地质灾害危险性等级;合并同类项,并考虑类似的地质、自然环境具有类似的地质灾害问题的原则,进行归并与单元边界线的修改,得出九岭区地质灾害危险性分区。     

Multi-cloud model (MCM) method and its applications to the study on asymmetric spectral profiles

A method of multi-cloud model (MCM) is proposed in this paper in order to research asymmetric profiles of spectral line formed by solar discrete active objects aligned along the line-of-sight difection. Based on the MCM method, under the conditions of certain assumptions and approximations, the line-of-sight velocityV and three other physical parameter approximation values, (i.e. Doppler width _D , source functionS and optical depth at line center ₀) within different clouds may be derived simultaneously by fitting both profiles theoretical and observational. An application example of the method withm=3 shows that MCM method is suitable to measure the velocity fields of multi-object at the same time from their non-Gaussian profiles of complex. TheV and _D derived from the method are reliable,S and ₀ are approximation. An influence of the variations of initial values in the parameter on the solution is given as well.     

Calorimetric study of the coesite-stishovite transformation and calculation of the phase boundary

High temperature drop-solution calorimetry in molten 2 PbO · B₂O₃ at 1044 K for coesite and stishovite polymorphs of silica was carried out to determine the enthalpy of the coesite-stishovite transition. These experiments were performed on high-purity, single-phase samples of coesite and stishovite. Our new value for the enthalpy of the coesitestishovite transition (ΔH ₂₉₈ ⁰ ) is 29.85 ± 0.78 kJ/mol, which is about 35% lower than previously reported by Akaogi and Navrotsky (1984) and Holm et al. (1967), but which compares well with new measurements by Akaogi et al. (1994b). Using these new data, we have calculated the equilibrium phase boundary between coesite and stishovite and obtained a slope, dP/dT=0.0031 (2) GPa/K. This calculated slope is in good agreement with that determined [0.0026 (2) GPa/K] from the in-situ X-ray diffraction study of Zhang et al. (1996).     

Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.     

藏西北三岔口地区泥瓮系生物礁特征及其意义

在羌塘西部的三岔口一带泥盆系拉竹龙组中发现规模较大的生物礁——台地前缘礁。下层礁体厚7．28m，上层礁体厚40.98m。两个礁体均为叠置礁，礁体由礁基、礁核、礁顶组成。剖面显示发育有礁前垮塌角砾、礁格架、礁间及礁后环境。泥盆纪生物礁的发现为羌塘盆地寻找油气资源提供了新思路。     

虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。