Basal Waitemata Group lithofacies: rapid subsidence in an early Miocene interarc basin, New Zealand

The abrupt transition from coastal and shallow shelf sediments to bathyal sediments provides a record of rapid subsidence and deepening of the early Miocene Waitemata basin. Basal shallow marine strata (Kawau Subgroup) accumulated upon a highly dissected surface that overlies deformed Mesozoic metagreywacke. The early Miocene coast was characterized by an embayed and cliffed shoreline with numerous sea stacks and islands. Kawau Subgroup lithofacies, which include pocket beach, shallow shelf and base-of-cliff talus deposits, reflect rapidly changing coastline configuration and water depths as the rugged bedrock surface was buried. The response to continued rapid subsidence and transgression in Waitemata basin was a decrease in the supply of coarse clastic sediment. Beach gravels were locally displaced to greater water depths by avalanching down steep bedrock slopes. The first bathyal turbidite facies, which abruptly overlie the shallow-water Kawau Subgroup, include locally derived sediment gravity flows commonly ponded by remnant bedrock submarine highs. When this local supply of sediment had been exhausted, coarse sediment starvation ensued and bathyal muds accumulated. With the resumption of sediment supply and gradual burial of submarine bedrock relief, submarine fans coalesced and increased in lateral extent. Subsidence of the Waitemata basin to bathyal depths is thought to have occurred in less than a million years. From the above hypothesis, a general model of sedimentation is proposed.     

Sediment suspension under waves and currents: time scales and vertical structure

Field measurements of the vertical structure of near-bed suspended sediment concentrations were obtained from arrays of fast response optical backscatter suspended solids sensors to examine the time-dependent response of sediment resuspension to waves and currents and the constraints imposed by bedforms. Data were recorded from both a nonbarred, marine shoreface and a barred lacustrine shoreface, under both shoaling and breaking waves (significant heights of 0·25–1·50m; peak periods of 3 and 8 s) and in water depths of 0·5–5·0 m. Sediment concentrations are positively correlated with increasing elevation above the bed, but lagged in time. The time lag varies directly with separation distance between measurement locations and inversely with the horizontal component of the near-bed oscillatory velocity. Both the presence of wave groups and the settling velocities of the sediment particules in suspension influence the temporal changes in concentration at a given elevation. Sediment concentrations appear to respond more slowly to the incident wind-wave forcing with distance away from the bed as a result of two factors: (1) the sequential increase in concentration induced by a succession of large waves in a group; and (ii) the relative increase in finer sediments with smaller settling velocities. Bedforms interact with the near-bed horizontal currents to impose a distinct constraint upon the timing of suspension events relative to the phase of the fluid motion, and, therefore, the vertical structure of the suspended sediment concentration at a range of time scales. The near-bed concentrations appear to be strongly dependent upon the vertical convection of sediment associated with the ejection from the wave boundary layer of separation vortices generated in the lee of ripple crests. Concentration gradients in the presence of vortex ripples are large, as are the correlation between concentrations measured at different elevations within the fluid.     

Ribbon sandstones in the Pennsylvanian Waddens Cove Formation, Sydney Basin, Atlantic Canada: the influence of siliceous duricrusts on channel-body geometry

Channelized bodies up to 9 m thick in the Pennsylvanian Waddens Cove Formation show low width: thickness ratios (8:1 to 14:1), up to four vertically stacked storeys, and deep incision into associated floodplain strata. The presence of lateral accretion sets up to 6 m thick indicates that the migration of bank-attached bars was a major channel-filling process. The progressive rise in elevation of the basal part of the accretion surfaces where the sets adjoin the steeply inclined sides of the channel bodies shows that the channel floor aggraded progressively as the bars approached the channel sides. In planform, the river system probably showed a low-sinuosity, incised valley within which the channel followed a more sinuous and partially confined course. The alluvium surrounding the channel bodies includes sandstone sheets attributed to crevasse splay and levee accumulation. The upper strata of many sheet's and some channel bodies contain siliceous duricrusts (ganisters) which formed by pedogenic lithification of sandy material commencing shortly after the landforms became inactive. The channel bodies contain duricrust-bearing slumpblocks and show stepped margins over duricrusts. The stepped nature of the banks suggests that duricrusts were an important factor in confining the reach, and we suggest that channel-body geometry was influenced, although not necessarily controlled, by the presence of the lithified layers. Alternation in the Waddens Cove Formation of grey, coal-bearing zones with red, duricrust-rich zones is attributed to water-table fluctuation in response to base-level changes. The low width: thickness ratios and aggradation mode'of the channel bodies may in part reflect channel incision and subsequent aggradation resulting from these allocyclic events.     

1988 Compilation of Elemental Concentration Data for USGS Basalt BCR-1

Concentration data on up to 82 individual constituents in USGS Basalt BCR-1 have been collected from 1395 journal articles and technical reports. These data are summarized in consensus (mean) values with uncertainties expressed as ± one standard deviation. Mean values are also calculated as a function of analytical procedure and all raw data are given in the tables. Recommended values are proposed based upon data criteria used by NIST (National Institute of Standards and Technology, formerly the National Bureau of Standards or NBS).     

Extrusive Carbonatites from the Uyaynah Area, United Arab Emirates

Carbonatites occur in the Uyaynah area, United Arab Emirates,within a tectonic window of oceanic metasediments beneath theSemail Ophiolite Complex at the northern end of the Oman Mountains.The carbonatites form conformable layers, pods, and lenses,up to 10 m thick, associated with deep-sea sediments that includeradiolarian cherts and pillow lavas. Although disrupted duringdeformation, the carbonatites are internally undeformed andcontain abundant lapilli, indicating an extrusive, subaerialorigin, probably on a small volcanic island. The lapilli comprisecalcite, abundant Sr-bearing apatite and iron oxides in a calcitematrix. Alkali amphiboles, biotite, chlorite, and allanite wereproduced as a result of metamorphism but otherwise the primaryigneous carbonatite mineralogy remains. One distinct group ofrocks also contains primary calcic amphibole and biotite. Niobiantitanite, strontian baryte, and albite are also present, andrare earth elements are held in abundant allanite-(Ce) and raremonazite-(Ce). Analyses of 26 rocks define two groups whichare distinguishable in the field. One group consists of silico-carbonatitescontaining primary calcic amphibole, biotite, and abundant allanite,and is chemically similar to average intrusive ferrocarbonatite.The other group corresponds chemically to average intrusivecalciocarbonatite. Unlike other extrusive carbonatites describedin the literature, the Uyaynah carbonatites have higher incompatibleelement abundances than average intrusive carbonatites and arenotably rich in rare earth elements (up to 2?6 wt.%) and P2O5(average > 7 wt.%). The two carbonatite groups are consideredto be related magmatically one to the other, and the presenceof rare ferroan chromian spinel is interpreted as evidence fora direct mantle origin.     

STATISTICAL EVALUATION OF MT AND AMT METHODS APPLIED TO A BASALT-COVERED AREA IN SOUTHEASTERN ANATOLIA,TURKEY*

The efficacy of the magnetotelluric and audiomagnetotelluric (MT/AMT) methods for detailing the structure of a hypothetical geological section is investigated by using the singular value decomposition (SVD) technique. The section is representative of southeastern Turkey, which is mostly covered by basalt and is a prime area for oil exploration. One of the geological units, the Germav shale at a depth of 600 m, is a problem layer for electromagnetic surveys because of its very low resistivity (on average 3 Ωm) and highly variable thickness across the area (200–900 m). In the MT frequency range (0.0004–40 Hz) its total conductance—or, since its resistivity is known from resistivity log information, its thickness—is the best resolved model parameter. The total depth to the Germav shale and the resistivity of the Cambrian/Precambrian basement are the marginally resolved parameters. In the AMT frequency range (4–10000 Hz) the resistivity of the surface basalt layer strongly affects the resolution of the other, less important, model parameters which are the total depth to the Germav shale and the total conductance of the Germav shale. The errors in the measurements determine the number of model parameters resolvable, and are also important for interpretation of the geological model parameters to within a desired accuracy. It is shown that statistical evaluation of the MT and/or AMT interpretations by using an SVD factorization of the sensitivity matrix can be helpful to define the importance of some particular stage of the interpretation, and also provides a priori knowledge to plan a proposed survey. Arrangements of MT and AMT observations, together with some Schlumberger resistivity soundings, on a large grid will certainly provide three-dimensional detailed information of the deep geoelectric structure of the area.     

The Composition of Garnets from Pelitic Schists in relation to the Grade of Regional Metamorphism

Analyses of garnets are presented from a wide variety of metamorphicterrains, in relation to which there appears to be a regularpattern of substitution of (FeO+MgO) for (CaO+MnO), the valuesof these components reflecting the metamorphic grade of thepelitic schists. This provides a method for indicating variationsin grade in metamorphic terrains and for comparing the variationsin different areas. In areas of repeated metamorphism this wouldappear to have a particular value in establishing the gradeof the various episodes of metamorphism. It is also demonstratedthat by the determination of selected physical propertics (unitcell edge a and refractive index) of garnets in the peliticschists, and evaluating the significance of their variations,it is possible to work out the local changes of metamorphicgrade within a particular area.     

Glacial landforms on German Bank, Scotian Shelf: evidence for Late Wisconsinan ice-sheet dynamics and implications for the formation of De Geer moraines

The extent and behaviour of the southeast margin of the Laurentide Ice Sheet in Atlantic Canada is of significance in the study of Late Wisconsinan ice sheet-ocean interactions. Multibeam sonar imagery of subglacial, ice-marginal and glaciomarine landforms on German Bank, Scotian Shelf, provides evidence of the pattern of glacial-dynamic events in the eastern Gulf of Maine. Northwest-southeast trending drumlins and megaflutes dominate northern German Bank. On southern German Bank, megaflutes of thin glacial deposits create a distinct northwest-southeast grain. Lobate regional moraines (>10km long) are concave to the northwest, up-ice direction and strike southwest-northeast, normal to the direction of ice flow. Ubiquitous, overlying De Geer moraines (<10 km long) also strike southwest-northeast. The mapped pattern of moraines implies that, shortly after the last maximum glaciation, the tidewater ice sheet began to retreat north from German Bank, forming De Geer moraines at the grounding line with at least one glacial re-advance during the general retreat. The results indicate that the Laurentide Ice Sheet extended onto the continental shelf.     

Subtropical to temperate facies from a transition zone, mixed carbonate–siliciclastic system, Palaeogene, North Carolina, USA

Palaeogene passive margin sediments on the US mid‐Atlantic coastal plain provide valuable insight into facies interaction and distribution on mixed carbonate–siliciclastic shelves. This study utilizes well cuttings, outcrop, core, and seismic data to document temporal and spatial variations in admixed bryozoan‐rich skeletal carbonates and sandy siliciclastic units that were deposited on a humid passive margin located in the vicinity of a major marine transition zone. This zone was situated between north‐flowing, warm waters of the ancestral Gulf Stream (carbonate dominated settings) and south‐flowing, cold waters of the ancestral Labrador Current (siliciclastic dominated settings). Some degree of mixing of carbonates and siliciclastics occurs in all facies; however, siliciclastic‐prone sediments predominate in nearshore settings, while carbonate‐prone sediments are more common in more open marine settings of the inner shelf break and deep shelf. A distinctive dual‐break shelf depositional profile originated following a major Late Cretaceous to Palaeocene transgression that drowned the earlier shallow platform. This profile was characterized by prominent mid‐shelf break dividing the shallow shelf from the deep shelf and a major continental shelf/slope break. Incomplete filling of available accommodation space during successive buildup of the shallow shelf preserved the topographic break on this passive margin. Storm wave base also contributed to the preservation of the dual‐break shelf geometry by beveling shallow shelf sediments and transporting them onto and seaward of the mid‐shelf break. Sediment fines in deep shelf facies were produced in place, transported downdip from the shallow shelf by storm ebb currents and boundary currents, and reworked from adjacent areas of the deep shelf by strike‐parallel boundary currents. Regional climate and boundary currents controlled whether carbonate or siliciclastic material was deposited on the shelf, with warmer waters and more humid climates favouring carbonate deposition and cooler, more arid conditions favouring glaucony and siliciclastic dominated deposition. Continuous wave and current sweeping of the shallow shelf favoured deposition of mud‐lean facies across much of the shallow shelf. Skeletal components in much of the carbonate‐rich strata formed in warm, nutrient‐rich subtropical waters, as indicated by widespread occurrences of larger benthic foraminifera and molluscan assemblages. These indicators of warm water deposition within the bryozoan‐mollusk‐rich carbonate assemblage on this shelf provide an example of a warm water bryomol assemblage; such facies generally are associated with cooler water depositional settings.